Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of the box
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of Production: USA
Blade: stainless steel CPM-S35VN hardened by BOS
Blade finish: satin-finished
Handle: Micarta, with aluminum pommel and guard
Blade length: 152mm.
Blade thickness: 4.4mm.
Total length: 267mm.
Weight: 300g.
Scabbard: leather
Packaging: cardboard box with Buck logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new
* Commercially available: found.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The Compadre Camp Knife is the perfect ally for those who love adventure. With its 5160 steel blade and cobalt coating, it cuts with precision and stands up to any challenge. The sturdy and stylish Micarta handle provides a secure grip, making it ideal for the outdoors.

Intended Use: Bushcraft / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, made of 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 114mm.
Blade thickness: 3.8mm.
Total length: 241mm.
Weight: 199g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: previously purchased knife from private collection

The 117 Brahma Pro knife is a versatile tool designed for hunting and outdoor activities. It is often referred to as the 'mini 119 Special' because it shares the classic style of Buck's first fixed knives. The knife offers two main cutting options: the clip-shaped blade tip for precise and detailed work, and the middle part of the blade for sturdier and tougher tasks.

A notable feature of the 117 Brahma Pro is its traditional guard and pommel. These elements help ensure greater control and stability during use. In addition, the knife comes with a black genuine leather sheath that features a belt loop for convenient and accessible carrying.


Intended use: Hunting / Light Utility

Production type: Industrial
Country of manufacture: USA
Blade: BOS hardened CPM-S35VN stainless steel
Blade finish: Satin finish
Handle: Micarta, with aluminium pommel and guard
Blade length: 114mm.
Blade thickness: 3.3mm.
Total length: 222mm.
Balance: on the guard branch
Weight: 139g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

What is the best tool for splitting wood? For camping, we think the best tool is the Froe 108 Compadre. The froe is designed for clearing, heavy cutting, splitting and beating. Full tang 5160 spring steel runs the entire length of the froe, which measures 42.5 cm, giving it excellent shock-absorption capacity and increasable strength. The 24.1 cm long cutting edge is perfect for splitting, but also lends itself to detailed work. The Cerakote Cobalt coating offers increased durability and corrosion resistance. The ergonomic handle is made of natural canvas Micarta, which ensures a superior grip even in wet conditions. The Froe includes a genuine black leather sheath, made in the USA, with a stainless steel attachment ring to keep the froe at your side or secure in your backpack. The Froe 108 Compadre is the perfect tool for your camping and general outdoor needs. Made in the USA.


Intended Use: Machete / Heavy Duty

Production type: Industrial
Country of manufacture: USA
Blade: Full tang, 5160 steel at 57/58HRC hardened by BOS
Blade finish: Cobalt Cerakote
Handle: Natural Canvas Micarta
Blade length: 241mm.
Blade thickness: 5.8mm.
Total length: 425mm.
Balance: Advanced
Weight: 683g.
Sheath: Black leather
Packaging: Cardboard box with Buck logos
Notes: -

COUTEAU DE RETRAITE PROVENANT D'UNE COLLECTION PRIVÉE - Modèle Buck 120 datant des années 90
* Type : déjà acheté
* Etat : en excellent état, comme neuf
* Disponible dans le commerce : disponible dans le commerce dans les versions les plus récentes
* Affûtage : Original
* Marques sur la lame : non
* Marques sur le manche : non
* Boîte : sans boîte
* Gaine : gaine en cuir noir d'origine
* Manuels, certificats et garanties : -
* Contrôlé et certifié par notre laboratoire interne

Utilisation prévue : Tactique

Type de production : Industrielle
Production Lama : États-Unis
Lame : acier inoxydable 420HC
Traitement de la lame : -
Manche : en Polymères
Longueur de la lame : 185 mm.
Épaisseur de la lame : 4,5 mm.
Longueur fermée : -
Longueur totale : 300 mm.
Epaisse fermée : -
Équilibrage : -
Poids : 228 grammes.
Fermeture: -
Agrafe: -
Fourreau : en cuir noir
Emballage: -
Noter: -

Intended use: Tactical / Hard Utility / Survival

Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -

W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.

The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.

J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.

At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.

Intended use: sports / collection

Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Intended use: Tactical / Collective

Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Intended use: Sports / EDC

Type of production: Industrial
Production Lama USA
Blade: CPM-S30V stainless steel
Blade treatment: nitriding Titanium
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed Length: 112mm.
Overall length: 190mm.
Thick when closed: 11mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Buck logos
Notes: Hardened by Paul Bos

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

Trapper Dark Red - CA00646 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Buck - Hunt Foldover 11100 - knife

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 122mm.
Total length: 215mm.
Thick when closed: 16mm.
Balance: -
Weight: 210g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: stainless steel 420HC
Treatment Lama: -
Handle material: wood and alpaca
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 185mm.
Thick when closed: 13mm.
Balance: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: leather sheath
Packaging: cardboard box with logos Buck
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Aus-6
Treatment Lama: -
Handle material: aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 180mm.
Thick when closed: 9mm.
Balance: -
Weight: 76g.
Lock: Liner Lock
Clip: Reversible and removable steel
Sheath: -
Packaging: cardboard box with logos Buck
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPM-S30V by Bos
Treatment Blade: Stonewashed
Handle material: titanium
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Thick when closed: 10mm.
Balance: -
Weight: 76g.
Closure: Frame Lock
Clip: Reversible and removable titanium
Sheath: -
Packaging: cardboard box with logos Buck
Notes: Hardened by Paul Bos - wooden box

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 420HC
Produzione Lama: USA
Manicatura: Nylon e gomma Dynafle
Lunghezza lama: 130mm.
Spessore della lama: 6mm.
Lunghezza totale: 260mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 262g.
Chiusura: -
Clip: -
Fodero: in nylon nero compatibile con sistema M.O.L.L.E.
Confezione: scatola di cartone 
Note: 

Intended Use: Tactical

Type of production: Industrial
Country of Production: USA
Blade: 420HC stainless steel
Handle: Phenolic resin
Blade length: 145mm.
Blade thickness: 4.5mm.
Total length: 265mm.
Weight: 213g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

Destinazione d'uso: caccia/sportivo

Lama: full-tang in acciaio inox 440C teflonato
Tipo di filo convesso

Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 210g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -

Destinazione d'uso: caccia/sportivo

Lama: full-tang in acciaio inox 440C teflonato
Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 200g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello realizzato dalla ditta americana Case negli anni 90

Produttore: Case - USA
lunghezza totale aperto: 24 cm
lunghezza lama: 10,5 cm
peso: 160 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma
note: fodero nero in Nylon

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello vintage prodotto dalla ditta americana Case nel 1991

Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon

American Bowie Hunter 19USA92 - knife

Intended Use: Sport / collection / Hunting

Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system

Purpose : Hunting / Sporting

Type of production : Industrial Production

Lama : United States |

Lama : stainless steel 12C27M hardened by Paul Bos

Privacy Lama : -

Handle : Alcryn

blade length : 130mm.

blade thickness : 4mm.

length closed : - total length : 250mm.

thickness when closed : -

Balancing : -