Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s

Intended Use: Hunting

Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinued 

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Robur - Light household scissors – Modern 5,5'

FOUNDED IN 1960, ROBUR IS SPECIALISED IN THE PRODUCTION OF CISSORS FOR SEVERAL USES

A broad range of high quality products with different finishing, for a variety of uses: household, haberdasher, tailor, hairdresser, electrician, kitchen scissors and knives. Additionally, tweezers, nippers, files, manicure sets and different exhibitors.

For all domestic uses.

Light and easy to handle.

The dimension depends on the hand’s size and on what needs to be cut .

NICKEL Suitable for light domestic uses Nickel.

 Blade length: 6,5 cm.

Total length: 14 cm.

Robur - Light household scissors – Modern 5'

FOUNDED IN 1960, ROBUR IS SPECIALISED IN THE PRODUCTION OF CISSORS FOR SEVERAL USES

A broad range of high quality products with different finishing, for a variety of uses: household, haberdasher, tailor, hairdresser, electrician, kitchen scissors and knives. Additionally, tweezers, nippers, files, manicure sets and different exhibitors.

For all domestic uses.

Light and easy to handle.

The dimension depends on the hand’s size and on what needs to be cut .

NICKEL Suitable for light domestic uses Nickel.

 Blade length: 6 cm.

Total length: 13 cm.

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.

The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.

J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.

At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.

Intended use: sports / collection

Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Intended use: Tactical / EDC / Collection

Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Target: Tactical / EDC / Collection

Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Intended use: Tactical / Collective

Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -

Uso: Táctico / EDC / Colección

Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

Trapper Dark Red - CA00646 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED