Last up date
-
Lurch - Star Cookie Mould - 15 impressions
The Flexi®Form biscuit mould is perfect for making star-shaped biscuits, ideal for Christmas treats and other special occasions.
Made of silicone, it allows for easy removal of biscuits without sticking.
This mould can be used to make 15 star-shaped biscuits with each use.Dimensions: 17 x 30 cm.
00065020€13.11Only 2 leftOnly 2 left
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
Lurch - Set muffin cuore in silicone 12 pezzi
12 STAMPI PER MUFFINS A FORMA DI CUORECaratteristiche:
in silicone platinico al 100%
per alimenti,
non influenza i sapori,
resistente agli acidi della frutta,
resistente alle temperature da -40 a 240°C
massimo effetto antiaderente
15 anni di garanzia.
Lavabile in lavastoviglie.9314C€11.48Only 1 leftOnly 1 left -
Lurch - juice extractor manual (household items)
Estrattore per succo a freddo e senza utilizzare corrente elettrica, ideale per frutti di bosco e bacche.
Il succo può poi essere consumato puro o allungato, comodo per marmellate, gelatine, gelati ecc. Il gentile, lento movimento di rotazione degli estrattori di succo a freddo produce una maggiore quantità di succo che contiene più vitamine, minerali, enzimi e fibre rispetto ai succhi centrifugati.
Estrattore Succo freddo Lurch Estratore per succo a freddo e senza utilizzare corrente elettrica ideale per frutti di bosco e bacche.
Il succo può poi essere consumato puro o allungato, comodo per marmellate, gelatine, gelati ecc. Il gentile, lento movimento di rotazione degli estrattori di succo a freddo produce una maggiore quantità di succo che contiene più vitamine, minerali, enzimi e fibre rispetto ai succhi centrifugati. • Adatto alla lavastoviglie LURCH è un marchio fresco, innovativo, stimolante, la qualità dei suoi prodotti è alta ed accattivante.
Questo perché l’obiettivo dell’azienda è sempre stato quello di soddisfare l’esigenza del mercato e della clientela, sempre più proiettata verso prodotti funzionali che permettono di divertirsi con la facilità data dall’innovazione. Gli accessori da cucina rivestono la stessa importanza degli ingredienti utilizzati per la preparazione.
Per un’ottima riuscita bisogna che i materiali siano quindi di ottima qualità. Per questo motivo LURCH utilizza esclusivamente silicone platinico prodotto in Germania che permette un’antiaderenza superiore.
LURCH è quindi considerato il produttore tedesco, sviluppatore, innovatore e distributore di prodotti per la cucina e la casa con un posizionamento di alto livello.
8142€36.06Only 1 leftOnly 1 left -
Lurch - Flexiform Advent calendar - Set of 2
Lurch - Flexiform Advent calendar - Set of 2 Lurch - Flexiform Advent calendar - Set of 2 - 17 x 30 cm Made of 100% platinum silicone six different designs In accordance with firm dough as template (back model) used heatable to 260 ° C Dishwasher safe9305€22.05Only 1 leftOnly 1 left -
Lurch - Stampo per biscotti in silicone - inverno
STAMPO PER BISCOTTI INVERNO
Stampo per biscotti FlexiForm invernali ( angelo, albero, pupazzo di neve...)
Da ogni stampo si ricavano 12 biscotti.
Dimensioni: 15 x 30 cm.
Caratteristiche:
in silicone platinico al 100%
per alimenti,
non influenza i sapori,
resistente agli acidi della frutta,
resistente alle temperature da -40 a 240C
massimo effetto antiaderente
15 anni di garanzia.
Lavabile in lavastoviglie.9307€12.79Only 1 leftOnly 1 left -
FURminator - My FURst Waterless Spray Shampoo 250ml - Specific for Puppies
DESCRIPTION:
Dry shampoo for puppies enriched with Omega 3 & 6, Vitamin E, Chamomile, Papaya and Aloe Vera; gentle formula for frequent use that cleanses the coat and alleviates odor formation until the next bath, sold in convenient 250ml spray bottle.INFORMATION:
Made in the USA with low-impact processes in eco-certified companies, it contains no paraben and its derivatives nor chemical preservatives or dyes.USAGE:
Spray generously on coat and then wipe with a clean, dry cloth. No rinsing is necessary. Repeat if necessary.WARNINGS:For external use on animals over 6 weeks of age. Avoid contact with the eyes. If irritation occurs, discontinue treatment and consult a veterinarian.
INGREDIENTS:
Natural Surfactants, Water, Hydrolyzed Wheat Protein, Hydrolyzed Oat Protein, Omega 3 & 6 Fatty Acids, Kava Extract, Calendula Extract, Vitamin E, Chamomile Extract, Aloe Vera, Papaya Leaf Extract, Safflower Seed Oil, Sunflower Seed Oil, Glycerin3559-PSS25Special Price €5.68 Regular Price €8.11Only 3 leftOnly 3 left
-
FURminator deLuxe per cani medium size a pelo corto - spazzola professionale per la tolettatura
Indicato per cani a pelo corto di taglia media, con peso da 9.5 a 23kg
FURminator ha stabilito gli standard nella categoria con un innovativo strumento per la tolettatura che riduce la perdita di pelo meglio di qualsiasi spazzola, pettine o pettine a rastrello.
COSA FA ?
Rimuove con estrema efficacia il pelo morto ed il vello (sottopelo) dall'animale.
COME FUNZIONA?
Come una normale spazzola: basta infatti pettinare l'animale nel verso del pelo, senza imprimere forza o pressione, con movimenti naturali e fluidi.
MA TAGLIA IL PELO ALL'ANIMALE?
Assolutamente no, si limita a rimuovere il pelo morto già presente nel mantello.
VA A BATTERIE?
No, si tratta di una particolare spazzola con pettine metallico che cattura e rimuove il pelo.
PUO' FERIRE L'ANIMALE?
Assolutamente no, il pettine in acciaio è infatti concepito per essere confortevole e per non creare abrasioni o fastidi in fase di utilizzo.
RICHIEDE MANUTENZIONI PARTICOLARI?
Va trattato come una normale spazzola da grooming e da toelettatura, senza particolari manutenzioni.
CARATTERISTICHE
- Riduce la perdita di pelo fino al 90%, rimuovendo il sottopelo e i peli morti senza danneggiare il pelo di copertura.
- Risultati ottimali su cani e gatti a pelo lungo o corto provvisti di sottopelo.
- Stimola gli oli naturali presenti nel mantello dell'animale per un effetto sano e lucente.
- Riduce il numero di particelle presenti nell'aria che possono indurre reazioni allergiche.
- Aiuta ad eliminare i boli di pelo nei gatti
- Non taglia
ISTRUZIONI DELL'ATREZZO
Dal momento che lo strumento FURminator deShedding provoca la rimozione di una quantità notevole di pelo, posizionare l'animale all'aperto.
Con il bordo e i denti del dispositivo rivolti verso il mantello, passare CON DELICATEZZA lo strumento sul mantello dell'animale seguendo la direzione della crescita del pelo.
Il tempo necessario alle operazioni di rimozione del pelo con lo strumento FURminator deShedding varia a seconda della razza e delle condizioni del mantello.
In caso di perdita di pelo eccessiva, causata da problemi di salute o da una dieta errata, consultare un veterinario.
Lo strumento FURminator è progettato per la rimozione del mantello invernale.
Il bordo dello strumento FURminator, dotato di un pettine fine e ad alta precisione, deve essere protetto con l'apposito rivestimento qualora non venga utilizzato.
FURminator Inc. declina ogni responsabilità in caso di rottura dei denti del bordo dello strumento deShedding.
Lo strumento FURminator deShedding può essere utilizzato su altri animali di grandi dimensioni, quali ad esempio i bovini ed equini, ad esclusione di criniera e coda.IN OMAGGIO
Shampoo a secco per cani arricchito con Omega 3 & 6, Vitamina E, Calendula ed Aloe Vera, aiuta a sciogliere i nodi negli animali a pelo lungo per poterli spazzolare più facilmente, venduto in pratica confezione spray da 250ml.
INFORMAZIONI:
Prodotto in USA con processi a basso impatto ambientale in aziende eco certificate, non contiene paraben e suoi derivati nè conservanti o coloranti chimici.
USO:
Spruzzare generosamente sul mantello e successivamente strofinare con un panno pulito ed asciutto. Non è necessario risciacquare. Ripetere se necessario.
AVVERTENZE:
Per uso esterno su animali con più di 6 settimane di età. Evitare il contatto con gli occhi. In caso di irritazioni, sospendere il trattamento e consultare un veterinario.
INGREDIENTI:
Natural Surfactants, Water, Hydrolyzed Wheat Protein, Hydrolyzed Oat Protein, Omega 3 & 6 Fatty Acids, Cranberry Seed Oil, Kava Extract, Calendula Extract, Vitamin E, Chamomile Extract, Aloe Vera, Papaya Leaf Extract, Safflower Seed Oil, Sunflower Seed Oil, Colloidal Oatmeal3562€48.28Only 2 leftOnly 2 left -
FURminator brush for extra small size short-haired animals
Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3564€27.87Only 4 leftOnly 4 left -
FURminator brush for extra small size long-haired animals
Extra Small size - suitable for very small animals or puppies. Also ideal for rabbits and ferrets
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3564L€27.87Only 4 leftOnly 4 left -
FURminator brush for extra large size short-haired dogs - over 45Kg
Extra Large size - suitable for animals over 45 kg.
FURminator has set the standard in the category with an innovative grooming tool that reduces hair loss better than any brush, comb or rake comb.
WHAT DOES IT DO ?
It very effectively removes dead hair and fleece (undercoat) from the animal.HOW DOES IT WORK ?
Like a normal brush: in fact, all you have to do is comb the animal in the direction of the hair, without imparting force or pressure, with natural, smooth movements.BUT DOES IT CUT THE ANIMAL'S HAIR?
Absolutely not, it merely removes the dead hair already present in the coat.DOES IT RUN ON BATTERIES?
No, it is a special brush with a metal comb that catches and removes hair.CAN IT HURT THE ANIMAL?
Absolutely not, in fact, the steel comb is designed to be comfortable and not to create abrasion or discomfort during use.DOES IT REQUIRE SPECIAL MAINTENANCE?
It should be treated like a normal grooming and grooming brush, without special maintenance.FEATURES
- Reduces hair loss by up to 90 percent by removing undercoat and dead hair without damaging the cover coat.
- Optimal results on long or short-haired dogs and cats provided with undercoat.
- Stimulates the natural oils in the pet's coat for a healthy, shiny effect.
- Reduces the number of airborne particles that can induce allergic reactions.
- Helps eliminate hairballs in cats
- Does not cutTOOL INSTRUCTIONS
Since the FURminator deShedding tool causes the removal of a significant amount of hair, place the animal outdoors.
With the edge and teeth of the device facing the coat, gently pass the tool over the animal's coat following the direction of hair growth.
The time required for hair removal operations with the FURminator deShedding tool varies according to breed and coat condition.
In case of excessive hair loss caused by health problems or incorrect diet, consult a veterinarian.
The FURminator tool is designed for winter coat removal.
The edge of the FURminator tool, which is equipped with a fine, high-precision comb, should be protected with the appropriate coating if not in use.
FURminator Inc. disclaims any liability in case the teeth of the edge of the deShedding tool break.
The FURminator deShedding tool can be used on other large animals, such as cattle and equines, excluding mane and tail.3565XC€56.56Only 3 leftOnly 3 left -
Lurch - Silicone baking mat 29x40cm - Flexi Form
Tappetino da forno in silicone platinico, misura 29x40cm
E' adatto sia al microonde, al forno tradizionale ed alla lavastoviglie. Materiale morbido, flessibile, antiaderente ed indistruttibile, garantito per 15 anni. Conforme alle normative alimentari: atossico, inodore ed anallergico, non influenza i sapori e resiste agli acidi della frutta.
Questo tappetino da forno è ideale come modulo da cottura per non far bruciare e attaccare i cibi, grazie anche alla particolare struttura piramidale che consente la circolazione dell'aria.
Sostitutivo della comune carta da forno usa e getta,è lavabile e riutilizzabile. Minimo ingombro, dopo l'utilizzo infatti si può arrotolare per riporlo nel cassetto o intorno al matarello.
Ideale per cotture prive di grassi e super croccanti.4761€19.67Only 1 leftOnly 1 left -
Lurch - Mold silicone biscuits
STAMPO PER BISCOTTI CUCCHIAINO
Stampo per biscotti Flexi®Form a forma di cucchiaino.
Da ogni stampo si ricavano 8 biscotti.
Dimensioni: 15 x 30 cm.
Caratteristiche:
in silicone platinico al 100%
per alimenti,
non influenza i sapori,
resistente agli acidi della frutta,
resistente alle temperature da -40 a 240°C
massimo effetto antiaderente
15 anni di garanzia.
Lavabile in lavastoviglie.00085070€10.57Only 5 leftOnly 5 left -
Lurch - Flexiform Valentine Moulds
Lurch - Flexiform Valentine Moulds - 15 x 30 cm
Made of 100% platinum silicone
For 12 valentine's biscuits, 2 of each to stick
Made of 100 % platinum silicone: food-safe, neutral in taste, resistant to fruit acid, temperature-resistant from -40 °C to 240 °C
Maximum anti-adhesive effect
15-year warranty
Dishwasher-safe
00085072€9.02Only 2 leftOnly 2 left -
Lurch - Silicone molds for Cupcake - 6pz
STAMPI PER CUPCAKES
Stampi per cupcake Flexi®Form.
Continene 6 stampi da cupcake con 1 scavino per cupcake.
Stampi: Ø 70 mm, altezza 35 mm
Scavino: plastica, altezza 80 mm
Caratteristiche:
in silicone platinico al 100%
per alimenti,
non influenza i sapori,
resistente agli acidi della frutta,
resistente alle temperature da -40 a 240°C
massimo effetto antiaderente
15 anni di garanzia.
Lavabile in lavastoviglie.9311€11.48Only 1 leftOnly 1 left -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
Lurch - Silicone mold for 6 mini wedding cake
Descrizione: Per 6 torte mini-matrimonio, dimensione individuale ca. Ø 7.5 cm x altezza 10 centimetri Realizzato in silicone platino al 100%: resistente agli acidi della frutta, resistente alle temperature da -40 ° C a 240 ° C Adatto a persone con allergie. Tempi di cottura più brevi Effetto anti-aderente. 15 anni di garanzia Lavabile in lavastoviglie9313€23.77Only 0 leftOnly 0 leftOut of stock -
Lurch - Mini cutter cuts all
Lurch - Mini tagliatutto
Due lame per tagliare a bastoncini o a dadini. Adatto per aglio, cipolle, altre piccole verdure, frutta secca, sottaceti ecc. Eleganza e praticità per uno strumento indispensabile nelle vostre cucine.5451M€13.52Only 0 leftOnly 0 left -
Lurch - Mold Ginger Bread Man - pastry
GINGER BREAD MAN
Lurch-Stampo per biscotti Flexi®Form a forma di omino di panpepato.. Da ogni stampo si ricavano 6 biscotti. Dimensioni dello stampo: 24 x 30 cm. Dimensioni del biscotto: 9 x 11 cm Caratteristiche:
in silicone platinico al 100%
per alimenti,
non influenza i sapori,
resistente agli acidi della frutta,
resistente alle temperature da -40 a 240C
massimo effetto antiaderente
15 anni di garanzia.
Lavabile in lavastoviglie.00065014€16.39Only 0 leftOnly 0 left -
Lurch - Flexi Form Kipferl mould
Lurch - Flexi Form Kipferl mould 17x30cm brown
Everyone loves croissants Making them is easy with Flexi®Form and they come out beautifully.
baking mould for sixteen vanilla croissants
can also be used as a template (baking model) with sufficiently rigid dough
temperature-safe between -60°C and +260°C
recipe included BPA-free,
dishwasher safe
Product line FLEXI-FORM
Material Premium-Platinum-Silicone
Color brown
Dimensions 17 x 30 cm
9310€11.89Only 0 leftOnly 0 leftOut of stock
