Last up date

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended Use: Hunting / Sporting

Type of production: Hand
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: birch burl, bone and brass bolsters
Blade length: 85mm.
Blade Thickness: 3mm.
Overall length: 195mm.
Balancing: backward
Weight: 74g.
Sheath: Brown leather
Notes: -

Intended Use: Hunting / Sporting

Type of production: Hand
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: Leather rings, bone, bolsters and spacers Brass
Blade length: 76mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balance: on guard branch
Weight: 108g.
Sheath: Brown leather
Notes: -

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Use: Heavy Utility / Hiking

Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle: Canvas Micarta
Blade length: 160mm.
Blade Thickness: 5mm.
Overall length: 280mm.
Balance: the branch guard
Weight: 360g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero Spain

Intended Use: Hiking / Hunting

Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle material: teak wood
Blade length: 90mm.
Blade Thickness: 5mm.
Overall length: 203mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 180g ..
Sheath: Brown leather with built-in sharpener
Packaging: cardboard box with logos Azero Spain

Intended Use: hiking / hunting

Type of production: industry
Blade: full tang, steel D2 58 / 60HRC
Treatment Blade: satin
Production Lama: spain
Handle: cocobolo wood
Blade length: 100mm.
Blade Thickness: 5mm.
Overall length: 225mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 260g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero Spain

This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 35g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Roman Ring with polished horn cattle R-RMC30A - knife

Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

Intended Use: Collection

Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Zuava Cattle Polished R-ZVC16 - knife

Craft knife regional product in Scarborough, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all work

Handle: polished horn cattle
Blade: Stainless 440A
Total length: 16 cm
Blade Length: 7,5 cm

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 200mm.
Weight: 60g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali

Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

The shape reached today derives from ancient styles used in past times.

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Brotzu horn 27cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 120mm.
Total length: 270mm.
Weight: 102g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.