Last up date
-
Puma - Cougar '80s Vintage NOS Full Set - 154CM & Jacaranda Wood - 12 6500 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM).
Intended Use: Collection / Vintage / Tactical
Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand newPU-COUJHW-CP€901.64Only 1 leftOnly 1 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
G.A.T. - Gatpuccino - All in One - Cappuccino - Espresso
G.A.T. - Gatpuccino (articles FOR house) Cafe Caffe is a brand that includes a collection of mock expressed high quality designed for the coffee lover Italian. The entire collection Cafe Caffe is distinguished by Italian design and manufacture. WHAT 'GATPUCCINO? It 'the first product that allows you to bring the true taste of Italy to your home: cappuccino, espresso, latte macchiato, hot chocolate ... all in one article! The GatPuccino is the combination of the classic Italian mocha and a bollilatte (editor) can heat and mount milk, coffee and chocolate. Both are based on an electrical basis and can work simultaneously or individually through two simple buttons equipped with LEDs with different colors.5347GC€89.34Only 3 leftOnly 3 left
-
G.A.T. - Seals with original filter for Coffee G.A.T. 3-4 CUPS
Ricambio per caffettiera G.A.T. da 3 tazza in alluminio o 4 tazze in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.5347-3G€2.46Only 2 leftOnly 2 left -
G.A.T. - Seals with original filter for Coffee G.A.T. 1-2 CUPS
Ricambio per caffettiera G.A.T. da 1 tazza in alluminio e 2 tazze in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.5347-1G€2.05Only 10 leftOnly 10 leftOut of stock -
G.A.T. - Aluminum Coffee Maker - Moka Magnifica - 6 tz - also for induction
Home Sweet Home. The Magnifica mocha, with its wood-effect knob and handle, is to create a warm family atmosphere because, the elegance given to it by the special mirror polish treatment and its adaptability to any heat source, make it unique in the kitchen. Cafè Caffe is a brand that includes a collection of high-quality espresso mokes designed for customers who love Italian coffee. The entire Cafè Caffe collection is distinguished by Italian design and manufacture. The models are packaged in an elegant box that recalls the preciousness of gold and the aroma of coffee. AVAILABLE MEASURES: 1-3-6-9 cups SOURCES OF HEAT: induction, fire, ceramic glass, electric hot plate.
5347-6€27.05Only 6 leftOnly 6 left -
FURminator - My FURst Waterless Spray Shampoo 250ml - Specific for Puppies
DESCRIPTION:
Dry shampoo for puppies enriched with Omega 3 & 6, Vitamin E, Chamomile, Papaya and Aloe Vera; gentle formula for frequent use that cleanses the coat and alleviates odor formation until the next bath, sold in convenient 250ml spray bottle.INFORMATION:
Made in the USA with low-impact processes in eco-certified companies, it contains no paraben and its derivatives nor chemical preservatives or dyes.USAGE:
Spray generously on coat and then wipe with a clean, dry cloth. No rinsing is necessary. Repeat if necessary.WARNINGS:For external use on animals over 6 weeks of age. Avoid contact with the eyes. If irritation occurs, discontinue treatment and consult a veterinarian.
INGREDIENTS:
Natural Surfactants, Water, Hydrolyzed Wheat Protein, Hydrolyzed Oat Protein, Omega 3 & 6 Fatty Acids, Kava Extract, Calendula Extract, Vitamin E, Chamomile Extract, Aloe Vera, Papaya Leaf Extract, Safflower Seed Oil, Sunflower Seed Oil, Glycerin3559-PSS25Special Price €5.68 Regular Price €8.11Only 3 leftOnly 3 left
-
FURminator deLuxe per cani medium size a pelo corto - spazzola professionale per la tolettatura
Indicato per cani a pelo corto di taglia media, con peso da 9.5 a 23kg
FURminator ha stabilito gli standard nella categoria con un innovativo strumento per la tolettatura che riduce la perdita di pelo meglio di qualsiasi spazzola, pettine o pettine a rastrello.
COSA FA ?
Rimuove con estrema efficacia il pelo morto ed il vello (sottopelo) dall'animale.
COME FUNZIONA?
Come una normale spazzola: basta infatti pettinare l'animale nel verso del pelo, senza imprimere forza o pressione, con movimenti naturali e fluidi.
MA TAGLIA IL PELO ALL'ANIMALE?
Assolutamente no, si limita a rimuovere il pelo morto già presente nel mantello.
VA A BATTERIE?
No, si tratta di una particolare spazzola con pettine metallico che cattura e rimuove il pelo.
PUO' FERIRE L'ANIMALE?
Assolutamente no, il pettine in acciaio è infatti concepito per essere confortevole e per non creare abrasioni o fastidi in fase di utilizzo.
RICHIEDE MANUTENZIONI PARTICOLARI?
Va trattato come una normale spazzola da grooming e da toelettatura, senza particolari manutenzioni.
CARATTERISTICHE
- Riduce la perdita di pelo fino al 90%, rimuovendo il sottopelo e i peli morti senza danneggiare il pelo di copertura.
- Risultati ottimali su cani e gatti a pelo lungo o corto provvisti di sottopelo.
- Stimola gli oli naturali presenti nel mantello dell'animale per un effetto sano e lucente.
- Riduce il numero di particelle presenti nell'aria che possono indurre reazioni allergiche.
- Aiuta ad eliminare i boli di pelo nei gatti
- Non taglia
ISTRUZIONI DELL'ATREZZO
Dal momento che lo strumento FURminator deShedding provoca la rimozione di una quantità notevole di pelo, posizionare l'animale all'aperto.
Con il bordo e i denti del dispositivo rivolti verso il mantello, passare CON DELICATEZZA lo strumento sul mantello dell'animale seguendo la direzione della crescita del pelo.
Il tempo necessario alle operazioni di rimozione del pelo con lo strumento FURminator deShedding varia a seconda della razza e delle condizioni del mantello.
In caso di perdita di pelo eccessiva, causata da problemi di salute o da una dieta errata, consultare un veterinario.
Lo strumento FURminator è progettato per la rimozione del mantello invernale.
Il bordo dello strumento FURminator, dotato di un pettine fine e ad alta precisione, deve essere protetto con l'apposito rivestimento qualora non venga utilizzato.
FURminator Inc. declina ogni responsabilità in caso di rottura dei denti del bordo dello strumento deShedding.
Lo strumento FURminator deShedding può essere utilizzato su altri animali di grandi dimensioni, quali ad esempio i bovini ed equini, ad esclusione di criniera e coda.IN OMAGGIO
Shampoo a secco per cani arricchito con Omega 3 & 6, Vitamina E, Calendula ed Aloe Vera, aiuta a sciogliere i nodi negli animali a pelo lungo per poterli spazzolare più facilmente, venduto in pratica confezione spray da 250ml.
INFORMAZIONI:
Prodotto in USA con processi a basso impatto ambientale in aziende eco certificate, non contiene paraben e suoi derivati nè conservanti o coloranti chimici.
USO:
Spruzzare generosamente sul mantello e successivamente strofinare con un panno pulito ed asciutto. Non è necessario risciacquare. Ripetere se necessario.
AVVERTENZE:
Per uso esterno su animali con più di 6 settimane di età. Evitare il contatto con gli occhi. In caso di irritazioni, sospendere il trattamento e consultare un veterinario.
INGREDIENTI:
Natural Surfactants, Water, Hydrolyzed Wheat Protein, Hydrolyzed Oat Protein, Omega 3 & 6 Fatty Acids, Cranberry Seed Oil, Kava Extract, Calendula Extract, Vitamin E, Chamomile Extract, Aloe Vera, Papaya Leaf Extract, Safflower Seed Oil, Sunflower Seed Oil, Colloidal Oatmeal3562€48.28Only 2 leftOnly 2 left -
FURminator brush for extra small size short-haired animals
Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3564€27.87Only 4 leftOnly 4 left -
FURminator brush for extra small size long-haired animals
Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3564L€27.87Only 4 leftOnly 4 left -
FURminator brush for extra large size short-haired dogs - over 45Kg
Extra Large size - suitable for animals over 45 kg.
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3565XC€56.56Only 3 leftOnly 3 left -
Inoxpran - Stainless steel creamer Dolcevita 4 cups
Inoxpran - Stainless steel creamer Dolcevita 4 cups Triple bottom for induction. Steel inox 18-104598T€7.79Only 1 leftOnly 1 left -
G.A.T. - Caffettiera in alluminio - Moka Magnifica - 1 tz
Casa dolce casa. La moka Magnifica,
dal pomolo e manico con effetto legno,
ha lo scopo di creare una calda atmosfera familiare
perchè l'eleganza conferitale dallo speciale
trattamento di lucidatura
la rendono unica in cucina.
Cafè Caffe è un brand che comprende una collezione di moke espresso di alta qualità pensata per l'amante del caffè italiano.
Tutta la collezione Cafè Caffe si distingue per il design e fabbricazione italiana.
I modelli sono confezionati in un'elegante scatola che richiama la preziosità dell'oro e l'aroma del caffè.
MISURE DISPONIBILI: 1-3-6-9 tazze FONTI DI CALORE: fuoco, vetro ceramica, piastra elettric. non va sull'induzione.
5347-1€13.11Only 2 leftOnly 2 left -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Karhunkynsi Puukko - Lappi Birch 85 - knife
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: birch burl, bone and brass bolsters
Blade length: 85mm.
Blade Thickness: 3mm.
Overall length: 195mm.
Balancing: backward
Weight: 74g.
Sheath: Brown leather
Notes: -14170€53.28Out of stock -
Karhunkynsi Puukko - Lappi Leather 75 - knife
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: Leather rings, bone, bolsters and spacers Brass
Blade length: 76mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balance: on guard branch
Weight: 108g.
Sheath: Brown leather
Notes: -14175€77.87Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
G.A.T. - Seals with original filter for Coffee G.A.T. 6 CUPS
Ricambio per caffettiera G.A.T. da 6 tazze in alluminio o in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.5347-6G€2.87Only 0 leftOnly 0 leftOut of stock -
G.A.T. - Aluminum Coffee Maker - Moka Magnifica - 9 tz - induction
Home Sweet Home. The Magnifica mocha, with its wood-effect knob and handle, is to create a warm family atmosphere because, the elegance given to it by the special mirror polish treatment and its adaptability to any heat source, make it unique in the kitchen. Cafè Caffe is a brand that includes a collection of high-quality espresso mokes designed for specialized retailers and coffee shops. The entire Cafè Caffe collection is distinguished by Italian design and manufacture. The models are packaged in an elegant box that recalls the preciousness of gold and the aroma of coffee. AVAILABLE MEASURES: 1-3-6-9 cups SOURCES OF HEAT: induction, fire, ceramic glass, electric hot plate.
5347-9€42.62Only 0 leftOnly 0 leftOut of stock -
Inoxpran - Teapot steel Dolcevita -10 cups
Inoxpran - Teapot steel Dolcevita -10 cups Triple bottom for induction. 18-10 stainless steel with lid Capacity: 95 ml0650K€14.34Only 0 leftOnly 0 leftOut of stock -
Inoxpran - Stainless steel creamer Dolcevita 6 cups
Inoxpran - Stainless steel Creamer Dolcevita 6 cups Triple bottom for induction. Stainless steel 18-10.S1005€9.02Only 0 leftOnly 0 leftOut of stock
