Last up date
-
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
Ravi - Wine Iceberg - Freshers
Wine Iceberg
- EFFICACE
Il raffreddatore Wine Iceberg mantiene il vostro vino freddo al pari di un secchiello con ghiaccio.
- PULITO
La vostra tavola rimane pulita e asciutta. Nessun bisogno di cubetti di ghiaccio, nessun disordine,nessuna macchia!
- COMPATTO
Occupa poco spazio sulla tavola e nell'armadietto in cucina.
-PRATICO
Glacette refrigerante removibile, da conservare in congelatore.
- POLIVALENTE
Adatto alla maggior parte delle bottiglie di Champagne e di vino.6228Special Price €16.39 Regular Price €20.49Only 1 leftOnly 1 left
-
Nilte - Quiete - White Mirror Wash - 20pcs Limited Edition - knife
COMFORTABLE TO WEAR !
The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.
PLEASURE OF USE
The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.
HIGH LIGHT
The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .
SCREW ANTI-SLIP
In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .
THE HOLE WITH WINGS WINGS PIVOT HOLE
This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .
CURVE LIFESAVER !
Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .
SAFETY FIRST !
The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .
THE NAME
The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.
Intended Use : Sport / EDC
Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 20 copies7287WSpecial Price €229.51 Regular Price €262.30Only 1 leftOnly 1 left -
Ravi - The bucket pocket
Ravi - The bucket pocket Il secchiello per il ghiaccio in plastica modellabile, portatile e pieghevole.
Basta passare il secchiello sotto l' acqua calda per ammorbidirlo e modellarlo a piacere. Lo si riempe quindi di acqua fredda e ghiaccio per renderlo nuovamente rigido con la forma desiderata.
Il fondo del secchiello ha una pellicola colorata che dona all'acqua bellissimi riflessi colorati che regalano un pizzico do colore e divertimento alla tavola.
Colori assortiti: champagne, blu.6231Special Price €5.05 Regular Price €7.21Only 6 leftOnly 6 left -
Piexon - Guardian Angel III - irritating liquid for Personal Defense
*** ATTENTION: PAYMENT FOR THIS ITEM CANNOT BE MADE WITH PAYPAL ***
Made in Switzerland - capsium spray (chilli pepper) for free sale and free port, as per Decree of the Ministry of the Interior N ° 103 of 12/05/11 - G.U. N ° 157 of 8/7/11 in force since 9/1/12
Forbidden to children under 16
In life, the more reactive you are, the more likely you are to escape danger. MiDifendo GA3 is the evolution of its species: an improved pepper spray gun with anatomical grip and precision sight.
Pull the trigger and reach the threat with a quick, powerful shot that blocks them for 1 hour, giving you time to escape or call for help. Now that you know MiDifendo GA3 you can no longer entrust your safety to the common pepper sprays on the market.
Double charge of OC-based PIEXOL Gel (cayenne pepper)
The GA3 magazine holds 2 chilli rounds. Each of them contains about 6 grams of a very dense blend of Oleoresin Capsicum of the Piexon formulation, called PIEXOL. OC (Oleoresin Capsicum) is an extract of cayenne pepper which in the patented PIEXOL blend has a stinging capacity measured in 400 thousand SHU units on the Scoville scale, one of the most powerful on the market today.
The effects and symptoms
In addition to the strong impact, the attacker is impressed with a red halo that allows for eventual recognition in case of escape by the police.
The PIEXOL® liquid gel penetrates the mucous membranes and nothing can stop it, not even glasses, masks or tissues. In a few moments the attacker is immobilized for about 45-60 minutes with symptoms such as burning in the eyes, nose, mouth and skin, spontaneous closing of the eyes and inability to see temporal with strong tearing, difficulty breathing with cough, severe burning general. The effects and symptoms, although important, so as to completely inhibit the aggressor from possible actions and threats, do not leave permanent damage.
Main features:2 shots included with range 3 m at 180 km / h
light and compact: 12 x 8cm, weighs 100g
precision viewfinder
ambidextrousA compact and lightweight pepper spray gun for self-defense, which fits in your hand because it is gun-shaped, but is also so small that you can hide it in your pocket or purse. In 12 cm there is all the power of a super irritating pepper jet that knocks out anyone for a whole hour.
TECHNICAL SPECIFICATIONS
- Measurements (W x H x D): 110 x 70 x 23 mm
- Weight: 120 g
- Maximum range: 3 m
- Minimum shooting distance: 50 cm
- Operation: trigger operated drum ignition, automatic charge change
- Magazine content: 2 charges with a volume of 6 ml each
- Irritant, non-flammable agent: 10% OC (capsicum) with a maximum capsaicin concentration of 1.4%
- Output speed: 50m / s - 180km / h
- Rechargeable: NO
- Trigger resistance: 3 kg
- Shock resistant: guaranteed up to a height of 1.5m
- Water resistance: YES
- Operating temperature: -20 ° C / + 80 ° C
- Material: Translucent black plastic
- Warranty: 3 years8200-0099_059€53.28Only 0 leftOnly 0 left
-
Mac Coltellerie - San Marco Fighting Knife D2 - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-D2€143.44Only 0 leftOnly 0 left
Out of stock -
Piexon - Guardian Angel II - OC Pepper Spray
Made in Switzerland - pepper spray of free sale and a free port, as per Decree of the Ministry of Interior No. 103 of 12/05/11 - OJ # 157 of 8/7/11 in force since 09.01.12
Guardian Angel II is an evolution of the previous model , improved in particular with regard to ergonomics and modified based on the observations of many users in a manner which now resembles that of a gun pocket , in order to make more comfortable and instinctive handling and use , such as a gun, also , now the Guardian Angel II is equipped with a line of sight with " notches " that still allow you to frame the target to make more accurate shots .
Made entirely of plastic, constructed from two half-shells of translucent coloregrigioblu , with a trigger activator in red plastic that according to law , and for added safety and convenience as well as according to international approvals obtained, it is protected through accidental dallattivazione a spacer made of white plastic that acts as a block that is safe and easily removed from the movement of the index finger of the strong hand when it is to operate inside the trigger guard itself.
The trigger of the Guardian Angel II has a weight of 3 kg , in turn unulteriore security measure . At each pressure corresponds lemissione dellintero content of one of two cylinders placed in the half-shells by way of rods juxtaposed , in turn made of plastic and each containing 6 ml of a mixture of Oleoresin Capsicum , gelling agent and red dye . The compound thus attaches to skin and clothes dellaggressore hit , prolonging its irritant action , and stall must be washed away , making its action three times more effective than that of a common spray ; the dye also " brand " ( in a manner not indelible , according to the law ) subject to a possible later identification by the forces of the Order .
The Guardian Angel II is a disposable system : there are refills , given its construction completely plastic (which incidentally makes it particularly resistant to impact and keeps the weight by almost imperceptible levels , just 120 g ) stall must be used once and thrown away . This however, is apparently the only drawback in a device of small dimensions ( 120x85x25mm the total space ) , with a propulsion system that is able to develop a ballistic jet with a range of 3 meters traveling at 50 m / s (180 km / h ) , and thus makes it possible to hit a violent attacker closing fast with efficiency and precision. The lack of spray propellant classic , replaced by a small charge of compressed air , free Guardian Angel II from the drawbacks typical of " cans " , in particular with regard to the functionality in some circumstances ( the Guardian Angel II run at any temperature between -20 and +80 ° C ) and accidental loss of pressure . Its active mixture is also certified as effective both on people and animals , and is able to act effectively even on subjects while impaired by alcohol or drugs ; jet ballistic that replaces the classic and the spray pistol shape in place of the classical configuration canister also avoid that the user , in situations of stress or downwind , they will commit errors that may lead him to be hit by the effects of the OC as , or more , of his assailant .
• Simple to use, just point and shoot
• speed of 4 m in 1 /10 second
• The attacker is immobilized
• You can shoot from any angle, with both left and right handed
• Can operate in any weather
• Overall height of about 12 cmpiexon-jpx€204.10Out of stock -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Mac Coltellerie - Survival knife XJ24 - knife
Intended use: outdoor / survival
Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:XJ24€65.57Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
Azero - Machete Micarta - 204221 - knife
Use: Heavy Utility / Hiking
Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle: Canvas Micarta
Blade length: 160mm.
Blade Thickness: 5mm.
Overall length: 280mm.
Balance: the branch guard
Weight: 360g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero SpainAZ204221€65.57
Out of stock -
Azero - Hunting Teak - 210091 - knife
Intended Use: Hiking / Hunting
Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle material: teak wood
Blade length: 90mm.
Blade Thickness: 5mm.
Overall length: 203mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 180g ..
Sheath: Brown leather with built-in sharpener
Packaging: cardboard box with logos Azero SpainAZ210091€53.28Out of stock -
Azero - D2 Cocobolo - 214022 - knife
Intended Use: hiking / hunting
Type of production: industry
Blade: full tang, steel D2 58 / 60HRC
Treatment Blade: satin
Production Lama: spain
Handle: cocobolo wood
Blade length: 100mm.
Blade Thickness: 5mm.
Overall length: 225mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 260g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero SpainAZ214022€102.46Out of stock -
Ravi - Refreshers for white wine , rose wine and spirits - NEW '
Ravi è un’idea innovativa in quanto rinfresca il vino nel momento stesso in cui viene servito.
Infatti non è la bottiglia che viene rinfrescata ma soltanto il vino.Il processo di rinfrescamento ha inizio quando il vino passa all’interno del Ravi.
In 10 secondi Ravi porterà un vino bianco, rosè dalla temperatura ambiente (22°-25°) alla temperatura perfetta per essere servito (8°-12°). Nessun bisogno di rafreddare un ottimo liquore con ghiaccio! Ravi raffredda whisky, scotch, gin, tequila, vodka, rum e altro.
Fatto d’inox 304, lo stesso materiale di cui sono fatte le vasche vinicole di fermentazione, il condotto interno del Ravi permette di mantenere intatte le caratteristiche del vino senza mai alterarne il gusto.
Disegnato dal famoso designer canadese Michel Dallaire, Ravi si presenta come un oggetto ergonomico e di facile utilizzo.Una volta posto sul collo della bottiglia, siccome non tutti i vini vengono bevuti alla stessa temperatura, Ravi possiede una valvola che permette, al momento, di regolare il flusso di vino in uscita potendo quindi regolarne anche la temperatura.
Ravi è composto da due parti. La parte superiore viene conservata nel congelatore mentre la base può essere conservata insieme alle posate.Il processo rivoluzionari di Ravi Vi permetterà di portare il vino alla temperatura ideale di servizio istantaneamente e resterà efficacie per più di due ore una volta tirato fuori dal congelatore.Ravi deve essere lasciato nel congelatore per almeno 6 ore prima del suo utilizzo.
Una volta tirato fuori, assemblare le due parti che compongono Ravi, metterlo sul collo della bottiglia e ostruendo la valvola dell’aria inclinare la bottiglia. Una volta in posizione di servizio liberare la valvola dell’aria togliendo il pollice. Per effettuare il primo servizio lasciare fuoriuscire il vino senza rallentarne l’uscita; per servire il secondo bicchiere potete leggermente rallentare il flusso di vino in uscita ostruendo parzialmente la valvola dell’aria con il pollice;per il terzo bicchiere rallentare il flusso un po’ di più e così avanti per gli altri bicchieri.
L’utilizzo di Ravi per servire molti bicchieri porterà un aumento della temperatura interna del condotto, il tutto dovuto al continuo passaggio del vino al suo interno. Ecco perché è importante regolare la velocità del flusso di vino in uscita che Vi permetterà quindi di assicurare un sufficiente abbassamento di temperatura.
Ravi è concepito per poter rinfrescare una bottiglia di vino completa per circa due ore.
Ravi è il dispositivo di refrigerazione per vino più piccolo sul mercato: facile da trasportare in una borsa termica per pic-nic .
Ravi è molto utile per i vini bianchi,rosati e liquori. Potete facilmente rinfrescare una bottiglia che è rimasta a lungo sulla tavola senza più bisogno di dover utilizzare l’ingombrante secchio con il ghiaccio o di dover continuamente alzarvi durante la cena per portare il vino in frigorifero.
Inserite semplicemente Ravi sul collo della bottiglia e degustate il Vostro vino alla giusta temperatura fino all’ultima goccia.
La confezione include:
- rinfrescatore6232W€36.48Only 0 leftOnly 0 leftOut of stock -
Mac Coltellerie - Tekno Daga 2 - diving knife
Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachmentTKN10D-2N€38.52Only 0 leftOnly 0 leftOut of stock -
Nilte - Quiete - Black Stone Wash - knife
COMFORTABLE TO WEAR !
The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.
PLEASURE OF USE
The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.
HIGH LIGHT
The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .
SCREW ANTI-SLIP
In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .
THE HOLE WITH WINGS WINGS PIVOT HOLE
This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .
CURVE LIFESAVER !
Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .
SAFETY FIRST !
The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .
THE NAME
The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.
Intended Use : Sport / EDC
Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 63 copies7287B€0.00Only 0 leftOnly 0 leftOut of stock -
Mac Knives - Sub Tekno Titanium - knife
Mac Knives - Sub Tekno Titanium - knife
Intended use: Underwater
Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:2310T€75.41Out of stock -
Mac Coltellerie - San Marco Fighting Knife RWL Limited Edition - knife
Intended use: Military / Tactical / Collection
Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco BellaniMAC-SM-RW€254.10Only 0 leftOnly 0 leftOut of stock -
Mac Coltellerie - San Marco Fighting Training Knife - training knife
Intended use: training knife with rounded edge and tip
Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco BellaniMAC-SM-TR€86.07Only 0 leftOnly 0 leftOut of stock -
Avatar - Collana di Jake - NN8855 - prodotto ufficiale
Jake Sully (interpretato dall'attore Sam Worthington) é l'umano protagonista del film Avatar, diretto da James Cameron. Jake è un ex Marine rimasto paralizzato dalla vita in giù a causa delle ferite riportate in un combattimento sulla Terra, durante una guerra di cui non capiva nemmeno il perchè. Suo fratello gemello rimane ucciso in un incidente e - per vie della loro compatibilità genetica - a Jake viene proposto di partecipare al misterioso programma Avatar al suo posto. Per farlo dovrà però recarsi su Pandora: un lontano pianeta, dall'atmosfera letale per gli esseri umani ma ricchissimo di vita e risorse, che attirano l'attenzione di persone con pochi scrupoli. Un ambiente lussureggiante, con grandi foreste pluviali ed oceani, pieno di incredibili esseri viventi, alcuni dalla bellezza ipnotica e altri molto, molto terrificanti. Sarà l'inizio di un'incredibile avventura...
Collana ufficiale di Jake tratta dal film AvatarNN8855€55.74Only -1 leftOnly -1 left
Out of stock -
Avatar - Bracciale Na'vi di Jake - NN8869 - abbigliamento
Jake Sully (interpretato dall'attore Sam Worthington) é l'umano protagonista del film Avatar, diretto da James Cameron. Jake è un ex Marine rimasto paralizzato dalla vita in giù a causa delle ferite riportate in un combattimento sulla Terra, durante una guerra di cui non capiva nemmeno il perchè. Suo fratello gemello rimane ucciso in un incidente e - per vie della loro compatibilità genetica - a Jake viene proposto di partecipare al misterioso programma Avatar al suo posto. Per farlo dovrà però recarsi su Pandora: un lontano pianeta, dall'atmosfera letale per gli esseri umani ma ricchissimo di vita e risorse, che attirano l'attenzione di persone con pochi scrupoli. Un ambiente lussureggiante, con grandi foreste pluviali ed oceani, pieno di incredibili esseri viventi, alcuni dalla bellezza ipnotica e altri molto, molto terrificanti. Sarà l'inizio di un'incredibile avventura...
Bracciale ufficiale di Jake tratto dal film Avatar8637€36.89Out of stock -
Avatar - Collana Na'vi di Jake - NN8831 - prodotto ufficiale
Jake Sully (interpretato dall'attore Sam Worthington) é l'umano protagonista del film Avatar, diretto da James Cameron. Jake è un ex Marine rimasto paralizzato dalla vita in giù a causa delle ferite riportate in un combattimento sulla Terra, durante una guerra di cui non capiva nemmeno il perchè. Suo fratello gemello rimane ucciso in un incidente e - per vie della loro compatibilità genetica - a Jake viene proposto di partecipare al misterioso programma Avatar al suo posto. Per farlo dovrà però recarsi su Pandora: un lontano pianeta, dall'atmosfera letale per gli esseri umani ma ricchissimo di vita e risorse, che attirano l'attenzione di persone con pochi scrupoli. Un ambiente lussureggiante, con grandi foreste pluviali ed oceani, pieno di incredibili esseri viventi, alcuni dalla bellezza ipnotica e altri molto, molto terrificanti. Sarà l'inizio di un'incredibile avventura...
Collana ufficiale di Jake tratta dal film AvatarNN8831€55.74Only 0 leftOnly 0 leftOut of stock
