Last up date
-
CrushGrind - PARIS - Pepper Mill - Walnut Wood Finish - 29cm
The CrushGrind mechanism, the brainchild of Japanese inventor Mitsui Kamioka, revolutionized the grind market in 1994 with the introduction of a patented ceramic system.
This innovative device, guaranteed for 25 years, offers superior performance compared to competitors due to its greater capacity and versatility.- The mechanism is larger than conventional grinders, allowing it to grind more than double the amount of salt, pepper, spices or dried herbs.
- It is possible to clean the gear by grinding coarse salt adjusted to the minimum. In addition, the CrushGrind mechanism is removable and can be washed with water and detergent, ensuring thorough cleaning and long life.
- CrushGrind offers numerous models suitable for both consumers and the on-trade. The range includes grinds made from natural materials such as wood and products made from biocomposite, an environmentally sustainable material obtained by mixing wood fiber with oil derived from paper production.The name “Paris” was originally dedicated to Prince Henrik, a French cooking enthusiast and hedonist, in reference to the capital of France, with its imposing stature, combines walnut and stainless steel, adding a touch of elegance to functionality.
With the CrushGrind mechanism, you not only get a high-quality product, you also invest in a kitchen accessory that combines innovation, practicality, and style, perfect for those who want the best in their culinary environment.CGP29€53.28Only 1 leftOnly 1 left -
CrushGrind - VAASA Mill 13CM, green - 1 PCS
CrushGrind - VAASA Mill 13CM, green - 1 PCS
Get your spices grinding! This is a clean and fresh design – allowing the spices inside of the grinder to be the star of the show.
The Vaasa grinder is an upside down grinder that won’t leave any residues on your tabletop. The adjusting wheel at the top of the grinder makes it very easy to get just the right coarseness. Add your spices or mix your own blends and experience what freshly ground spices will do for your cooking.
The Vaasa series is based on a biocomposite material made of wood based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel.
The material has a low carbon footprint, and unlike crop-based biomaterials, this bio composite doesn’t interfere with a food-production chain.
The grinders are mounted with our patented CrushGrind® mechanism. -Material Glass, Biocomposite
Color Kampot Purple
Item Dimensions LxWxH 2 x 2 x 5.25 inches.
060200-0028€17.21Only 3 leftOnly 3 left -
CrushGrind - Billund - Oil / Vinegar set 2 pieces
CrushGrind - Billund - Oil / Vinegar set 2 pieces
BILLUND THE FUN DESIGN
The Billund series features a fun and playful design inspired by the famous Danish building bricks whose production began in the city of Billund.
BILLUND OIL / VINEGAR BOWL
The colour of the glass reflects the light and the colour varies depending on the contents. -Sits well on any table or in any kitchen and is perfect for oil and vinegar.
The silicone spout is cleverly designed to pour the condiment easily and avoid unwanted drips.
The shape is designed so that excess liquid flows back into the container after use.
It is made of borosilicate glass and the lid is made of a biocomposite material from certified wood pulp from legally and sustainably managed forests.
Material: biocomposite, glass
Height: 15.5 cm
⌀: 6 cm
Designer: IDEAS / Sam Murley
CGBOA26€56.15Only 1 leftOnly 1 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
T&G CrushGrind - Apollo Macinasale e macinape in acciaio INOX e acrilico, 15 cm
Macina sale e pepe Apollo 15 cm ,
questi macinasale e macinapepe utilizzano il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione.
Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine. T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8400€113.93Only 2 leftOnly 2 left -
Ravi - Wine Iceberg - Freshers
Wine Iceberg
- EFFICACE
Il raffreddatore Wine Iceberg mantiene il vostro vino freddo al pari di un secchiello con ghiaccio.
- PULITO
La vostra tavola rimane pulita e asciutta. Nessun bisogno di cubetti di ghiaccio, nessun disordine,nessuna macchia!
- COMPATTO
Occupa poco spazio sulla tavola e nell'armadietto in cucina.
-PRATICO
Glacette refrigerante removibile, da conservare in congelatore.
- POLIVALENTE
Adatto alla maggior parte delle bottiglie di Champagne e di vino.6228Special Price €16.39 Regular Price €20.49Only 1 leftOnly 1 left
-
Nutshucker Opener - The Nutcracker, kitchen accessories
Quasi Walnut Opener, di fabbricazione australiana, un tipo del tutto nuovo di aprinoci; con una lama forgiata in acciaio inossidabile e il design ergonomico.
Una simpatica idea regalo.5526€5.74Only 1 leftOnly 1 left -
The Hobbit - Ciondolo Thorin Scudodiquercia - Lo Hobbit - collana
Ciondolo ufficiale di Thorin Oakenshield in argento.
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione, Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-13Special Price €77.87 Regular Price €94.26Only 2 leftOnly 2 left
-
Hobbit - Penna a forma di chiave di Erebor e segnalibri di Thorin Scudodiquercia - Il Signore Degli Anelli
Penna a forma di chiave di Thorin tratta dal film The Hobbit con Segnalibro lenticolare 3D
Prodotto ufficiale
Thorin II, soprannominato Scudodiquercia (Oakenshield) un personaggio di Arda, l'universo immaginario fantasy creato dallo scrittore inglese J.R.R. Tolkien e compare ne Lo Hobbit e ha una presenza minore anche ne Il Signore degli Anelli.
il figlio di Thrin II e nipote di Re Thrr, oltre che il capo della compagnia di nani, a cui si unisce anche lo hobbit Bilbo Baggins, che riconquist la Montagna Solitaria da Smaug il drago, dopo una lunga missione.
Personaggio austero, invadente, molto orgoglioso e altero rispetto ai suoi consanguinei che lo accompagnano nella missione[2], Thorin rispecchia perfettamente le caratteristiche dei membri della sua razza, soprattutto per quanto riguarda la necessit di difendere e di riconquistare il proprio tesoro e, in particolare, l'Archepietra, la pi grande gemma mai scoperta nella Montagna Solitaria.NC-03€12.30Only 6 leftOnly 6 left -
The Hobbit - Miniatura Spada di Thorin Scudodiquercia - apri lettere NN1207 - prodotto ufficiale
The Hobbit - Riproduzione in scala 1:3 della spada di Thorin Oakenshield utilizzata nel film "The Hobbit"
Lama: Acciaio Inossidabile 420J2
Supporto: confezione in legno
Lunghezza spada: 19 cm.
Prodotto accompagnato dalla licenza ufficiale "Lord of the Rings" della New Line CinemaNC-07€30.33Only 1 leftOnly 1 left -
Ravi - The bucket pocket
Ravi - The bucket pocket Il secchiello per il ghiaccio in plastica modellabile, portatile e pieghevole.
Basta passare il secchiello sotto l' acqua calda per ammorbidirlo e modellarlo a piacere. Lo si riempe quindi di acqua fredda e ghiaccio per renderlo nuovamente rigido con la forma desiderata.
Il fondo del secchiello ha una pellicola colorata che dona all'acqua bellissimi riflessi colorati che regalano un pizzico do colore e divertimento alla tavola.
Colori assortiti: champagne, blu.6231Special Price €5.05 Regular Price €7.21Only 6 leftOnly 6 left -
CrushGrind - Billund - Grinder set 2 pieces
CrushGrind - Billund - Grinder set 2 pieces
An innovative and different mechanism CrushGrind holds the record of having incorporated the ceramic mechanism, invented by the Japanese Mitsui Kamioka, into a millstone and first introduced it to the market in 1994.
The mechanism, patented and guaranteed for 25 years, is larger than those found on the market, which allows for more than double the amount of salt, pepper, spices or dried herbs ground than the competition.
Because of its shape, all types of salt, pepper, spices and dried herbs can be ground indiscriminately.
Furthermore, it is easy to clean: when switching from one spice to another, the gear can be cleaned by grinding coarse salt, adjusting the grinder to the minimum. In addition, unlike all other grinders, the CrushGrind is detachable, so it can be easily cleaned with water and detergent, taking care to let it dry thoroughly.
Many models for every need The CrushGrind grinder offer includes numerous models, intended for consumers or the on-trade. In addition to models made of natural materials, such as wood, the company also offers products made entirely or partly of biocomposite material, obtained by mixing wood fibre with oil from paper production.
Such as the Billund model, not by chance named after the Danish city, home of Lego, whose shape is reminiscent of coloured bricks, available in various colours.
The Billund grinder is an upside-down grinder that leaves no residue on the table.
It has a silicone cap on the bottom that makes it easy to fill with the spices or blends you like to use.
The Billund series is a fun and playful design, inspired by the colourful building blocks of Denmark.
It is based on a bio-composite material consisting of wood-based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel. In addition, the material has a low carbon footprint and, unlike crop-based biomaterials, this biocomposite does not interfere with the food production chain.
Material: biocomposite
Height: 12 cm
⌀: 6 cm
Project by IDEAS / Sam Murley.
CG2BIL12€48.36Only 1 leftOnly 1 left -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
The Hobbit - Thorin Oakenshield key and map of Erebor NN1212 - The Hobbit
The Hobbit - Thorin Oakenshield key and map of Erebor NN1212 - The Hobbit
- Officially Licensed from the film trilogy The Hobbit
- Map of Thorin Oakenshield with wooden display including key Thorin
- Pack size: 11 x 39 x 43 cm
- Weight: 2.28 KgNN1212€69.67Out of stock -
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product
The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1204€30.33Out of stock -
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product
The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.Officially licensed product accompanied by "The Hobbit" for New Line Cinema
NN1224€30.33Out of stock -
The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product
The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product
Lord of the Rings - Playing in a 1: 3 of the dagger of Tauriel from "The Hobbit"
Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.Officially licensed product accompanied by "Lord of the Rings" in New Line Cinema
NN1213€30.33Out of stock -
The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit
The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit
Erebor is a dwarven city of enormous size, located in the mountains east of Mirkwood, which sees inside tall chambers filled with gold. The city was governed by an endless line of kings, including Thrain and Thorin, and for some years it was occupied by the ruthless dragon Smaug. It was also the capital of the United flourishing under the Mountain.
container wood
- Measures 26.5 x 8.5 x 2.2 cmmetal coins
- 5 dwarven coins of different sizesOfficially Licensed!
NN6087€27.87Out of stock -
Ravi - Refreshers for white wine , rose wine and spirits - NEW '
Ravi è un’idea innovativa in quanto rinfresca il vino nel momento stesso in cui viene servito.
Infatti non è la bottiglia che viene rinfrescata ma soltanto il vino.Il processo di rinfrescamento ha inizio quando il vino passa all’interno del Ravi.
In 10 secondi Ravi porterà un vino bianco, rosè dalla temperatura ambiente (22°-25°) alla temperatura perfetta per essere servito (8°-12°). Nessun bisogno di rafreddare un ottimo liquore con ghiaccio! Ravi raffredda whisky, scotch, gin, tequila, vodka, rum e altro.
Fatto d’inox 304, lo stesso materiale di cui sono fatte le vasche vinicole di fermentazione, il condotto interno del Ravi permette di mantenere intatte le caratteristiche del vino senza mai alterarne il gusto.
Disegnato dal famoso designer canadese Michel Dallaire, Ravi si presenta come un oggetto ergonomico e di facile utilizzo.Una volta posto sul collo della bottiglia, siccome non tutti i vini vengono bevuti alla stessa temperatura, Ravi possiede una valvola che permette, al momento, di regolare il flusso di vino in uscita potendo quindi regolarne anche la temperatura.
Ravi è composto da due parti. La parte superiore viene conservata nel congelatore mentre la base può essere conservata insieme alle posate.Il processo rivoluzionari di Ravi Vi permetterà di portare il vino alla temperatura ideale di servizio istantaneamente e resterà efficacie per più di due ore una volta tirato fuori dal congelatore.Ravi deve essere lasciato nel congelatore per almeno 6 ore prima del suo utilizzo.
Una volta tirato fuori, assemblare le due parti che compongono Ravi, metterlo sul collo della bottiglia e ostruendo la valvola dell’aria inclinare la bottiglia. Una volta in posizione di servizio liberare la valvola dell’aria togliendo il pollice. Per effettuare il primo servizio lasciare fuoriuscire il vino senza rallentarne l’uscita; per servire il secondo bicchiere potete leggermente rallentare il flusso di vino in uscita ostruendo parzialmente la valvola dell’aria con il pollice;per il terzo bicchiere rallentare il flusso un po’ di più e così avanti per gli altri bicchieri.
L’utilizzo di Ravi per servire molti bicchieri porterà un aumento della temperatura interna del condotto, il tutto dovuto al continuo passaggio del vino al suo interno. Ecco perché è importante regolare la velocità del flusso di vino in uscita che Vi permetterà quindi di assicurare un sufficiente abbassamento di temperatura.
Ravi è concepito per poter rinfrescare una bottiglia di vino completa per circa due ore.
Ravi è il dispositivo di refrigerazione per vino più piccolo sul mercato: facile da trasportare in una borsa termica per pic-nic .
Ravi è molto utile per i vini bianchi,rosati e liquori. Potete facilmente rinfrescare una bottiglia che è rimasta a lungo sulla tavola senza più bisogno di dover utilizzare l’ingombrante secchio con il ghiaccio o di dover continuamente alzarvi durante la cena per portare il vino in frigorifero.
Inserite semplicemente Ravi sul collo della bottiglia e degustate il Vostro vino alla giusta temperatura fino all’ultima goccia.
La confezione include:
- rinfrescatore6232W€36.48Only 0 leftOnly 0 leftOut of stock -
T&G CrushGrind - Stoccolma Macinasale e macinape in acciaio INOX e acrilico, 19 cm
Macinasale e pepe Stoccolma 19 cm.
Questi macinasale e macinapepe utilizzano
il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione. Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine.
T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8401€113.93Only 0 leftOnly 0 leftOut of stock -
The Hobbit - Il contratto di Bilbo Baggins NN1295 - Lo Hobbit - prodotto ufficiale
Riproduzione dettagliata del contratto di Bilbo. Misura circa 27x167cm.
Riproduzione UfficialeNC-02€35.25Out of stock -
The Hobbit - Ciondolo di Galadriel a Fiore - collana ufficiale
Riproduzione ufficiale della collana di Galadriel, dietro concessione della "New Line Cinema"
Realizzato in argento
Certificato di autenticit New line Cinema
Dama Galadriel un personaggio immaginario dei romanzi fantasy di J.R.R. Tolkien. Era una nobile elfa della Terra di Mezzo, che regn insieme a Sire Celeborn sul reame di Lrien. Spesso viene citata come La Dama di Lrien o La Dama dei Galadhrim. Al di fuori del reame di Lothlrien, tuttavia ci si riferisce semplicemente chiamandola Dama Galadriel o La Dama. Lei e Celeborn divennero noti come Il Signore e la Dama. Galadriel non fu mai regina, sebbene fosse di sangue reale.
Il suo nome paterno era Artanis ("nobile donna") e quello materno Nerwen ("ragazza-uomo"), in riferimento alla sua notevole altezza e alla sua forza sia corporea che interiore. Ma il nome che prefer fra tutti fu quello di Galadriel, versione Sindarin del Telerin Quenya Alatriel, "essendo il pi bello dei suoi nomi, quello che le era stato dato dal suo innamorato, Celeborn dei Teleri, che pi tardi spos nel Beleriand", che significa "donna coronata con una ghirlanda di luce brillante", in riferimento ai suoi capelli. Gli Elfi di Tirion ritenevano che nei capelli di Galadriel fosse rimasta imprigionata la luce dei Due Alberi di Valinor, Laurelin e Telperion. Fu molto ammirata da Fanor e forse ne fu fonte d'ispirazione per la creazione dei Silmaril.NC-12€77.87Out of stock -
The Hobbit - Ciondolo di Galadriel - collana ufficiale
Riproduzione ufficiale della collana di Galadriel, dietro concessione della "New Line Cinema"
Realizzato in argento
Certificato di autenticit New line Cinema
Dama Galadriel un personaggio immaginario dei romanzi fantasy di J.R.R. Tolkien. Era una nobile elfa della Terra di Mezzo, che regn insieme a Sire Celeborn sul reame di Lrien. Spesso viene citata come La Dama di Lrien o La Dama dei Galadhrim. Al di fuori del reame di Lothlrien, tuttavia ci si riferisce semplicemente chiamandola Dama Galadriel o La Dama. Lei e Celeborn divennero noti come Il Signore e la Dama. Galadriel non fu mai regina, sebbene fosse di sangue reale.
Il suo nome paterno era Artanis ("nobile donna") e quello materno Nerwen ("ragazza-uomo"), in riferimento alla sua notevole altezza e alla sua forza sia corporea che interiore. Ma il nome che prefer fra tutti fu quello di Galadriel, versione Sindarin del Telerin Quenya Alatriel, "essendo il pi bello dei suoi nomi, quello che le era stato dato dal suo innamorato, Celeborn dei Teleri, che pi tardi spos nel Beleriand", che significa "donna coronata con una ghirlanda di luce brillante", in riferimento ai suoi capelli. Gli Elfi di Tirion ritenevano che nei capelli di Galadriel fosse rimasta imprigionata la luce dei Due Alberi di Valinor, Laurelin e Telperion. Fu molto ammirata da Fanor e forse ne fu fonte d'ispirazione per la creazione dei Silmaril.NC-10€90.16Out of stock -
The Hobbit - Portachiavi Chiave di Erebor NN1251 - Lo Hobbit
Prodotto con licenza ufficiale!NC-04€9.84Out of stock -
Heckler & Koch - Ally Folder Tanto - 14447SB - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8
Trattamento Lama: teflonatura
Manicatura: acciaio inox
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 70g.
Chiusura: Frame Lock
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: astuccio di cartone nero e grigio con loghi H&K
Note: Skull Crasher Posteriore2748€48.36Out of stock
