Last up date

The Zero Tolerance 0808BLU, with blue-anodized handle, is a sprint run built in a limited quantity.

The 0808 is a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. It features advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system. The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808GLD’s blade is paired with chamfered titanium handles that provide a solid, comfortable grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed.

This blue-anodized edition of the 0808, the 0808BLU, is a sprint run. Quantities are limited. Check with your local ZT dealer for availability.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium blu
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing - Sprint Run Limited Edition

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, and custom parts made specifically by Hinderer in his workshop. Specifically, the entire titanium screws, spacers, clips, cover-clips and all the parties in purple coloration are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial handcrafted pieces
Production Lama USA
Blade: stainless steel M390
Blade treatment: matt black DLC
Handle: Titanium with matte black DLC finish - screws and spacers purple anodized titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Weight: 159g.
Lock: Frame Lock
Clip: Removable, Multiposition, anodized titanium
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper - Curiosity: the warranty certificate is erroneously reported the CTS-204P steel; the company then decided instead to produce the knife using a stainless steel M390

Intended use: Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Weight: 124g.
Closing: framelock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - Design by Les George - Opening KVT on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: DLC Coating
Handle: G10 Orange and Titanium DLC Coating
Blade length: 91mm.
Blade thickness: 3.6mm.
Closed Length: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Weight: 178g.
Lock: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Note: Sprint Run limited edition, but not numbered - in collaboration with Emerson Knives - patented opening system Wave

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel M390 60/61HRC
Blade treatment: Stonewash
Handle: Bronze Anodized Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 155g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

The wildly popular Jumbo™ Versipack® reigns supreme, inspiring 6 different variants that boast 38% more space than the #0403 FATBOY™ VERSIPACK®. Purposefully designed, the multi-functional Jumbo™ has a quick release buckle and tuck-in flap for immediate access to multiple pockets & dividers, a spacious rear compartment with Hook-&-Loop interior for CCW, a paracord cinch pouch fitted for 32oz/1L water bottle or radio, and a quick-release ergonomic shoulder & waist strap for fluent mobility.

It's no wonder Maxpedition® customers around the globe rely on the Jumbo Versipack as their #1 everyday carry bag.

Product Dimensions
Main compartment: 8"(L) x 4"(W) x 8.5"(H) View Product Dimensions Diagram
Exterior front
10"(L) x 8"(H) closure flap
2" quick release buckle
One (1) 6.5"(L) x 2"(H) loop field for patches
One (1) 7"(L) x 5.5"(H) zippered pocket
One (1) 6"(L) x 5"(H) slip pocket
One (1) 6"(L) x 8"(H) x 1.75"(W) zippered pocket
One (1) 6"(L) x 5'(H) internal mesh pocket
Internal key retention clip
Exterior rear
Breathable padding for comfort
Removable 1" webbing waist belt, with SRB closure
Exterior left
One (1) 7.5"(H) x 3.5" diameter cord cinch pouch with base-grommet for 32oz/1L water bottle or radio
1.5" x 5" hook and loop bottle retainer, with cinch cord
Exterior right
One (1) 3"(L) x 6"(H) x 1.5"(W) zippered pouch, with 2 rows / 2 channels PALS webbing
One (1) interior 3"(L) x 4.5"(H) slip divider
One (1) exterior 3" x 7" slip pocket
Exterior top
One (1) 7"(L) x 3"(W) x 1"(H) zippered pouch
One (1) 7"(L) x 2"(H) loop field for patches
Exterior bottom
3-channel 3/4" webbing daisy chain
Main interior front
One (1) 8"(L) x 6"(H) slip pocket
Main interior rear
One (1) 8"(L) x 6"(H) slip pocket
Straps
Fixed shoulder strap made from 2" webbing 33" min. adjustable to 48" max. length; with 2' non-slip shoulder pad, 2" quick release buckle and Keyper™ attachment point
Additional storage
9"(L) x 10"(H) concealed zippered compartment with internal 7"(L) x 8"(H) loop field for CCW
Other features
Grab handle made from 0.75" webbing
Cinch cord storm collar helps keep contents out of the weather
Removable waist strap
5-channel PALS webbing on right strap base for attaching other Maxpedition gear
#0413 JUMBO S-TYPE™ VERSIPACK® available for left side carry

Modello per mancini

Il FatBoy è molto più di un pratico zaino monospalla. E' lo stato dell'arte degli accessori e provvede ad un sicuro contenimento di tutti gli accessori e ad una rapida accessibilità all'equipaggiamento di uso quotidiano.

Il compartimento primario ha un'enorme capacità di 156 cu. in. ed è dotato di chiusure resistenti all'acqua. Ha inoltre molteplici ancoraggi esterni che permettono di ampliare il tutto con tasche ed accessori modulari opzionali.

Ogni FatBoy è accompagnato da un comodo spallaccio regolabile antiscivolo per garantire il massimo confort durante l'uso prolungato.

* Scomparto Principale: 6.5" (L) x 3" (W) x 8" (H)
* Tasca Frontale: 5" (L) x 1.5" (W) x 7" (H)
* Scomparto Posteriore: 8" (L) x 7.5" (W)
* Lato A (tasca con 2 file di attacchi): 3" (L) x 1.5" (W) x 6" (H)
* Lato B (fodero): 1.5" (L) x 1" (W) x 5" (H);
* Lato C (tasca per cellulare): 2.5" (L) x 1" (W) x 4" (H) con due portapenne
* Spallaccio : strap integrali da 2" antiscivolo.

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium Anodized gray with black trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 123mm.
Overall length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: stonewashed
Handle: G10 on stainless steel folders
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 215mm.
Thick when closed: 14mm.
Weight: 198g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Les George - Opening KVT on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 213mm.
Weight: 177g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso - Opening KVT on ball bearings

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

Intended use: EDC / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Penna tattica con corpo in alluminio anodizzato 6061 T-6 aeronautico in colore "terra marrone". Tappo a pressione con clip integrata, punta sfondavetri di emergenza ai carburi di tungsteno nella parte inferiore del fusto.

Peso di 36.9g, Lunghezza di 135cm. e diametro di 1.5cm.

Inchiostro blu con refill a tecnologia Rite in the Rain®: scrive a temperature da -35° a oltre 120°, sott’acqua, su superfici sporche e oleose, dura 15 volte in più rispetto ad un normale refill non pressurizzato, può tracciare un riga continua di 14 km grazie al particolare inchiostro tixotropico, dalla consistenza semisolida che viene resa fluida dalla speciale sfera in tungsteno.

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

Trapper Dark Red - CA00646 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Intended use: Sport / Collection

Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearing

Utilisation prévue: Sport / Collection

Type de production: industriel
Pays de production: États-Unis
Lame: Acier inoxydable Elmax 59 / 61HRC
Lame de traitement: Stonewash
Poignée: Titane
Longueur de la lame: 89mm.
Épaisseur de lame: 4mm.
Longueur fermée: 96mm.
Longueur totale: 119mm.
Épais lorsqu'il est fermé: 13mm.
Poids: 165g.
Fermeture: Frame Lock
Clip: amovible, multi-positions, en acier inoxydable
Conditionnement: boîte en carton avec des logos Zero Tolerance
Notes: Design by Todd Rexford - Ouverture KVT roulement à billes

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel S35VN
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance and Rick Hinderer teamed up to build the new 0562 with its exclusive Hinderer "slicer" grind.

The ELMAX® powdered steel blade with flat-ground “slicer” grind provides both slicing efficiency and a tough point. ELMAX is a third-generation powdered steel with virtually no nonmetallic inclusions. This means it offers an extremely uniform distribution of carbides for high wear and corrosion resistance. Zero Tolerance sharpens it to a hair popping edge and the ELMAX ensures it holds that edge for a long time, even under hard use.

The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. A washer with caged ball bearings surrounds the pivot and makes opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562 is ready for action.

The handle has a G-10 textured scale in front and a stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won't overextend.

The unique pocketclip is reversible (left/right) and enables extra-deep carry in the pocket. .

Zero Tolerance - Hinderer Slicer Frame Lock - Stonewashed - ZT0562 - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and G-10 Black
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

The Zero Tolerance 0808 is our latest piece of pocket technology. It's a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. But the technology here isn’t circuits and wires. Instead, it’s advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system.

The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808’s blade is paired with chamfered titanium handles that provide a solid, and very durable, grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed. Move over, iPhone. The 0808 deserves pocket space.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel CTS204P
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance - Les George Folder Titanium - ZT0900 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: stonewash
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 124g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Les George - Opening KVT ball-bearing

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback Stabilizer

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Carbon Fibre with folders in stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel 
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system Speedsafe

Maxpedition - Octa Versipack Khaki MX455K pouch

Pouch Maxpedition Octa Versipack Khaki.

The main compartment measures 22.86cm x 12.7cm x 7.62cm, the front measuring 15.24cm x 12.7cm x 3.81cm.

The two side pockets measure 13.97cm x 10.16cm and 20.32cm x 10.16cm.

On the top there is a compartment for the trasporo a flashlight, waist measurement mt 1.22.

color desert

Othello Solingen Germany by Anton Wingen - Bowie Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: craft
Blade: stainless steel 440
Production Blade: Germany
Handle: deer
Blade length: 160mm.
Blade Thickness: 6mm.
Length closed: -
Overall length: 295mm.
Balancing: -
Weight: 374g.
Closure: -
Clip: -
Sheath: Leather
Notes: vintage knives

Description: Maxpedition SaberCat Versipack.

Una variante supersize del Versipack Proteus, con molte più funzioni.

Il vano principale misura 25.4cm x 17.78cm x 10.16cm,

il vano frontale misura 17.78cm x 17.78cm x 3.81cm, i vani laterali misurano 17.78cm x 10.16cm x 6.35cm.

Colore Khaki -

Maxpedition - Proteus Versipack Khaki - 0402K

TECHNICAL PRODUCTS MAXPEDITION

* 1000 denier ballistic nylon with water-resistant and abrasion
* Treatment DuPont Teflon Fabric Protector to make nylon resistant to dirt and dust
* YKK high strength
* Stress points double stitched together, triple, quad and in X
* UTX-Duraflex nylon buckles for maximum noiseless opening and closing
* Stitched with high tensile nylon
* Padding vulcanizates with polysulphide acid xantico Robac AS-100 to ensure maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and ropes made of military grade paracord

FEATURES PROTEUS

* Bag highly compartizzata with large capacity expansion by applying external accessories
* Main compartment of 20x15x10cm
* Overall dimensions of 38x18x9cm
* Can be used as a bag or pouch
* Full compatibility with accessories such SPRINGS

MAINTENANCE

* Pass a clean, damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergent or bleach
* Do not iron

Maxpedition E.D.C. Pocket Organizer bag 0246F

Maxpedition E.D.C. Pocket Organizer green leaf.

Compact Design.

Measuring 12.7cm x 17.78cm x 1.90cm.

It fits perfectly in the pocket of cargo pants or backpack / bag.

Full clamshell opening main compartment with double zipper.

Inside has a pocket on the left, a keychain and a elastic organizer with 9 compartments.

Inside has a pocket on the right, a hook and an elastic organizer with 6 compartments.

The exterior features a front mesh pocket with hook-and-loop closure.

At the rear it has a handle.

Maxpedition - FR-1 Combat Medical Pouch Foliage Green 0226F

The pockets of the Maxpedition FR-1 is definitely a more advanced version of the common pocket for first aid, thanks to the versatility afforded it.

It can be used as a normal bag or as a multi-purpose pocket for first aid kit.

Overall Dimensions: 7 "x 5" x 3 "with full zipper opening

Carrying handle

Front: 2 rows of MOLLE attachments, 2 loops 2.5 "each

Side frame: 2 rows of MOLLE attachments, 1 Loop

Equipped with D-Rings for attaching a shoulder strap (optional accessory, not included)

Compatible with hooks Tie Tac-5 "is not included, sold separately

The pocket opens to its full length, and inside there are many lanyards (paracord) with adjustable clips that allow you to adjust the maximum angle of opening.

On both halves (more inside) we find numerous elastic loops of various sizes that allow you to maintain balances objects placed inside it.

This pocket is also provided on the inside of a coupling in paracord, to which it is possible to hang various objects, such as a torch for example.

Material: Fabric Nylon / Cordura 1000 denier, rugged and water resistant.

Teflon protection: long-lasting protection against water stains or oil and dust.

Simple to clean, requires no special maintenance: Only clean using a damp cloth and allow to dry naturally. Do not machine wash. Do not use detergent or bleach.

Resistant YKK zippers.

UTX-Duraflex nylon buckles with silent closure.

Internal seams taped and finished.