Last up date
-
Randall Knives - Model 25-5 - Trapper 5” in Brass, Desert Ironwood and Leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warrantyAP-RK-25-5DI-CP€1,139.34Only 1 leftOnly 1 left
-
Randall Knives - Model 26 Pathfinder Knife - Stag - PRIVATE COLLECTION - knife
The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -AP-RAND-26€613.93Only 1 leftOnly 1 left -
Randall Knives - Model 16 Diver Knife - Micarta - PRIVATE COLLECTION - knife
The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.
7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy.
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -AP-RAND-16€1,057.37Only 1 leftOnly 1 left -
CrushGrind - PARIS - Pepper Mill - Walnut Wood Finish - 29cm
The CrushGrind mechanism, the brainchild of Japanese inventor Mitsui Kamioka, revolutionized the grind market in 1994 with the introduction of a patented ceramic system.
This innovative device, guaranteed for 25 years, offers superior performance compared to competitors due to its greater capacity and versatility.- The mechanism is larger than conventional grinders, allowing it to grind more than double the amount of salt, pepper, spices or dried herbs.
- It is possible to clean the gear by grinding coarse salt adjusted to the minimum. In addition, the CrushGrind mechanism is removable and can be washed with water and detergent, ensuring thorough cleaning and long life.
- CrushGrind offers numerous models suitable for both consumers and the on-trade. The range includes grinds made from natural materials such as wood and products made from biocomposite, an environmentally sustainable material obtained by mixing wood fiber with oil derived from paper production.The name “Paris” was originally dedicated to Prince Henrik, a French cooking enthusiast and hedonist, in reference to the capital of France, with its imposing stature, combines walnut and stainless steel, adding a touch of elegance to functionality.
With the CrushGrind mechanism, you not only get a high-quality product, you also invest in a kitchen accessory that combines innovation, practicality, and style, perfect for those who want the best in their culinary environment.CGP29€53.28Only 1 leftOnly 1 left -
Randall Knives - Model 27 - Trailblazer Leather and Walnut - PRIVATE COLLECTION - knife
The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-27€897.54Only 1 leftOnly 1 left -
Randall Knives - Model 11-4.5 - Alaskan Hunter brass and walnut - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-1145€750.00Only 1 leftOnly 1 left -
CrushGrind - VAASA Mill 13CM, green - 1 PCS
CrushGrind - VAASA Mill 13CM, green - 1 PCS
Get your spices grinding! This is a clean and fresh design – allowing the spices inside of the grinder to be the star of the show.
The Vaasa grinder is an upside down grinder that won’t leave any residues on your tabletop. The adjusting wheel at the top of the grinder makes it very easy to get just the right coarseness. Add your spices or mix your own blends and experience what freshly ground spices will do for your cooking.
The Vaasa series is based on a biocomposite material made of wood based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel.
The material has a low carbon footprint, and unlike crop-based biomaterials, this bio composite doesn’t interfere with a food-production chain.
The grinders are mounted with our patented CrushGrind® mechanism. -Material Glass, Biocomposite
Color Kampot Purple
Item Dimensions LxWxH 2 x 2 x 5.25 inches.
060200-0028€17.21Only 3 leftOnly 3 left -
CrushGrind - Billund - Oil / Vinegar set 2 pieces
CrushGrind - Billund - Oil / Vinegar set 2 pieces
BILLUND THE FUN DESIGN
The Billund series features a fun and playful design inspired by the famous Danish building bricks whose production began in the city of Billund.
BILLUND OIL / VINEGAR BOWL
The colour of the glass reflects the light and the colour varies depending on the contents. -Sits well on any table or in any kitchen and is perfect for oil and vinegar.
The silicone spout is cleverly designed to pour the condiment easily and avoid unwanted drips.
The shape is designed so that excess liquid flows back into the container after use.
It is made of borosilicate glass and the lid is made of a biocomposite material from certified wood pulp from legally and sustainably managed forests.
Material: biocomposite, glass
Height: 15.5 cm
⌀: 6 cm
Designer: IDEAS / Sam Murley
CGBOA26€56.15Only 1 leftOnly 1 left -
T&G CrushGrind - Apollo Macinasale e macinape in acciaio INOX e acrilico, 15 cm
Macina sale e pepe Apollo 15 cm ,
questi macinasale e macinapepe utilizzano il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione.
Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine. T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8400€113.93Only 2 leftOnly 2 left -
CrushGrind - Billund - Grinder set 2 pieces
CrushGrind - Billund - Grinder set 2 pieces
An innovative and different mechanism CrushGrind holds the record of having incorporated the ceramic mechanism, invented by the Japanese Mitsui Kamioka, into a millstone and first introduced it to the market in 1994.
The mechanism, patented and guaranteed for 25 years, is larger than those found on the market, which allows for more than double the amount of salt, pepper, spices or dried herbs ground than the competition.
Because of its shape, all types of salt, pepper, spices and dried herbs can be ground indiscriminately.
Furthermore, it is easy to clean: when switching from one spice to another, the gear can be cleaned by grinding coarse salt, adjusting the grinder to the minimum. In addition, unlike all other grinders, the CrushGrind is detachable, so it can be easily cleaned with water and detergent, taking care to let it dry thoroughly.
Many models for every need The CrushGrind grinder offer includes numerous models, intended for consumers or the on-trade. In addition to models made of natural materials, such as wood, the company also offers products made entirely or partly of biocomposite material, obtained by mixing wood fibre with oil from paper production.
Such as the Billund model, not by chance named after the Danish city, home of Lego, whose shape is reminiscent of coloured bricks, available in various colours.
The Billund grinder is an upside-down grinder that leaves no residue on the table.
It has a silicone cap on the bottom that makes it easy to fill with the spices or blends you like to use.
The Billund series is a fun and playful design, inspired by the colourful building blocks of Denmark.
It is based on a bio-composite material consisting of wood-based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel. In addition, the material has a low carbon footprint and, unlike crop-based biomaterials, this biocomposite does not interfere with the food production chain.
Material: biocomposite
Height: 12 cm
⌀: 6 cm
Project by IDEAS / Sam Murley.
CG2BIL12€48.36Only 1 leftOnly 1 left -
Randall Knives - Model 25-5 - Trapper 5” brass, deer and leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like newAP-RK-25-5CE-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 7 - Fisherman Hunter Deer - PRIVATE COLLECTION - knife
This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting/fishingType of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-7FHC€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 11-5 - Alaskan Skinner - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-115L€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 19-4 - Bushmate Stag Horn - PRIVATE COLLECTION - knife
This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-194SH€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Modelo 1-7" - Micarta Finger Grooves - COLECCION PRIVADA - cuchillo de coleccionista
CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio internoEl Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.
Uso previsto: táctico / militar
Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privadaAP-RK-1-7MFG€0.00Only 0 leftOnly 0 leftOut of stock -
Case Cutlery - Stockman 3 blades Folding Knife - 2801 - knife
W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.
The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.
J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.
At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.
Intended use: sports / collection
Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -CA-2801€64.75
Out of stock -
Case Cutlery - Trapper Yellow - CA00161 - Knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -CA00161€61.47Out of stock -
Case Cutlery - Trapper Nacre 00640 - knife
Trapper Nacre 00640 - knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -CA260€81.15Out of stock -
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife
Mini Trapper Santa Fe 'Turquoise - craft knife
Intended Use: sports / collection
Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -05142€63.93Out of stock -
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife
Mini Trapper Santa Fe 'Turquoise - craft knife
Intended Use: sports / collection
Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -case-mtt€122.95Out of stock -
Case Cutlery - Trapper Nacre 00640 - knife
Trapper Nacre 00640 - knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -00640€135.24Out of stock -
Case Cutlery - Trapper John Deere Green - 05862 knife
Case Cutlery - Trapper John Deere Green - 05862 knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -05862€61.47Out of stock -
Case Cutlery - Trapper Dark Red - CA00646 knife
Trapper Dark Red - CA00646 knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -00646€61.47Out of stock -
T&G CrushGrind - Stoccolma Macinasale e macinape in acciaio INOX e acrilico, 19 cm
Macinasale e pepe Stoccolma 19 cm.
Questi macinasale e macinapepe utilizzano
il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione. Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine.
T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8401€113.93Only 0 leftOnly 0 leftOut of stock -
Case - BlackHorn Nero - coltello
W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.
Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.
J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.
All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA. Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis.
Coltello realizzato dalla ditta americana Case negli anni 90
Produttore: Case - USA
lunghezza totale aperto: 24 cm
lunghezza lama: 10,5 cm
peso: 160 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma
note: fodero nero in Nylon7118€77.87Out of stock -
Case - BlackHorn Verde - coltello
W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.
Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.
J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.
All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA. Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis.
Coltello vintage prodotto dalla ditta americana Case nel 1991
Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon7119€65.57Out of stock -
Case - American Bowie Hunter 19USA92 - knife
American Bowie Hunter 19USA92 - knife
Intended Use: Sport / collection / Hunting
Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case7197€254.10Out of stock
