Last up date

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

The Milan salt and pepper mill set from the AdHoc brand is a sophisticated and efficient solution for seasoning with style and precision. 
This electric set combines a modern and practical design, perfect for those looking for functionality and sophistication in the kitchen.

Intuitive operation: automatic activation by tilting the grinder 90°, no buttons required.

Integrated LED light: illuminates the work area, enabling accurate dosing of spices.

Functional design: by tilting the grinder upwards, you avoid soiling the work surface.

Grinding adjustment: infinitely variable system via a lower knob, for fine or coarse grain.

High-quality materials: CeraCut® ceramic grinders, corrosion-resistant, durable and odourless.

Materials: plastic, acrylic, CeraCut® ceramic millstones.

Dimensions: height 19 cm, diameter 6.5 cm.

Thickness adjustment: turn the screw underneath (clockwise for fine grinding, anti-clockwise for coarse grinding).

Cleaning: use a soft, dry cloth. Do not immerse or get the device wet.

The Flexi®Form biscuit mould is perfect for making star-shaped biscuits, ideal for Christmas treats and other special occasions. 
Made of silicone, it allows for easy removal of biscuits without sticking. 
This mould can be used to make 15 star-shaped biscuits with each use.

Dimensions: 17 x 30 cm.

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Small and compact. 
The small MINIMILL powerhouse adds flavor to your dishes. 
The CeraCut® high-performance ceramic grinder, odorless and tasteless, absolutely free of rust and wear, can be adjusted from coarse to fine like a large grinder, making it the world's smallest adjustable grinder!
The elegant combination of stainless steel and acrylic glass proves that even small things can have real greatness. By the way: thanks to its small size and weight, fine and noble spices can also be enjoyed freshly ground! 

- High-quality stainless steel and acrylic grinder
- With CeraCut® high-performance ceramic grinder
- Infinitely variable grinding level adjustment, compact size

Height: 6.2 cm

Diameter: 3.2 cm

ALSO AVAILABLE IN BLACK AND WHITE UPON REQUEST.

AdHoc - Garlic press with chopping board - ROCCAALIO 

Fresh garlic enhances many dishes and is very healthy.

For all fans of the big bulb, AdHoc now presents 'RoccaAlio', the new garlic press with cutting board. 

It crushes garlic effortlessly for uniform results and the best possible flavours, because here it is pressed, not crushed.

The 'GridCut' laser-cut stainless steel blade with a large working area achieves an efficient result.

The elegant 'RoccaAlio' designed by Robert Franzheld is practical and ergonomic to use; its handle made of high-quality acacia wood is comfortable to hold. In addition, the solid cutting board is made of robust, natural and food-friendly acacia wood: thanks to its antibacterial properties, the wood is particularly suitable for use with food.

The high-quality product is dishwasher-safe so that it can be used for multiple purposes related to delicious garlic-flavoured dishes.

Press instead of squeeze

Manageable and ergonomic to use

Because of its antibacterial properties, the wood is particularly suitable for food use

Not suitable for the dishwasher.

Salad lacking a little spice?

It's all right if the 'AromaPour' oil/vinegar dispenser is at hand.

At the table or in the kitchen, this new high-quality product from AdHoc offers the best olive oil, tasty pumpkin seed oil, fine vinegar and much more to taste.

Just lift, pour and put down with one hand: this dispenser is really practical to use!

The 'AromaPour' is made of absolutely tasteless borosilicate glass and combines four functions in one.

A non-drip spout directs the drops collected in the bottle through the centre of the dispenser, the integrated 'GravitySeal' ball-lock seals safely and cleanly, a stainless steel filter on the inside retains herbs, chillies etc. during pouring, and the special 'PreciseFlow' ventilation system ensures reliable and economical pouring and dosing.

Another advantage is that this premium dispenser has a large opening and is therefore easy to fill; its capacity is approx. 500ml.

All parts can be placed in the dishwasher for cleaning.

For the best olive oil, tasty pumpkin seed oil, the best vinegar and much more.

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

A good salt and pepper mill set is one of the most important items in your kitchen - there are not many meals where you don't use them. The beautiful design and practical nature of the TEXTURA salt and pepper mill set from Adhoc is understandably popular given the perfect grinding results that put it in a class of its own.

The reason for this is that the mills are made using odourless and tasteless CeraCut® high-performance ceramic grinding mechanisms that won't rust or wear. The grinding setting is infinitely adjustable, from very fine to beautifully coarse.

The TEXTURA salt and pepper mill provides perfect seasoning for every dish.

Details

Size (H x ø): 15 x 5 cm

Weight: 410 g

Material: Painted beech wood, stainless steel

Colour: dark green / light green wood colours

Features High-performance CeraCut® ceramic grinder that won’t rust or wear.

Continuous grinding adjustment from fine to coarse 30-year warranty* on the CeraCut® grinding mechanism

Included in delivery AdHoc TEXTURA Salt and Pepper Mill, Set of 2.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

WINE AND CHAMPAGNE COOLER WINE

Nothing beats a good glass of wine with nice people and good conversation. It's just a pity that the matching delicious grape juices then always get far too warm so quickly! This is where we need the "Vine" wine, sparkling wine and champagne cooler from AdHoc. It keeps pre-cooled wine or sparkling wine at serving and drinking temperature for around two to three hours - giving us more time and leisure to enjoy fine wines.

The "Vine" works with NaturalChill, which means long-lasting cooling thanks to the natural insulating properties of wood and the outstanding cooling performance of stainless steel.

With its elegant material mix of high-quality acacia wood and brushed stainless steel designed by Robert Franzheld, the "Vine" cooler fits into any ambience. It is suitable for standard bottles up to 10.5 cm in diameter and also for cooling bottles of water or other drinks.

Vine collection

Material Acacia wood and stainless steel

Design: Robert Franzheld

Colour natural

Height 19.5 cm

Diameter 13.5 cm.

POURER AND STOPPER CASQ The "CasQ" series from AdHoc offers wine lovers three practical and beautifully designed products for sealing, pouring and storing their favourite drink. Also perfect as a gift, preferably together with a selected good drop! This drip-free pouring funnel made of oak wood, stainless steel, food-safe silicone and plastic enables accurate pouring and directs any collected drops back into the bottle. In a further function, the silicone stopper ensures a tight, secure and clean seal.

This AdHoc product from the "CasQ" series also prevents further aeration of the wine. Its extremely flat design is ideal for storage in the fridge door. Suitable for all types of wine, especially for red and white wine, but also for pouring olive oil or balsamic vinegar. Collection CasQ Material Oak wood, stainless steel, plastic and silicon

Design: Robert Franzheld

Colour :  natural

Height : 6,4 cm

Diameter :  4,9 cm.

Once uncorked, champagne bubbles give off zesty, sweet notes as the effervescent beverage explodes on the palate. On the rare occasion that your champagne goes unfinished, the GUSTO Champagne Stopper and Saver will help you preserve what’s left for later enjoyment.

GUSTO CHAMPAGNE STOPPER AND SAVER

The GUSTO Champagne Stopper and Saver’s silicone stopper and retaining clamp provide an ultra-tight vacuum seal that not only preserves your champagne’s taste and bubbles but is also leak-proof. Lay your bottle on its side worry-free or store it in the refrigerator door thanks to the uniquely flat, low-profile design. Either way, the AdHoc GUSTO Champagne Stopper and Saver extends the life of an open bottle of champagne and makes it possible to enjoy it again in the future without waste.

Features

Virtually leak-proof

silicone stopper and retaining clamps

Preserves an open bottle of champagne’s taste and bubbles

Allows horizontal bottle storage in your refrigerator without leaking

Extremely flat, low-profile design 

bottle easily fits upright in the refrigerator door

Product Details

Primary Material: Plastic/Silicone

Dimensions:

Diameter: 3.22 inches

Height: 0.66 inches

Warranty

All AdHoc products come with a limited two-year warranty. This warranty does not cover damage caused by accident, misuse, abuse, commercial use, or normal wear and tear.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

AdHoc - Icebar Wine Cooling Stick

The ice cooler for the inside of the bottle

With the stainless steel Icebar cooling rod from the AdHoc brand, drinks of all kinds, especially wine, can be cooled in the bottle without watering it down. The Icebar cooling rod seals the bottle practically airtight and clean and thus prevents further aeration of the wine. This ensures longer taste and freshness. When pouring the drink, the practical wine accessory can simply remain in the bottle and thus leaves no traces on the table. For the perfectly chilled drink and an optimal result, the Icebar chilling stick should chill in the freezer for at least 2 hours.

Special feature

Cools drink in the bottle

for all types of drinks

seals bottle airtight

Details

Material: stainless steel, silicone

Dimensions: H 28 x Ø 1,6 cm

Care instructions: clean by hand, not dishwasher-safe.

• Aromatize with one hand by pressing the button
• 6 rechargeable batteries included
• Charger with saucer
• Continuous grind adjustment from fine to coarse
• High-efficiency grind
• With LED

Recommended use: Grinding pepper or salt.

Country of manufacture: China

Material: Stainless steel/acrylic/silicone

Diameter: 6cm.

Size: 22.3cm.

Packaging: Cardboard box

AdHoc - YASO pepper or salt mill, natural wood dark oak, height: 17 cm

Thanks to the easy-to-move handle, it is always ready to use at the dining table, in the kitchen or outdoors.

Rust- and wear-free ceramic grinder for best aroma development and infinitely variable grinder adjustment.

PreciseDrive system, specially developed for the best possible concentricity and a continuous grinding result.

Diameter: 6 cm / Height: 17 cm | Fill the mill by simply pulling off the top.

Always a great seasoning companion for outdoor cooking, grilling or BBQ!

Pepper / salt mill "Yaso" - ready for seasoning anywhere thanks to the carrying handle! Design: Robert Franzheld

The design company AdHoc surprises again and again with good ideas.

Now the "Yaso" salt / pepper mill is equipped with an attractive carrying handle made of hard-wearing and tear-resistant natural fibre.

Now the spice mill is easy to transport and always ready to hand - in the kitchen as well as at the table. At the same time, it is the ideal seasoning companion for outdoor cooking or a hearty barbecue.

Yaso" always cuts a fine figure - thanks to its unique design, which harmonises perfectly with any modern or classic ambience. It is made of oiled oak wood and its organic shape is super comfortable to hold. You can choose between light or dark wood.

Another decisive advantage: the mill works with the rust- and wear-free CeraCut® high-performance ceramic grinder, which is also odourless and tasteless. This produces a perfect grinding result while preserving the unadulterated aroma of the spices to be ground.

Function, aesthetics, quality and good taste - a strong quartet that sets the tone at AdHoc. Innovation meets "Design made in Germany".

AdHoc - Acrylic/ Wood salt-pepper mill set

AD-HOC

Spice mill using the cerastar ceramic article allows for optimal grinding results. The ad-hoc pepper grinders are all equipped with a self-locking safety screw for adjusting the thickness of the grinder.

Thanks to the locking of the grinder, you will avoid having remnants of the grind on the supporting surface. You can grind the following dried substances: black pepper, coarse salt, comino, garlic, rosemary, oregano, various spices, mustard grains, anise, coriander, cloves and chocolate.

Features: Pepper mill or salt mill , supplied with a high quality ceramic grinder "CeraCut", which is odorless, tasteless, stainless and absolutely corrosion resistant, with continuous grinding adjustment from fine to coarse.

Dimensions cm. 13

Adhoc - Tabletop arc lighter

• Flameless ignition of candles, wind lanterns, grills, gas ovens, etc.
• Ignition even in high wind conditions.
• Extra long ignition neck allows ignition from a safe distance.
• Rechargeable, includes USB charging cable and LED charging display.
• Safe and energy efficient.
• Material: plastic/stainless steel.

AdHoc - Milk/sauce frother - RAPID 3

RAPID 3 MILK AND SAUCE FROTHER IN DIFFERENT COLOURS

High-quality milk and sauce frother

Easy to use, starts at the push of a button

Suitable for: milk, sauces, vinaigrettes, soups, cocktails and more

Easy to clean thanks to removable whisk and practical container 2 x 1.5 V AAA batteries included

Material: plastic/stainless steel

Height: 20 cm

Diameter: 3.2 cm.

AdHoc - Pepper- or salt spinning mill SPIN- MP303

 Ceramic grinder CeraCut® acacia wood/plastic

D: 8.5 cm, H: 18.5 cm

Design: AdHoc Design Team.

With innovative system to adjust the grinding setting and grinding distribution

Suitable for the most varied types of salt and pepper

With odor- and taste-free as well as absolutely corrosion- and wear-free high-efficiency ceramic grinder CeraCut®

Removable knob for easy filling

Precise dosing of the ground product through outlet slot

Setting disc to adjust grinding setting and as grinding mechanism cover Fully adjustable from fine to coarse Setting disc keeps the working surface clean

The setting disc can be unscrewed and removed for cleaning.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

AdHoc - Spice Box POTTA

Spice box Potta

Practical spice box made of cast iron and acacia wood

Suitable for up to 3 different types of spices

Easy push-to-open principle

Non-slip

Length: 17 cm

Width: 7,2 cm

Height: 4,5 cm

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Diamond sharpener excellent for recovering the sharpness of blades with particularly hard steels

Rod length of 30cm. and total length of 43cm.
Thermoplastic handle and steel ring.

Quality level: high

Diamond sharpening with two different sharpening grits.

The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.

For cleaning, use dish soap and warm water.

Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.

Dimensions of the diamond part:
10 cm x 2 cm

Total open size with plastic handle:
22 cm

Closed size:
12 cm x 3 cm
Weight: 67 gr

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Adhoc - Glass tea infuser - FUSION

For crystal clear tea enjoyment! The FUSION glass tea filter offers enough space for loose-leaf tea and fresh ingredients such as ginger, lemon, spices and more. Made of absolutely tasteless, heat-resistant and sustainable borosilicate glass, the FUSION is the ideal tool for your cup of tea. The last drops are collected after use by the glass holder. Tea lovers know that the pleasure of drinking tea starts with the pouring of the relaxing hot drink. With her design of the FUSION tea filter, designer Gabriele Kaltenbach ensures that even the eye is involved in this promising connection between hot water and tea leaves or herbs right from the start. The borosilicate glass offers a clear view. The FUSION tea filter is easy to fill and just as easy to close, thanks to the flexible, tasteless silicone lid The silicone arm of the lid is another typical AdHoc feature: it can be easily attached to the handle of the cup, and after sufficient brewing time, makes removing the tea filter child's play. This makes tea enjoyment simple and perfect!

FUSION glass/silicone tea filter D: 5.5 cm, H: 7 cm, drip tray D: 6.5 cm, H: 3.7 cm

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -