Last up date
-
CrushGrind - PARIS - Pepper Mill - Walnut Wood Finish - 29cm
The CrushGrind mechanism, the brainchild of Japanese inventor Mitsui Kamioka, revolutionized the grind market in 1994 with the introduction of a patented ceramic system.
This innovative device, guaranteed for 25 years, offers superior performance compared to competitors due to its greater capacity and versatility.- The mechanism is larger than conventional grinders, allowing it to grind more than double the amount of salt, pepper, spices or dried herbs.
- It is possible to clean the gear by grinding coarse salt adjusted to the minimum. In addition, the CrushGrind mechanism is removable and can be washed with water and detergent, ensuring thorough cleaning and long life.
- CrushGrind offers numerous models suitable for both consumers and the on-trade. The range includes grinds made from natural materials such as wood and products made from biocomposite, an environmentally sustainable material obtained by mixing wood fiber with oil derived from paper production.The name “Paris” was originally dedicated to Prince Henrik, a French cooking enthusiast and hedonist, in reference to the capital of France, with its imposing stature, combines walnut and stainless steel, adding a touch of elegance to functionality.
With the CrushGrind mechanism, you not only get a high-quality product, you also invest in a kitchen accessory that combines innovation, practicality, and style, perfect for those who want the best in their culinary environment.CGP29€53.28Only 1 leftOnly 1 left -
CrushGrind - VAASA Mill 13CM, green - 1 PCS
CrushGrind - VAASA Mill 13CM, green - 1 PCS
Get your spices grinding! This is a clean and fresh design – allowing the spices inside of the grinder to be the star of the show.
The Vaasa grinder is an upside down grinder that won’t leave any residues on your tabletop. The adjusting wheel at the top of the grinder makes it very easy to get just the right coarseness. Add your spices or mix your own blends and experience what freshly ground spices will do for your cooking.
The Vaasa series is based on a biocomposite material made of wood based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel.
The material has a low carbon footprint, and unlike crop-based biomaterials, this bio composite doesn’t interfere with a food-production chain.
The grinders are mounted with our patented CrushGrind® mechanism. -Material Glass, Biocomposite
Color Kampot Purple
Item Dimensions LxWxH 2 x 2 x 5.25 inches.
060200-0028€17.21Only 3 leftOnly 3 left -
CrushGrind - Billund - Oil / Vinegar set 2 pieces
CrushGrind - Billund - Oil / Vinegar set 2 pieces
BILLUND THE FUN DESIGN
The Billund series features a fun and playful design inspired by the famous Danish building bricks whose production began in the city of Billund.
BILLUND OIL / VINEGAR BOWL
The colour of the glass reflects the light and the colour varies depending on the contents. -Sits well on any table or in any kitchen and is perfect for oil and vinegar.
The silicone spout is cleverly designed to pour the condiment easily and avoid unwanted drips.
The shape is designed so that excess liquid flows back into the container after use.
It is made of borosilicate glass and the lid is made of a biocomposite material from certified wood pulp from legally and sustainably managed forests.
Material: biocomposite, glass
Height: 15.5 cm
⌀: 6 cm
Designer: IDEAS / Sam Murley
CGBOA26€56.15Only 1 leftOnly 1 left -
Ilsa - Set of 2 Gaskets with filter for Carmencita Pop aluminium coffee maker 6 cups
Ilsa - Set of 2 Gaskets with filter for Carmencita Pop aluminium coffee maker 6 cups99B06RIC€3.69Only 1 leftOnly 1 left
-
Ilsa - Set of 2 Gaskets with Filter for Carmencita Pop Aluminium 2-cup Coffee Maker
Ilsa - Set of 2 Gaskets with Filter for Carmencita Pop Aluminium 2-cup Coffee Maker99B02RIC€3.27Only 2 leftOnly 2 left -
Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION
Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION
The first item produced under the ILSA brand is the iconic Neapolitan coffee maker in 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are returning to coffee after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle for use on all hobs
99B06€53.28Only 4 leftOnly 4 left -
Ilsa - Carmencita Pop coffee maker alum. 3 cups - INDUCTION
Ilsa - Caffettiera Carmencita Pop aluminium 3 cups - induction
The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.
The first item produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of a regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its worldwide recognised Lavazza brand.
Check before purchase that your induction hob actions with the diameter measurement of the coffee pot99B03€44.26Only 3 leftOnly 3 left -
Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction
Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction
The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.
The first item produced under the ILSA brand is the iconic Caffettiera Napoletana in 99% pure aluminium, which has become the symbol of a regained wealth on the tables of Italians who are returning to drinking coffee after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its Lavazza brand, recognised throughout the world.
99B02€35.66Only 2 leftOnly 2 left -
Ilsa - Carmencita Pop alum coffee maker. 1 cup
Ilsa - Caffettiera Carmencita Pop aluminium 1 cup
The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.
The first article produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.
Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.
Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium, to fully enhance the taste of coffee, in keeping with Italian tradition.
The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.
The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.
The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on gas, glass-ceramic and electric hobs, perfect for an important gift thanks to its worldwide recognised Lavazza brand.
Check before purchase that your induction hob actions with the diameter measurement of the coffee pot99B01€26.23Only 3 leftOnly 3 left -
Ilsa - Aluminium Neapolitan Coffee Maker 6 cups - Made in Italy
The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.
Before the moka, which has speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.
NEAPOLITAN COFFEE POT 6 CUPS IN ALUMINIUM
The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.
The procedure then consists of the following steps:
1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.
2) Screw the filter on top of the tank.
3) Fill the perforated tank with water, always up to the indicated limit.
4) Insert the hollow tank into the perforated tank.
5) Add the body with the cap and screw in.
6) Place on the side with the water tank.
7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.
8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.
40060€32.38Only 1 leftOnly 1 left -
Ilsa - Aluminium Neapolitan Coffee Maker 3 cups - Made in Italy
The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.
Before the moka, which speeded up the preparation of coffee, the famous black beverage was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.
CAFFETTIERA NAPOLETANA 3 CUPS IN ALUMINIUM
The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.
The procedure then consists of the following steps:
1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.
2) Screw the filter on top of the tank.
3) Fill the perforated tank with water, always up to the indicated limit.
4) Insert the hollow tank into the perforated tank.
5) Add the body with the cap and screw it on.
6) Place on the side with the water tank.
7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.
8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.
40030N€27.46Only 2 leftOnly 2 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
Ilsa - Neapolitan Aluminium Coffee Pot 1 cup - Made in Italy
The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world. Before the moka, which speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.
CAFFETTIERA NAPOLETANA 1 CUP IN ALUMINIUM
The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.
The procedure then consists of the following steps:
1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.
2) Screw the filter on top of the tank.
3) Fill the perforated tank with water, always up to the indicated limit.
4) Insert the hollow tank into the perforated tank.
5) Add the body with the cap and screw it on.
6) Place on the side with the water tank.
7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.
8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.
40010N€24.18Only 3 leftOnly 3 left -
T&G CrushGrind - Apollo Macinasale e macinape in acciaio INOX e acrilico, 15 cm
Macina sale e pepe Apollo 15 cm ,
questi macinasale e macinapepe utilizzano il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione.
Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine. T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8400€113.93Only 2 leftOnly 2 left -
Ravi - Wine Iceberg - Freshers
Wine Iceberg
- EFFICACE
Il raffreddatore Wine Iceberg mantiene il vostro vino freddo al pari di un secchiello con ghiaccio.
- PULITO
La vostra tavola rimane pulita e asciutta. Nessun bisogno di cubetti di ghiaccio, nessun disordine,nessuna macchia!
- COMPATTO
Occupa poco spazio sulla tavola e nell'armadietto in cucina.
-PRATICO
Glacette refrigerante removibile, da conservare in congelatore.
- POLIVALENTE
Adatto alla maggior parte delle bottiglie di Champagne e di vino.6228Special Price €16.39 Regular Price €20.49Only 1 leftOnly 1 left
-
Ravi - The bucket pocket
Ravi - The bucket pocket Il secchiello per il ghiaccio in plastica modellabile, portatile e pieghevole.
Basta passare il secchiello sotto l' acqua calda per ammorbidirlo e modellarlo a piacere. Lo si riempe quindi di acqua fredda e ghiaccio per renderlo nuovamente rigido con la forma desiderata.
Il fondo del secchiello ha una pellicola colorata che dona all'acqua bellissimi riflessi colorati che regalano un pizzico do colore e divertimento alla tavola.
Colori assortiti: champagne, blu.6231Special Price €5.05 Regular Price €7.21Only 6 leftOnly 6 left -
CrushGrind - Billund - Grinder set 2 pieces
CrushGrind - Billund - Grinder set 2 pieces
An innovative and different mechanism CrushGrind holds the record of having incorporated the ceramic mechanism, invented by the Japanese Mitsui Kamioka, into a millstone and first introduced it to the market in 1994.
The mechanism, patented and guaranteed for 25 years, is larger than those found on the market, which allows for more than double the amount of salt, pepper, spices or dried herbs ground than the competition.
Because of its shape, all types of salt, pepper, spices and dried herbs can be ground indiscriminately.
Furthermore, it is easy to clean: when switching from one spice to another, the gear can be cleaned by grinding coarse salt, adjusting the grinder to the minimum. In addition, unlike all other grinders, the CrushGrind is detachable, so it can be easily cleaned with water and detergent, taking care to let it dry thoroughly.
Many models for every need The CrushGrind grinder offer includes numerous models, intended for consumers or the on-trade. In addition to models made of natural materials, such as wood, the company also offers products made entirely or partly of biocomposite material, obtained by mixing wood fibre with oil from paper production.
Such as the Billund model, not by chance named after the Danish city, home of Lego, whose shape is reminiscent of coloured bricks, available in various colours.
The Billund grinder is an upside-down grinder that leaves no residue on the table.
It has a silicone cap on the bottom that makes it easy to fill with the spices or blends you like to use.
The Billund series is a fun and playful design, inspired by the colourful building blocks of Denmark.
It is based on a bio-composite material consisting of wood-based cellulose fibres from certified, sustainably managed forests. The material gives the products a warm, natural and earthy feel. In addition, the material has a low carbon footprint and, unlike crop-based biomaterials, this biocomposite does not interfere with the food production chain.
Material: biocomposite
Height: 12 cm
⌀: 6 cm
Project by IDEAS / Sam Murley.
CG2BIL12€48.36Only 1 leftOnly 1 left -
Ilsa - Set of 2 Gaskets with filter for Carmencita Pop Aluminium coffee maker. 1 cup
Ilsa - Set of 2 Gaskets with filter for Carmencita Pop Aluminium coffee maker. 1 cup99B01RIC€2.87Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
Ravi - Refreshers for white wine , rose wine and spirits - NEW '
Ravi è un’idea innovativa in quanto rinfresca il vino nel momento stesso in cui viene servito.
Infatti non è la bottiglia che viene rinfrescata ma soltanto il vino.Il processo di rinfrescamento ha inizio quando il vino passa all’interno del Ravi.
In 10 secondi Ravi porterà un vino bianco, rosè dalla temperatura ambiente (22°-25°) alla temperatura perfetta per essere servito (8°-12°). Nessun bisogno di rafreddare un ottimo liquore con ghiaccio! Ravi raffredda whisky, scotch, gin, tequila, vodka, rum e altro.
Fatto d’inox 304, lo stesso materiale di cui sono fatte le vasche vinicole di fermentazione, il condotto interno del Ravi permette di mantenere intatte le caratteristiche del vino senza mai alterarne il gusto.
Disegnato dal famoso designer canadese Michel Dallaire, Ravi si presenta come un oggetto ergonomico e di facile utilizzo.Una volta posto sul collo della bottiglia, siccome non tutti i vini vengono bevuti alla stessa temperatura, Ravi possiede una valvola che permette, al momento, di regolare il flusso di vino in uscita potendo quindi regolarne anche la temperatura.
Ravi è composto da due parti. La parte superiore viene conservata nel congelatore mentre la base può essere conservata insieme alle posate.Il processo rivoluzionari di Ravi Vi permetterà di portare il vino alla temperatura ideale di servizio istantaneamente e resterà efficacie per più di due ore una volta tirato fuori dal congelatore.Ravi deve essere lasciato nel congelatore per almeno 6 ore prima del suo utilizzo.
Una volta tirato fuori, assemblare le due parti che compongono Ravi, metterlo sul collo della bottiglia e ostruendo la valvola dell’aria inclinare la bottiglia. Una volta in posizione di servizio liberare la valvola dell’aria togliendo il pollice. Per effettuare il primo servizio lasciare fuoriuscire il vino senza rallentarne l’uscita; per servire il secondo bicchiere potete leggermente rallentare il flusso di vino in uscita ostruendo parzialmente la valvola dell’aria con il pollice;per il terzo bicchiere rallentare il flusso un po’ di più e così avanti per gli altri bicchieri.
L’utilizzo di Ravi per servire molti bicchieri porterà un aumento della temperatura interna del condotto, il tutto dovuto al continuo passaggio del vino al suo interno. Ecco perché è importante regolare la velocità del flusso di vino in uscita che Vi permetterà quindi di assicurare un sufficiente abbassamento di temperatura.
Ravi è concepito per poter rinfrescare una bottiglia di vino completa per circa due ore.
Ravi è il dispositivo di refrigerazione per vino più piccolo sul mercato: facile da trasportare in una borsa termica per pic-nic .
Ravi è molto utile per i vini bianchi,rosati e liquori. Potete facilmente rinfrescare una bottiglia che è rimasta a lungo sulla tavola senza più bisogno di dover utilizzare l’ingombrante secchio con il ghiaccio o di dover continuamente alzarvi durante la cena per portare il vino in frigorifero.
Inserite semplicemente Ravi sul collo della bottiglia e degustate il Vostro vino alla giusta temperatura fino all’ultima goccia.
La confezione include:
- rinfrescatore6232W€36.48Only 0 leftOnly 0 leftOut of stock -
T&G CrushGrind - Stoccolma Macinasale e macinape in acciaio INOX e acrilico, 19 cm
Macinasale e pepe Stoccolma 19 cm.
Questi macinasale e macinapepe utilizzano
il meccanismo originale in ceramica Crush Grind® progettato in particolare per macinare il sale, il pepe ed altre spezie.
Le lame a spirale delle macine sono prodotte con un processo tridimensionale di altissima tecnologia, progettate per dare una resa nettamente superiore rispetto a quelle convenzionali stampate per compressione. Le macine hanno, inoltre, una finitura più liscia che permette una macinatura ottimale sia grossolana che fine.
T&G Crush Grind Mills "The World's Best Mills": - il meccanismo è garantito a vita - facile da riempire - senza perno centrale - meccanismo in ceramica - niente ruggine, nessuna porosità, a differenza del metalllo non ossiderà il cibo - macina praticamente tutto, dal pepe e sale ai semi di coriandolo o al peperoncino essicato - raccomandato da " Maldon Salt Company" per il loro famoso sale marino dell'Essex - testato per un uso domestico pari a 400 anni!
8401€113.93Only 0 leftOnly 0 leftOut of stock
