Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Intended use: Collection / Survival

Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent condition

Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.

Intended use: Collection/Survival

Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good condition

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was responsible for the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated through bankruptcy in 1993. Production of the brand was subsequently taken over by Freidrich Olbertz in Solingen.

Survival knife produced in Germany since the 1970s.

Intended use: Collection/Survival

Type of production: industrial
Blade: ICE TEMPERED stainless steel, PVD coated
Country of production: Germany
Handle: brass coated with synthetic material, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap with o-ring
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 401g. (609G. scabbard included)
Scabbard: leather, with pocket containing a sharpening stone
Notes: original cardboard box

Translated with www.DeepL.com/Translator (free version)

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years, various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Traditional pocket knife with micarta handle - knife made in Germany in the 90s.

Intended use: Collection

Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 70mm.
Total length: 173mm.
Balancing: -
Weight: 107gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -

W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.

The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.

J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.

At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.

Intended use: sports / collection

Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Intended use: Tactical / Collective

Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

Trapper Dark Red - CA00646 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Destinazione d'uso: caccia/sportivo

Lama: full-tang in acciaio inox 440C teflonato
Tipo di filo convesso

Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 210g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -

Destinazione d'uso: caccia/sportivo

Lama: full-tang in acciaio inox 440C teflonato
Produzione Lama Italia
Manicatura: legno
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 225mm.
Bilanciatura: arretrata
Peso: 200g.
Chiusura: -
Clip: -
Fodero: in nylon
Note: -

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello realizzato dalla ditta americana Case negli anni 90

Produttore: Case - USA
lunghezza totale aperto: 24 cm
lunghezza lama: 10,5 cm
peso: 160 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma
note: fodero nero in Nylon

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello vintage prodotto dalla ditta americana Case nel 1991

Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon

American Bowie Hunter 19USA92 - knife

Intended Use: Sport / collection / Hunting

Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.