Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Elegant, stable wooden block, perfect for the worktop, with 5 high-quality knives:

Paring knife 9 cm: for peeling and cutting vegetables and fruit

Serrated paring knife 12 cm: for cutting tomatoes, peppers and kiwis 

All-purpose knife 15 cm: for different cuts of small foodstuffs 

Carving knife 20 cm: the most versatile knife in the kitchen for slicing, carving and chopping 

Bread knife 20 cm: thanks to its serrated blade, it allows you to cut bread, flour and pastries.

The knife block also includes a detachable 20.5 cm kitchen scissors.

In the wooden block there is a handy knife sharpener, always available to sharpen the edge of the blade of your knives, which will then always be ready to slice everything. The knife sharpener is not suitable for the bread knife with serrated blade.

SCANPAN Maitre D' is an elegant series of miniature copper saucepans that combines modern design with classic French elegance.

Copper provides a quick and even heat distribution, and the series is manufactured with an internal stainless steel for optimum cleaning.

SCANPAN Maitre D 'pots have stainless steel handles that are attached with rivets and therefore remain cold longer.

The small portion pots are useful for delicate dishes, sauces, melted butter or chocolate to name a few - or use it directly on the table for serving meals.

Timeless and stylish design

For cooking, baking and serving

Efficient multi-layer construction

Aluminium core for excellent heat distribution 18/10 stainless steel inside for maximum durability

The copper exterior and steel handle give an exclusive look

ScanPan - Mini Paella Pan - Maitre D' 16cm

The copper miniature paella pan features a polished copper exterior and 18/10 stainless-steel interior for rapid, uniform heating.

Can be used to cook on your hob or oven and looks cool placed direct on the table.

Let your dinner imagination run wild.

Size :16cm

Height :5.3 cm

Base diameter :10.4 cm

Weight: 0.44 kg

Ovenproof up to : 260°C.

The Stunning Copper and Stainless Steel Collection SCANPAN's Maitre D' series is a beautiful assortment of copper and stainless steel that combines French elegance with timeless design.

The multi-layer construction of Maitre D' guarantees a quick and even heat distribution, and excellent temperature control - whether sautéing vegetables, melting chocolate or making sauces.

Dimension: Top

Diameter: 14cm

Base Diameter: 11.8cm

Capacity 900ml

Outside mirror polished high quality copper Inside mirror polished 18/10 stainless steel for maximum durability

Rapid heat distribution

Cast stainless steel handles - stays cool longer.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Use: Heavy Utility / Hiking

Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle: Canvas Micarta
Blade length: 160mm.
Blade Thickness: 5mm.
Overall length: 280mm.
Balance: the branch guard
Weight: 360g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero Spain

Intended Use: Hiking / Hunting

Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle material: teak wood
Blade length: 90mm.
Blade Thickness: 5mm.
Overall length: 203mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 180g ..
Sheath: Brown leather with built-in sharpener
Packaging: cardboard box with logos Azero Spain

Intended Use: hiking / hunting

Type of production: industry
Blade: full tang, steel D2 58 / 60HRC
Treatment Blade: satin
Production Lama: spain
Handle: cocobolo wood
Blade length: 100mm.
Blade Thickness: 5mm.
Overall length: 225mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 260g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero Spain

COMFORTABLE TO WEAR !

The features of this knife are pure pocket . For this reason, QUIET been designed without clip and button opener blade. The rounded lines , the size and weight extremely low compate add pleasure to the port.

PLEASURE OF USE

The introduction of PBL on QUIET gave him the opportunity to balance its proportions . The handle for 3 fingers and finger grooves give the grip strength . The new type of tooth wave , the edge with the outer radius and inner bevel , however , guarantee the accuracy Stillness of Use natural . Taken together, these features give the QUIETE a high ease of use.

HIGH LIGHT

The center of gravity of the knife is amazingly located in the area of the heart , central to the usual closable on the market . The amazing fact is that the handle with the PBL system weighs as much as the thin blade from 3mm filled with grinding . The straordinara lightness and solidity of QUIETE will give you an unforgettable experience .

SCREW ANTI-SLIP

In case you have the need to support the QUIET on the lives of the fulcrum , its design is great for a comfortable grip and non-slip . The increased size also deliver impressive structural stability to the knife . The focus of the screws and the whole industry are made with high-precision lathes with specific designs , in order to avoid games in the mechanism .

THE HOLE WITH WINGS WINGS PIVOT HOLE

This hole is introduced into the fulcrum knife nilte gives big advantages to the fluidity of movement of the blade. In fact, the seats are designed to be filled with lubricant in order to reduce the friction between the blade pivot and washers for smooth running at the highest levels .

CURVE LIFESAVER !

Nilte has introduced a new way of thinking about the pocket knife . The main concept is developed from which the design was the blade. The pocket knife would be useful in any occasion, for this reason, has been designed to QUIETE a blade sheepfoot . The main characteristic of this blade is in the fact of not having a sharp tip , but a curve that reaches the wire to decrease the risk of offending persons or damage objects accidentally .

SAFETY FIRST !

The closure of the knife with one hand is not always safe . At nilte has been studied a simple but effective solution , which is not imposed on the line and the functionality of the knife. As you can see , the blade has a ledge in the area prior to the wire , called the kick . This has the function , with the help of more advanced finger on the handle , to slow its closing stroke .

THE NAME

The first project was called QUIET nilte to all the features mentioned above . A knife that does not want to be aggressive , but quiet and useful for a use not extremely heavy, always a pleasure to take in your pocket , ready to help you live your experience in the best possible way.

Intended Use : Sport / EDC

Type of production : Industrial
Production Blade: Italy
Blade: Sandvik 14C28N stainless steel
Treatment Blade: Stone Wash
Handle: G10
Blade length : 64mm .
Blade thickness : 3mm .
Closed Length : 103mm .
Overall length: 178mm .
Thick when closed: 12mm .
Balancing : the pin opening
Weight: 60g .
Closure: Pure Back Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Nilte , paracord , warranty
Notes: First Production Run built in only 63 copies