Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Kanetsune Seki produces traditional, high-quality kitchen spoons, suitable for daily use. These cuchillos are the result of the skill of craftsmen who implement scrupulous techniques. Our quality guarantees products that are exceptionally durable, sharp and of extraordinary beauty.

These cuchillos are destined to continually improve, fusing new ideas with traditional techniques transmitted over more than 800 years. Kitasho Co., Ltd. was founded in 1964 in the city of Seki, Japan, known as "The City of Swords", both nationally and internationally.

We constantly strive to offer short, durable and useful items, renewing our commitment to innovation in keeping with new times.

The range of products includes kitchen spoons, navajas, camping spoons, high-end cooking spoons for even the most refined palates, as well as tigers and shorts, and everyday items.

Intended use: home/collection

Type of artesanal production
Hoja: 33 head sanmai maple with Hitachi Aogami 64HRC carbon wire and 1095 brut de forge carbon maple shells.
Production of Japanese spoons
Mango: en madera de roble
Hoja length: 245 mm.
Hole thickness: 6 mm.
Closed length: -
Total length: 410 mm.
Balance: in the guard branch
Weight: 538g.
Cierre: -
Videos: -
Funda: madera de roble
Package: Black and red cardboard box with Kanetsune logos.
Note:-

Characteristics of San Mai Maple: These are different types of metals combined to create a composition that contains and intensifies the resistance of the metals individually:

- Mayor vida útil del filo
Thanks to the use of very high quality maples with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core of the plate (Core Steel), the heat, once templada, has a hardness and a Decidedly superior court performance. which were achieved with the use of traditional maple trees.

- Mayor resilience
Built according to the principle of Japanese swords, the multi-headed maple is difficult to break thanks to the hardness of the central maple (Core Steel) and the elasticity of the maple used for the lateral covering (Stainless Steel).

- Better resistance to corrosion
The maple used for the external caps (Stainless Maple) guarantees the house a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves resistance to corrosion, including in the steel.

- Easy processing including after heat treatment
Although the maple is normally hardened after the tempering, the lateral maple used in the multi-head process does not become softer and allows for easy mechanicalization, cutting or soldering even after the heat treatment. For optimal health performance, cryogenic treatment is recommended.

- Improved aesthetic result
The cuchillos made with multi-layered maple or with damask pattern are aesthetically elegant, refined and much appreciated by collectors around the world at the end of the manufacturing process.

For more information: collinsteel

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Multi-purpose vegetable and fruit knife. Thanks to the wooden case (shirasaya), similar to the one used for the katana or the tanto, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: 420J2 steel
Japan blade production
Handle: cherry wood
Blade length: 105mm.
Blade thickness: 1mm.
Total length: 210mm.
Balancing: -
Weight: 36g.
Sheath: cherry wood sheath
Note:

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Traditional Japanese carving knife "Kogatana" used in gardening, as a knife from the innseto or even for a walk and with a sharp blade only on one side. Thanks to the wooden case (shirasaya), similar to that used for the katana or for the time being, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: SK5 carbon steel
Lama Japan production
Handle: cherry wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 165mm.
Balancing: -
Weight: 44g.
Sheath: cherry wood sheath
Note:

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Intended use: Tactical

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson

The BlademedicTM Knife Sharpener is the first responder for field repairs on all types of knife blades. It’s like having an entire sharpening kit right in your pocket - able to tackle regular or serrated blades, gut hooks, hunting, fishing, - just about any knife using one or all of the following elements:


Tungsten Carbide
Just three or four strokes will restore your blade.

Ceramic Sharpening Rods
Polish to a finished edge in three or four strokes.

Serrated Knife Sharpener
Designed to get inside even the smallest serrations.

Diamond Tapered Rod
For fast reconditioning and maintenance.

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

COMFORTABLE TO WEAR !

The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.

PLEASURE OF USE

The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.

HIGH LIGHT

The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .

SCREW ANTI-SLIP

In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .

THE HOLE WITH WINGS WINGS PIVOT HOLE

This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .

CURVE LIFESAVER !

Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .

SAFETY FIRST !

The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .

THE NAME

The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.

Intended Use : Sport / EDC

Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 63 copies

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The simplicity of DROP STOP solves one of the most annoying inconveniences of pouring wine.
By rolling up the diskette and inserting it into the neck of the bottle, the thin wire of DROP STOP will perfectly cut the drop, so it won't soil the tablecloth.
Effective and 100 percent reusable Drop Stop is made of aluminum coated with food-grade PVC and therefore does not alter the taste of the wine.
Now the new drop stop also becomes an aerator,the wine can also breathe, in fact it oxygenates the wine releasing the aromas and enhancing the taste and allows it to be served without spilling drops.
The package includes 2 drop stops.