Last up date

Faithful reproduction of the Roman sword produced by Windlass

Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment

"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "

The Blacksword fantasy sword features a burnished tempered carbon steel blade.

The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp

Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.

High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.

Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

The PUP (Phone Utility Pouch) model has an easy-access external pocket designed to safely store and transport mobile phones or radios.

The unique design allows you to extract the mobile phone / radio with a single gesture. The lateral elastic retention keeps the cellphone or radio in place securely. There is also a main zippered compartment with a mesh pocket to organize everything at its best.

The PUP is supplied with two TacTie PJC3 rear clips made of polymers designed for the modular attachment to any surface compatible with MOLLE type systems such as ATLAS or PALS.

* Total dimensions: 8.9x7.6x15.2cm
* Front pocket: 8.9x4.5x13.3 / 17.8 (max) cm
* Main Bought: 8.9x5.1x15.2
* Weight: 130g

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

The Valence (pronounced "VAY-LENCE") is a CCW technology (concealed carry weapon) shoulder bag with adjustable belt for right or left side transport. The backpack can easily be transformed from a shoulder bag and vice versa. It has a padded main compartment, with dual access, closed by a double zipper equipped with lockable sliders, designed to accommodate laptops / tablets up to 13 inches. It also has a CCW back compartment with a double hook security lock.

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

VALENCE FEATURES

* Internal volume of 10L
* Overall dimensions of 27.9x14x36.8cm
* Front pocket of 24.8x5.1x35.6cm
* Main compartment of 24.1x7.6x36.8cm
* CCW compartment of 24.1x35.6cm
* Weight of 816g.
* Ambidextrous single shoulder bag
* Removable belt with double quick release
* Closure with bidirectional zip closable with padlock

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

The wildly popular Jumbo™ Versipack® reigns supreme, inspiring 6 different variants that boast 38% more space than the #0403 FATBOY™ VERSIPACK®. Purposefully designed, the multi-functional Jumbo™ has a quick release buckle and tuck-in flap for immediate access to multiple pockets & dividers, a spacious rear compartment with Hook-&-Loop interior for CCW, a paracord cinch pouch fitted for 32oz/1L water bottle or radio, and a quick-release ergonomic shoulder & waist strap for fluent mobility.

It's no wonder Maxpedition® customers around the globe rely on the Jumbo Versipack as their #1 everyday carry bag.

Product Dimensions
Main compartment: 8"(L) x 4"(W) x 8.5"(H) View Product Dimensions Diagram
Exterior front
10"(L) x 8"(H) closure flap
2" quick release buckle
One (1) 6.5"(L) x 2"(H) loop field for patches
One (1) 7"(L) x 5.5"(H) zippered pocket
One (1) 6"(L) x 5"(H) slip pocket
One (1) 6"(L) x 8"(H) x 1.75"(W) zippered pocket
One (1) 6"(L) x 5'(H) internal mesh pocket
Internal key retention clip
Exterior rear
Breathable padding for comfort
Removable 1" webbing waist belt, with SRB closure
Exterior left
One (1) 7.5"(H) x 3.5" diameter cord cinch pouch with base-grommet for 32oz/1L water bottle or radio
1.5" x 5" hook and loop bottle retainer, with cinch cord
Exterior right
One (1) 3"(L) x 6"(H) x 1.5"(W) zippered pouch, with 2 rows / 2 channels PALS webbing
One (1) interior 3"(L) x 4.5"(H) slip divider
One (1) exterior 3" x 7" slip pocket
Exterior top
One (1) 7"(L) x 3"(W) x 1"(H) zippered pouch
One (1) 7"(L) x 2"(H) loop field for patches
Exterior bottom
3-channel 3/4" webbing daisy chain
Main interior front
One (1) 8"(L) x 6"(H) slip pocket
Main interior rear
One (1) 8"(L) x 6"(H) slip pocket
Straps
Fixed shoulder strap made from 2" webbing 33" min. adjustable to 48" max. length; with 2' non-slip shoulder pad, 2" quick release buckle and Keyper™ attachment point
Additional storage
9"(L) x 10"(H) concealed zippered compartment with internal 7"(L) x 8"(H) loop field for CCW
Other features
Grab handle made from 0.75" webbing
Cinch cord storm collar helps keep contents out of the weather
Removable waist strap
5-channel PALS webbing on right strap base for attaching other Maxpedition gear
#0413 JUMBO S-TYPE™ VERSIPACK® available for left side carry

Modello per mancini

Il FatBoy è molto più di un pratico zaino monospalla. E' lo stato dell'arte degli accessori e provvede ad un sicuro contenimento di tutti gli accessori e ad una rapida accessibilità all'equipaggiamento di uso quotidiano.

Il compartimento primario ha un'enorme capacità di 156 cu. in. ed è dotato di chiusure resistenti all'acqua. Ha inoltre molteplici ancoraggi esterni che permettono di ampliare il tutto con tasche ed accessori modulari opzionali.

Ogni FatBoy è accompagnato da un comodo spallaccio regolabile antiscivolo per garantire il massimo confort durante l'uso prolungato.

* Scomparto Principale: 6.5" (L) x 3" (W) x 8" (H)
* Tasca Frontale: 5" (L) x 1.5" (W) x 7" (H)
* Scomparto Posteriore: 8" (L) x 7.5" (W)
* Lato A (tasca con 2 file di attacchi): 3" (L) x 1.5" (W) x 6" (H)
* Lato B (fodero): 1.5" (L) x 1" (W) x 5" (H);
* Lato C (tasca per cellulare): 2.5" (L) x 1" (W) x 4" (H) con due portapenne
* Spallaccio : strap integrali da 2" antiscivolo.

- Battle Sword in a hand 501000 - battle ready

Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch

We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.

Each blade is built to withstand a lot of use by reenactors or stage performers.

Full tang sword forged of high carbon steel 1095, fully tempered.

The edges and points are 3/16" thick and rounded over for better nick resistance.

Wood grips covered with leather and other authentic materials.

All come with scabbards.

Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready

Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch

Museum Replicas Windlass - Gladiator - Tigris Axe 880011

From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.

Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.

Weight: 2014g.
wooden display support

© 2010 DW Studios LLC. All Rights Reserved.

Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.

Guard and pommel are made of steel.

Sheath, including the sword, a leather belt with.

- Overall length: 103cm

- Length of the blade: 86,5cm

- Blade width: 4.8 cm

- Weight: 1260 gr

Museum Replicas Windlass - Sword of Tancred - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.

- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.

Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios

Maxpedition - Octa Versipack Khaki MX455K pouch

Pouch Maxpedition Octa Versipack Khaki.

The main compartment measures 22.86cm x 12.7cm x 7.62cm, the front measuring 15.24cm x 12.7cm x 3.81cm.

The two side pockets measure 13.97cm x 10.16cm and 20.32cm x 10.16cm.

On the top there is a compartment for the trasporo a flashlight, waist measurement mt 1.22.

color desert

Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft

Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather

Description: Maxpedition SaberCat Versipack.

Una variante supersize del Versipack Proteus, con molte più funzioni.

Il vano principale misura 25.4cm x 17.78cm x 10.16cm,

il vano frontale misura 17.78cm x 17.78cm x 3.81cm, i vani laterali misurano 17.78cm x 10.16cm x 6.35cm.

Colore Khaki -

Maxpedition - Proteus Versipack Khaki - 0402K

TECHNICAL PRODUCTS MAXPEDITION

* 1000 denier ballistic nylon with water-resistant and abrasion
* Treatment DuPont Teflon Fabric Protector to make nylon resistant to dirt and dust
* YKK high strength
* Stress points double stitched together, triple, quad and in X
* UTX-Duraflex nylon buckles for maximum noiseless opening and closing
* Stitched with high tensile nylon
* Padding vulcanizates with polysulphide acid xantico Robac AS-100 to ensure maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and ropes made of military grade paracord

FEATURES PROTEUS

* Bag highly compartizzata with large capacity expansion by applying external accessories
* Main compartment of 20x15x10cm
* Overall dimensions of 38x18x9cm
* Can be used as a bag or pouch
* Full compatibility with accessories such SPRINGS

MAINTENANCE

* Pass a clean, damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergent or bleach
* Do not iron

Maxpedition E.D.C. Pocket Organizer bag 0246F

Maxpedition E.D.C. Pocket Organizer green leaf.

Compact Design.

Measuring 12.7cm x 17.78cm x 1.90cm.

It fits perfectly in the pocket of cargo pants or backpack / bag.

Full clamshell opening main compartment with double zipper.

Inside has a pocket on the left, a keychain and a elastic organizer with 9 compartments.

Inside has a pocket on the right, a hook and an elastic organizer with 6 compartments.

The exterior features a front mesh pocket with hook-and-loop closure.

At the rear it has a handle.

Maxpedition - FR-1 Combat Medical Pouch Foliage Green 0226F

The pockets of the Maxpedition FR-1 is definitely a more advanced version of the common pocket for first aid, thanks to the versatility afforded it.

It can be used as a normal bag or as a multi-purpose pocket for first aid kit.

Overall Dimensions: 7 "x 5" x 3 "with full zipper opening

Carrying handle

Front: 2 rows of MOLLE attachments, 2 loops 2.5 "each

Side frame: 2 rows of MOLLE attachments, 1 Loop

Equipped with D-Rings for attaching a shoulder strap (optional accessory, not included)

Compatible with hooks Tie Tac-5 "is not included, sold separately

The pocket opens to its full length, and inside there are many lanyards (paracord) with adjustable clips that allow you to adjust the maximum angle of opening.

On both halves (more inside) we find numerous elastic loops of various sizes that allow you to maintain balances objects placed inside it.

This pocket is also provided on the inside of a coupling in paracord, to which it is possible to hang various objects, such as a torch for example.

Material: Fabric Nylon / Cordura 1000 denier, rugged and water resistant.

Teflon protection: long-lasting protection against water stains or oil and dust.

Simple to clean, requires no special maintenance: Only clean using a damp cloth and allow to dry naturally. Do not machine wash. Do not use detergent or bleach.

Resistant YKK zippers.

UTX-Duraflex nylon buckles with silent closure.

Internal seams taped and finished.

Product Features

Maxpedition Condor II Hydration Backpack.la Condor II may contain more than 32L of tools. A detachable strap upper Y-shaped belts and four quick release side compression secure content and takes the strain hinges. Wide shoulder straps with high breathability support provides superb cooling characteristics. As with all Maxpedition backpacks, the bearing capacity can be expanded greatly with other modular pockets, added to the backpack on the front or side PALS attachment points using Malice clips. Hydration compartment is compatible with most of the systems of post-hydration. Color: Black

- Dimensions: 17.5 "(H) x 14" (W) x 6.5 "(D) Main Compartment
- 5.5 "(H) x 9" (W) x 2 "(D) Upper Front Pouch
- 8 "(H) x 9" (W) x 2.5 "(D) Lower Front Pouch
- Approximate Overall Capacity: 1950 cu. in. / 32 L
- Hydration: Fits up to 100 oz / 3L Reservoir (sold separately)
- Support: 1 "Sternum Strap, 1.5" Waist Strap (min 14 "strap alone / max 42" strap alone; min 28 "loop / max 56" loop)
- Optional accessories: Hook & Loop Modular Accessories and Grimloc Carabiner
- Empty Weight: 47.8 oz.

È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.

The Maxpedition Small Tactical Gear Retractor is a convenient key ring and retractable tool holder for maximum convenience of use. Made with a sturdy Kevlar cord 90cm long. is quick and convenient to use.

Features: Provides your keys and your tools in the best way, making them always ready to use cable with Kevlar than 90cm.

Resistance of Kevlar cord up to 24kg, tensile strength retractable cord 170g.

Easy to attach to belts or backpacks thanks to the attack Velcro Universal Quick to remove thanks to the fast-lock mechanism stainless steel interior Made entirely in the USA

Corpo e Testa: acciaio al carbonio, brunito
Impugnatura: cuoio nero
Dimensioni Testa: 75x75 mm.
Lunghezza Impugnatura: 200 mm.
Lunghezza Totale: 600 mm.
Spessore Corpo: 20 mm.
Peso: 792 g.

CARATTERISTICHE TECNICHE DEI PRODOTTI MAXPEDITION

* Nylon balistico da 1000 denari resistente all'acqua ed all'abrasione
* Trattamento DuPont Teflon Fabric Protector per rendere il Nylon resistente a sporcizia e polvere
* Cerniere YKK ad altissima resistenza
* Punti di stress uniti con cuciture doppie, triple, a quadrato ed X
* Fibbie in Nylon UTX-Duraflex per garantire la massima silenziosit di apertura e chiusura
* Cuciture in Nylon ad altissima resistenza alla trazione
* Imbottiture vulcanizzate con polisulfidi dell'acido xantico Robac AS-100 per garantire il massimo assorbimento agli urti
* Cuciture interne nastrate e vulcanizzate
* Coulisse e cordami realizzati in paracord di grado militare

CARATTERISTICHE BARON

* Borsa da viaggio o da palestra, di tipo cilindrico, per porto a mano o a tracolla
* Rispetta gli standard FAA per le linee aeree americane
* Capacit di 24.5 litri
* Compartimento principale di 56x25.5x23cm.
* Piena compatibilit con accessori di tipo M.O.L.L.E.

MANUTENZIONE

* Passare un panno pulito ed umido sulla superficie ed attendere che il prodotto si asciughi in modo naturale.
* Non lavare in lavatrice
* Non lavare a secco
* Non usare detergenti o candeggianti
* Non stirare

CARATTERISTICHE TECNICHE DEI PRODOTTI MAXPEDITION

* Nylon balistico da 1000 denari resistente all'acqua ed all'abrasione
* Trattamento DuPont Teflon Fabric Protector per rendere il Nylon resistente a sporcizia e polvere
* Cerniere YKK ad altissima resistenza
* Punti di stress uniti con cuciture doppie, triple, a quadrato ed X
* Fibbie in Nylon UTX-Duraflex per garantire la massima silenziosit di apertura e chiusura
* Cuciture in Nylon ad altissima resistenza alla trazione
* Imbottiture vulcanizzate con polisulfidi dell'acido xantico Robac AS-100 per garantire il massimo assorbimento agli urti
* Cuciture interne nastrate e vulcanizzate
* Coulisse e cordami realizzati in paracord di grado militare

CARATTERISTICHE VULTURE II

* Capacit di 46 litri
* Tre compartimenti utilizzabili
* Compartimento principale di 52x41x19 cm.
* Tasca frontale di 39x30x7 cm.
* Tasca esterna con cerniera di 39.30cm.
* Spallacci con allacciamento addizionale sul petto
* Piena compatibilit con accessori di tipo M.O.L.L.E.

MANUTENZIONE

* Passare un panno pulito ed umido sulla superficie ed attendere che il prodotto si asciughi in modo naturale.
* Non lavare in lavatrice
* Non lavare a secco
* Non usare detergenti o candeggianti
* Non stirare

Faithful reproduction of the helmet used by King Leonidas in the film "300".

Manufacturer: Windlass.

The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.

Dimensions: about 30 x 45 x 20 cm, crest included.

Elmo indossabile in acciaio lavorato a mano che riproduce fedelmente quello utilizzato da Russel Crowe ne "Il Gladiatore"

Ottima qualità e livello costruttivo

Incluso supporto in legno espositivo

Scudo tondo popolare tra il 13esimo ed il 17esimo secolo. Questo tipo di scudo era preferito da molti soldati a quelli più grandi perchè conferiva maggior rapidità di movimento pur sacrificando un poco di copertura.

Realizzato interamente in acciaio al carbonio, ha un diametro di 59cm. doppia impugnatura in cuoio e peso di circa 2500g.

Scudo prodotto dalla Windlass, tratto dal film di 300.

Materiali: lo scudo è fatto in acciaio con rivestimento placcato in rame.
La parte interna è rivestita in gommapiuma e munita di cinghie di cuoio per il trasporto.

Dimensioni: 94 cm
Peso: 9 kg