Last up date

Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s

Intended Use: Hunting

Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinued 

AdHoc - COOKING CULTURE

serving set From kitchen accessories to design items, the AdHoc range offers everything you need. Good taste is a necessity not only when cooking, but also when preparing and serving meals.

A perfect match for the COOKING CULTURE series of designer serving sets. The hallmark of the series is a fascinating combination of stainless steel and oiled ash wood. The functionality of the custom-made utensils is also exceptional, all 3 sets consist of 2 pieces:

1.RISOTTO SET : high-quality stainless steel cheese grater ash wood hearing rissotto spoon After use, the spoon slips into the grater brushed stainless steel / oiled ash wood

2.PASTA SET: high-quality stainless steel pasta ladle ash wood spoon after use, the spoon slides into the ladle brushed stainless steel/oiled ash wood

3. WOK SET: high quality stainless steel spoon oiled ash wood tongs after use, the tongs slide into the spoon brushed stainless steel/oiled ash wood

All sets fit into each other - which is convenient, saves space and shows the holistic approach to design. The best ingredients and the best tools for extraordinary taste - that's pure 'Cooking Culture'!

Bavarian dress knife or Bavarian picnic knife are the common English terms for the special type of fixed blade knife called Trachtenmesser in Germany. These knives are found in the right side pocket of a traditional Bavarian leather pant and only part of the handle is visible as you pass that pocket.

Bavarian dress knives are characterized by the particular shape of the blade and in most cases by a decorated ring. This ferrule constitutes the passage between the blade and the handle of the deer horn or other hunting trophies that is fixed with the tang. A dark brown leather sheath is slid over the blade for protection purposes.

Intended use: Hunting / Collection

Blade: 440 stainless steel
Handle: Deer
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 225mm.
Balancing: -
Weight: 109g.
Sheath: in leather

Intended use: Hunting / Collection

Blade: 440 stainless steel
Handle: Deer
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 225mm.
Balancing: -
Weight: 109g.
Sheath: in leather

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Germany
Blade: 440A stainless steel
Blade treatment: Satin finish
Handle: plum wood with brass guard and knob
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Balancing: set back
Weight: 248g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: USA
Handle: kryton
Blade length: 65mm.
Blade thickness: 4mm.
Length closed: -
Total length: 197mm.
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

H.R.T. Hostage Rescue Team

The Hostage Rescue Team (HRT) is the FBI's elite Special Operations tactical and counterterrorism SWAT Team. The HRT is trained to rescue US citizens who may be held illegally by hostile forces, either terrorist or criminal. Smith & Wesson has made a series of knives with this job in mind. The HRT knives are designed to meet the specific needs of these Military and Law Enforcement applications, and they mean business!

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: Use
Handle: aluminum
Blade length: 120mm.
Blade thickness: 4mm.
Length closed: -
Total length: 230mm.
Balancing: set back - 2cm. from the guard branch
Weight: 118g.
Closing: -
Clip: -
Sheath: leather
Note: late 90s production "

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: China
Handle: Zytel
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 175mm.
Weight: 42g.
Closing: -
Notes: whistle included in the sheath
Sheath: Kraton

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: China
Handle: rubber
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Total length: 235mm.
Balancing: -
Weight: 160g.
Closing: -
Note: -
Sheath: cordura

Intended use: sports

Type of production: industrial
Blade: full tang in 440B stainless steel
Blade treatment: -
Lama production: China
Handle: kryton
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Weight: 102g.
Closing: -
Clip: in steel
Sheath: -
Note: -

H.R.T. Hostage Rescue Team

The Hostage Rescue Team (HRT) is the FBI's elite Special Operations tactical and counterterrorism SWAT Team. The HRT is trained to rescue US citizens who may be held illegally by hostile forces, either terrorist or criminal. Smith & Wesson has made a series of knives with this job in mind. The HRT knives are designed to meet the specific needs of these Military and Law Enforcement applications, and they mean business!

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: USA
Handle: kryton
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: -
Total length: 210mm.
Balancing: set back - 2cm. from the guard branch
Weight: 112g.
Closing: -
Clip: -
Sheath: Kraton
Note: late 90s production "

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: -
Total length: 200mm.
Balancing: -
Weight: 76g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: -
Total length: 283mm.
Balancing: set back - 2cm. from the guard branch
Weight: 166g.
Closing: -
Clip: -
Sheath: Leather
Note:

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The smell of freshly ground coffee beans - simply wonderful!

The fragrance of freshly ground coffee beans – simply wonderful! And the invigorating specialities that confident coffee aficionados make out of them are even more delicious... AdHoc developed the MRS. BEAN coffee grinder so that grinding your favourite varieties is effortless. It works manually using an energy-efficient crank handle but otherwise has nothing to do with great-grandma’s old-fashioned hand grinder with its totally modern and very stylish look in elegant stainless steel and acrylic design. MRS. BEAN is equipped with a high-performance CeraCutXL® grinder that preserves the flavour and produces large amounts. With the help of the six PRECISE+® grinding settings on the outside, results can be achieved from powder fine to coarse according to your preference and depending on which preparation method you are going to use. The grinder container holds approx. 50 grams of coffee beans. The collection container is designed for approx. 25 grams (on setting 2) of coffee powder and can easily removed by unscrewing. As a result, you can enjoy technical features with MRS. BEAN that makes grinding coffee beans a real pleasure.

And the invigorating specialties that convinced coffee lovers prepare from them are even more delicious...

Adhoc has developed the MRS BEAN coffee grinder

so that grinding your favorite varieties is easy.

It works manually using an energy-saving hand crank, but is otherwise nothing like great-grandma's old hand mill, but with its sleek design of stainless steel and acacia wood it is thoroughly modern and very stylish. Ms. BEAN features the CeraCutXL ® high-performance coffee grinder for aroma-preserving grinding and high yield. With the help of the 6-fold PRECISE+ ® external grinding degree setting, results can be achieved at will, from powdery to coarse, depending on your preferred brewing method.

Filling is done by simply pulling out the grinding crank.

The grounds container holds about 50 grams of coffee beans.

After grinding, fresh ground coffee falls into the grounds container, which is designed for about 25 grams of ground coffee (with a grind of 2).

This amount is sufficient for up to 4 cups of coffee.

The collection container is easily removable; it is unscrewed by simply rotating it.

Approximate dimensions: diameter - 6 cm,

diameter with handle:14.6 cm,

height:21.8 cm.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Othello Solingen Germany by Anton Wingen - Bowie Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: craft
Blade: stainless steel 440
Production Blade: Germany
Handle: deer
Blade length: 160mm.
Blade Thickness: 6mm.
Length closed: -
Overall length: 295mm.
Balancing: -
Weight: 374g.
Closure: -
Clip: -
Sheath: Leather
Notes: vintage knives

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Sport

Blade: Stainless Steel Teflon 440A
Handle: G10
Blade length: 66mm.
Blade Thickness: 3.5mm.
Overall length: 153mm.
Length closed: -
Balancing: In the lower branch of the guard
Weight: 74g.
Closure: -
Clip: -
Sheath: From belt Kydex
Notes: -

Microtech DOC Black - Death on Contact - Flipper Knife - Knife

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony Marfione

Othello Solingen Germany by Anton Wingen - Original Trapper - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 12mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 162g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives.

Othello Solingen Germany by Anton Wingen - Safari 4412 Hunting Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 210g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - 4039 design by AG Russell - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 78mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 136g.
Closing: -
Clip: -
Sheath: Leather
Notes: design by A.G. Russell knives vintage

Othello Solingen Germany by Anton Wingen - Mackenzie 4094 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 226mm.
Balance: -
Weight: 192g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4082 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 140mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 268mm.
Balance: -
Weight: 242g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 14281 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 110mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 240mm.
Balance: -
Weight: 182g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4080 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Overall Length: 220mm.
Balance: -
Weight: 154g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany - Gesch 4079 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 85mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 180g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Intended Use: Collection, sports

Blade: carbon steel 1065
Production: France
Handle material: stainless steel
Blade length: 90mm.
Blade Thickness: 2mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 66g.
Closure: -
Clip: -
Sheath: -
Notes: -

Intended Use: Collection, sports

Blade: carbon steel 1065
Country of Production: France
Handle material: stainless steel
Blade length: 90mm.
Blade Thickness: 2mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 66g.
Closure: -
Clip: -
sheath:
Notes: -

Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachment

Mac Knives - Sub Tekno Titanium - knife

Intended use: Underwater

Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco Bellani

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco Bellani

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Destinazione d'uso: Collezione, sportivo

Lama: in acciaio al carbonio 1065
Produzione Lama Francia
Manicatura: acciaio inox
Lunghezza lama: 90mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 66g.
Chiusura: -
Clip: -
Fodero:
Note: -

Destinazione d'uso: Caccia/Collezione

Lama: Acciaio Inox 440C
Manicatura: Cervo
Lunghezza lama: 200mm.
Spessore della lama: 4mm.
Lunghezza totale: 325mm.
Bilanciatura: Avanzata, 1 cm. dal ramo di guardia
Peso: 360g.
Fodero: Da cintura, in cuoio

Intended use: Hunting / Collection

Blade: 440 58HRC Stainless Steel
Handle: Cocobolo wood
Blade length: 250mm.
Blade thickness: 4mm.
Total length: 390mm.
Length closed: -
Balancing: Advanced, 3cm. from the guard branch
Weight: 575g.
Closure: -
Clip: -
Sheath: From belt, in leather