Last up date

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Dual Tone: satin finishing and Black DLC
Handle: Titanium anodized and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 119mm.
Total length: 209mm.
Thick when closed: 14mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel with Black DLC treatment, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT opening system on ball bearings with engagement by Carson Flipper system

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with Black Tungsten DLC finish
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

The new Zero Tolerance 0609 is a smaller, even more carry-ready version of the original Factory Custom 0606CF from ZT, RJ Martin, and Matt Martin. Like the original, it offers a clean, streamlined look yet also has highly detailed handle machining that adds both grip and visual impact. For even more visual “wow,” the 3D-machined handle is built of light-yet-strong titanium that ZT has anodized in an attractive bronze.

The 3.4-inch blade is CPM 20CV, which provides enhanced toughness and resistance to edge chipping. It also delivers superior hardness, corrosion resistance, and excellent edge retention. The drop-point blade has a two-tone finish: machined satin on the grinds with a stonewashed finish on the flats. The new 0609 opens manually with ZT’s KVT ball-bearing opening system and the handy flipper so it’s always ready when you want it.

Last—but certainly not least—you’ll notice the oversized See-Through Pivot (STP). Designed by RJ Martin, this unique, pivot is hollow in the center, letting you “see through” it. The See-Through Pivot adds another intriguing touch to this already-attractive knife.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Gray
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

Intended Use: Tactical/Military

Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper System

Purpose: Sportsman / Collectibles

Type of production: Industrial
Country of production: U.S.A.
Blade: Stainless steel CPM S35VN 60 / 61HRC
Blade Treatment: Stonewash
Manicure: Titanium
Blade Length: 89mm.
Blade thickness: 4mm.
Closed length: 96mm.
Total length: 119mm.
Closed thickness: 13mm.
Weight: 155g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings

Purpose: Sportsman / Collectibles

Type of production: Industrial
Blade Production: U.S.A.
Blade: Stainless steel CPM 20CV
Blade Treatment: Blackwash
Manicure: Titanium with anodized spacers
Blade Length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Overall length: 193mm.
Closed thickness: 14mm.
Weight: 176g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Purpose: Sportsman / Collectibles

Type of production: Industrial
Blade Production: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade Treatment: -
Manicure: Titanium and G10 Black
Blade Length: 82mm.
Blade thickness: 3mm.
Closed length: 111mm.
Overall length: 187mm.
Closure thickness: -
Balance: -
Weight: 72g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT Opening on Ball Bearings - Limited Edition

Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.

Use: Collection / Sports

Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper

Intended use: sports / tactical

Type of production: Industrial
Production Country: USA
Blade: In-CPM S90V stainless steel
Blade Treatment: matt black DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3 mm.
Closed Length: 123mm.
Overall length: 213mm.
Thickness when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run in 2017 in a limited edition - Opening KVT on ball bearings - Opening Carson Flipper System

Intended use: tactical / sports

Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel 59/61HRC
Blade finish: dual tone - stonewashed and satin
Handles: rose bronze titanium and black G10
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: 2017 Sprint Run Edition - Design by Dmitry Sinkevich - Opening on KVT ball-bearing system

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: Stonewash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 127mm.
Overall length: 222mm.
Thick when closed: -
Weight: 141g.
Closing: Framelock
Clip: Removable, reversible, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Gustavo T. Cecchini GTC Knives - Opening KVT on ball bearings - Opening system SLT Spring Loaded Tab

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-20 CV
Blade treatment: Stonewash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 130mm.
Overall length: 229mm.
Thick when closed: -
Weight: 153g.
Closing: Framelock
Clip: Removable, reversible, anodized titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Les George - Opening KVT on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-20CV
Blade treatment: stonewashed - satin
Handle: Carbon fiber with aluminum spacers
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Overall length: 221mm.
Thick when closed: -
Weight: 122g.
Closing: Sub Framelock hardened steel
Clip: Removable, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Sinkevich & Rexford

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Carbon fiber and titanium
Blade length: 83mm.
Blade thickness: 3mm.
Closed Length: 112mm.
Overall length: 191mm.
Thick when closed: -
Weight: 65g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings - Opening system Carson Flipper

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel M390
Blade treatment: Black DLC
Handle: Titanium blue anodized and Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Closed Length: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings - opening via Carson Flipper system

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 Orange
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening of ball bearings Ball Bearing System KVT - opening via Carson Flipper system

The Zero Tolerance 0808BLU, with blue-anodized handle, is a sprint run built in a limited quantity.

The 0808 is a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. It features advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system. The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808GLD’s blade is paired with chamfered titanium handles that provide a solid, comfortable grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed.

This blue-anodized edition of the 0808, the 0808BLU, is a sprint run. Quantities are limited. Check with your local ZT dealer for availability.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium blu
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing - Sprint Run Limited Edition

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, and custom parts made specifically by Hinderer in his workshop. Specifically, the entire titanium screws, spacers, clips, cover-clips and all the parties in purple coloration are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial handcrafted pieces
Production Lama USA
Blade: stainless steel M390
Blade treatment: matt black DLC
Handle: Titanium with matte black DLC finish - screws and spacers purple anodized titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Weight: 159g.
Lock: Frame Lock
Clip: Removable, Multiposition, anodized titanium
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper - Curiosity: the warranty certificate is erroneously reported the CTS-204P steel; the company then decided instead to produce the knife using a stainless steel M390

Intended use: Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Weight: 124g.
Closing: framelock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - Design by Les George - Opening KVT on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: DLC Coating
Handle: G10 Orange and Titanium DLC Coating
Blade length: 91mm.
Blade thickness: 3.6mm.
Closed Length: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Weight: 178g.
Lock: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - in collaboration with Emerson Knives - patented opening system Wave

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel M390 60/61HRC
Blade treatment: Stonewash
Handle: Bronze Anodized Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 155g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium Anodized gray with black trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 123mm.
Overall length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: stonewashed
Handle: G10 on stainless steel folders
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 215mm.
Thick when closed: 14mm.
Weight: 198g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Les George - Opening KVT on ball bearings

The smell of freshly ground coffee beans - simply wonderful!

The fragrance of freshly ground coffee beans – simply wonderful! And the invigorating specialities that confident coffee aficionados make out of them are even more delicious... AdHoc developed the MRS. BEAN coffee grinder so that grinding your favourite varieties is effortless. It works manually using an energy-efficient crank handle but otherwise has nothing to do with great-grandma’s old-fashioned hand grinder with its totally modern and very stylish look in elegant stainless steel and acrylic design. MRS. BEAN is equipped with a high-performance CeraCutXL® grinder that preserves the flavour and produces large amounts. With the help of the six PRECISE+® grinding settings on the outside, results can be achieved from powder fine to coarse according to your preference and depending on which preparation method you are going to use. The grinder container holds approx. 50 grams of coffee beans. The collection container is designed for approx. 25 grams (on setting 2) of coffee powder and can easily removed by unscrewing. As a result, you can enjoy technical features with MRS. BEAN that makes grinding coffee beans a real pleasure.

And the invigorating specialties that convinced coffee lovers prepare from them are even more delicious...

Adhoc has developed the MRS BEAN coffee grinder

so that grinding your favorite varieties is easy.

It works manually using an energy-saving hand crank, but is otherwise nothing like great-grandma's old hand mill, but with its sleek design of stainless steel and acacia wood it is thoroughly modern and very stylish. Ms. BEAN features the CeraCutXL ® high-performance coffee grinder for aroma-preserving grinding and high yield. With the help of the 6-fold PRECISE+ ® external grinding degree setting, results can be achieved at will, from powdery to coarse, depending on your preferred brewing method.

Filling is done by simply pulling out the grinding crank.

The grounds container holds about 50 grams of coffee beans.

After grinding, fresh ground coffee falls into the grounds container, which is designed for about 25 grams of ground coffee (with a grind of 2).

This amount is sufficient for up to 4 cups of coffee.

The collection container is easily removable; it is unscrewed by simply rotating it.

Approximate dimensions: diameter - 6 cm,

diameter with handle:14.6 cm,

height:21.8 cm.

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 213mm.
Weight: 177g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso - Opening KVT on ball bearings

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

Intended use: EDC / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Penna tattica con corpo in alluminio anodizzato 6061 T-6 aeronautico in colore "terra marrone". Tappo a pressione con clip integrata, punta sfondavetri di emergenza ai carburi di tungsteno nella parte inferiore del fusto.

Peso di 36.9g, Lunghezza di 135cm. e diametro di 1.5cm.

Inchiostro blu con refill a tecnologia Rite in the Rain®: scrive a temperature da -35° a oltre 120°, sott’acqua, su superfici sporche e oleose, dura 15 volte in più rispetto ad un normale refill non pressurizzato, può tracciare un riga continua di 14 km grazie al particolare inchiostro tixotropico, dalla consistenza semisolida che viene resa fluida dalla speciale sfera in tungsteno.

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Sport / Collection

Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearing

Utilisation prévue: Sport / Collection

Type de production: industriel
Pays de production: États-Unis
Lame: Acier inoxydable Elmax 59 / 61HRC
Lame de traitement: Stonewash
Poignée: Titane
Longueur de la lame: 89mm.
Épaisseur de lame: 4mm.
Longueur fermée: 96mm.
Longueur totale: 119mm.
Épais lorsqu'il est fermé: 13mm.
Poids: 165g.
Fermeture: Frame Lock
Clip: amovible, multi-positions, en acier inoxydable
Conditionnement: boîte en carton avec des logos Zero Tolerance
Notes: Design by Todd Rexford - Ouverture KVT roulement à billes

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel S35VN
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance and Rick Hinderer teamed up to build the new 0562 with its exclusive Hinderer "slicer" grind.

The ELMAX® powdered steel blade with flat-ground “slicer” grind provides both slicing efficiency and a tough point. ELMAX is a third-generation powdered steel with virtually no nonmetallic inclusions. This means it offers an extremely uniform distribution of carbides for high wear and corrosion resistance. Zero Tolerance sharpens it to a hair popping edge and the ELMAX ensures it holds that edge for a long time, even under hard use.

The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. A washer with caged ball bearings surrounds the pivot and makes opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562 is ready for action.

The handle has a G-10 textured scale in front and a stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won't overextend.

The unique pocketclip is reversible (left/right) and enables extra-deep carry in the pocket. .

Zero Tolerance - Hinderer Slicer Frame Lock - Stonewashed - ZT0562 - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and G-10 Black
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

The Zero Tolerance 0808 is our latest piece of pocket technology. It's a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. But the technology here isn’t circuits and wires. Instead, it’s advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system.

The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808’s blade is paired with chamfered titanium handles that provide a solid, and very durable, grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed. Move over, iPhone. The 0808 deserves pocket space.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel CTS204P
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance - Les George Folder Titanium - ZT0900 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: stonewash
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 124g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Les George - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback Stabilizer

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Carbon Fibre with folders in stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Flat

Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel 
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system Speedsafe