Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.

- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC)
- Blade length: 11 cm long blade
- Total length: 25.5 cm
- Weight: 78 gr
- Sharpening: Smooth
- Handle: Composed of two wooden grips. Decorated with glossy black logo.
- Notes: no box, with vinyl case.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpening

The originality of the Home Line 200 lies in its innovative design: essentials and rounded lines define a nearly futuristic shape, exalted by the unmistakable red Berkel. Designed to impress and fascinate, but above all to be exhibited, its extraordinarily compact dimensions focus on materials and safety equipment and cutting quality inherited from the professional world.

Data sheet
- Cutting capacity (circular) 140 mm
- Dimensions up to 318x284x470 mm
- Engine power: 0.17 kW
- Cutting capacity (rectangular): 200 x 140h mm
- Blade diameter: 200 mm
- Weight: 12 Kg

light
The structure in a special aluminum alloy makes it particularly light but stable at the same time.

Home Line 200, A revolution in the world of electric slicers. It's the synthesis of Berkel engineer team know-how, functionality requirements, and high security standards. The Red Line 200 comes from Berkel's professional slicing technology and can guarantee unrivaled performance and safety levels: the chrome-plated steel blade with professional profile gives a perfect cut, reduces waste and ensures uniform slices.

The absence of edges and special equipment (such as the space for collecting small food leftovers and the plate that opens) make it extremely easy and quick to clean the machine.

Tradition meets innovation
The electric slicer with all the Berkel quality and professionalism and now innovative design. Reduced dimensions, ease of use and state of the art solutions ensure a perfect cut every day

For home use
RED LINE encompasses all the technology of professional Berkel meat slicers. This professional electric slicer for home use is elegant and lightweight and is made of a special aluminium alloy.
The steel blade ensures a perfect cut to make thin and even slices while reducing waste. The built-in sharpener enhances blade efficiency and durability. The slice deflector, blade cover, and meat table can be removed easily to ensure quick and accurate cleaning operations.
Red Line is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours.

Data sheet

- Cutting capacity (round) 178 mm
- Maximum size 650x520x450h mm footprint
- Engine performance: 0.17 kW
- Cutting capacity (rectangular): 185 x 175 mm
- Blade diameter: 250 mm
- Weight: 22 kg

Meat table removal
You can remove the meat table to clean it by simply moving the lever. Once you remove the meat table, the slicer automatically sets itself to safety mode and activates the CE lock. Putting the meat table back on unlocks the lever and makes the machine return to operating mode. An important innovation that allows the removal of the meat table with one swift movement and makes it easier to clean the slicer.

Blade cover removal
The blade cover is quick and easy to remove. All you have to do is rotate it by 90° and pull it out. This will make optimal cleaning an easy everyday task. Press the blade cover down gently to put it back into place ready for use.

Built-in sharpener
All Red Line slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position that does not require any adjustment, thereby ensuring the perfect angle for optimal sharpness.

Thickness adjustment knob
Red Line slicers are equipped with a built-in system that allows the gauge meat table to open up to 14 mm. The numbers on the adjustment knob refer to the actual thickness of the slice in millimetres. This allows for the highest precision in slice thickness adjustment (especially the thinnest and most common) with a the highest repeatability.

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade length: 26 cm
Total length: 41 cm
Weight: 126 gr
Sharpening: Smooth, toothless

Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

stand B2
The beauty deserves a pedestal.
A refined element which enhances the elegance of the historic slicer fly. The color of the pedestal is coupled to the slicer color choice. Some details could be different from what is shown in pictures

The Berkel Tribute flywheel slicer is a new slicer inspired by the historic Berkel B model (“Indianina”) of the ‘20s. A tribute to elegance and tradition for all those who use the machine intensely but like a sophisticated touch.

Technical data
Cutting capacity (round) 184 mm
Maximum slice thickness 3 mm
Cutting capacity (rectangular) 230 x 184h mm
Blade diameter 300 mm
Weight 60 Kg

The blade

The Tribute meat slicer has a 100cr6 steel blade with a 300 mm diameter and a 195 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener

The Tribute flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Top clamp locking/unlocking system

The double-column top clamp locking and unlocking device allows a perfect hold of the product on the meat table.

Blade protection device

Tribute is equipped with a protection device that covers the blade to ensure maximum safety while using or cleaning the machine.

Waste collection drawer

This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table and stainless steel tray

The Tribute flywheel slicers are equipped with an anodised aluminium meat table and a stainless steel tray, which ensure durability and wear-resistance.

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 11 cm
Total length: 25 cm
Weight: 95 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 10 cm
Overall length: 22.5 cm
Weight: 70 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 18 cm
Overall length: 30.5 cm
Weight: 170 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 18 cm
Overall length: 30.5 cm
Weight: 170 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The manual flywheel meat slicer for those who want to bring a touch of class to their homes and tables. Its elegance brightens up the room, its perfect cut is a celebration of flavours. All this in a compact little jewel.

FLYWHEEL B2, the flywheel meat slicer for home use
Berkel B2, the compact manual flywheel slicer faithful to tradition. The vintage meat slicer, manufactured the traditional way, remains a jewel of the past. A precious and elegant furnish. The pride of gourmet connoisseurs. Its structure is not too heavy, making it ideal for a professional but not intensive use.
B2 has a blade with a 265 mm diameter. It is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours. Its accessories include the pedestal and flower flywheel, which makes it even more precious.
Some details may be different from those shown in the photos.

Technical data
- Cutting capacity (round) 160 mm
- Maximum overall dimensions 715 x 520 x 580h mm
- Maximum slice thickness 2 mm
- Cutting capacity (rectangular) 190 x 150h mm
- Blade diameter 265 mm
- Weight 33 Kg

The blade
Flywheel B2 has a 100cr6 steel blade with a 265 mm diameter and a 150 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener
The B2 flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Blade protection device
Flywheel B2 is equipped with a protection device that covers the blade to ensure minimum safety requirements while using or cleaning the machine.

Waste collection drawer
This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table
The B2 flywheel slicers are equipped with an anodised aluminium meat table, which ensures durability and wear-resistance.

The manual flywheel meat slicer for those who want to bring a touch of class to their homes and tables. Its elegance brightens up the room, its perfect cut is a celebration of flavours. All this in a compact little jewel.

FLYWHEEL B2, the flywheel meat slicer for home use
Berkel B2, the compact manual flywheel slicer faithful to tradition. The vintage meat slicer, manufactured the traditional way, remains a jewel of the past. A precious and elegant furnish. The pride of gourmet connoisseurs. Its structure is not too heavy, making it ideal for a professional but not intensive use.
B2 has a blade with a 265 mm diameter. It is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours. Its accessories include the pedestal and flower flywheel, which makes it even more precious.
Some details may be different from those shown in the photos.

Technical data
- Cutting capacity (round) 160 mm
- Maximum overall dimensions 715 x 520 x 580h mm
- Maximum slice thickness 2 mm
- Cutting capacity (rectangular) 190 x 150h mm
- Blade diameter 265 mm
- Weight 33 Kg

The blade
Flywheel B2 has a 100cr6 steel blade with a 265 mm diameter and a 150 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener
The B2 flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Blade protection device
Flywheel B2 is equipped with a protection device that covers the blade to ensure minimum safety requirements while using or cleaning the machine.

Waste collection drawer
This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table
The B2 flywheel slicers are equipped with an anodised aluminium meat table, which ensures durability and wear-resistance.

Tradition meets innovation
The electric slicer with all the Berkel quality and professionalism and now innovative design. Reduced dimensions, ease of use and state of the art solutions ensure a perfect cut every day

For home use
RED LINE encompasses all the technology of professional Berkel meat slicers. This professional electric slicer for home use is elegant and lightweight and is made of a special aluminium alloy.
The steel blade ensures a perfect cut to make thin and even slices while reducing waste. The built-in sharpener enhances blade efficiency and durability. The slice deflector, blade cover, and meat table can be removed easily to ensure quick and accurate cleaning operations.
Red Line is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours.

Data sheet

- Cutting capacity (round) 170 mm
- Maximum size 650x520x450h mm footprint
- Engine performance: 0.17 kW
- Cutting capacity (rectangular): 185 x 160 mm
- Blade diameter: 220 mm
- Weight: 22 kg

Meat table removal
You can remove the meat table to clean it by simply moving the lever. Once you remove the meat table, the slicer automatically sets itself to safety mode and activates the CE lock. Putting the meat table back on unlocks the lever and makes the machine return to operating mode. An important innovation that allows the removal of the meat table with one swift movement and makes it easier to clean the slicer.

Blade cover removal
The blade cover is quick and easy to remove. All you have to do is rotate it by 90° and pull it out. This will make optimal cleaning an easy everyday task. Press the blade cover down gently to put it back into place ready for use.

Built-in sharpener
All Red Line slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position that does not require any adjustment, thereby ensuring the perfect angle for optimal sharpness.

Thickness adjustment knob
Red Line slicers are equipped with a built-in system that allows the gauge meat table to open up to 14 mm. The numbers on the adjustment knob refer to the actual thickness of the slice in millimetres. This allows for the highest precision in slice thickness adjustment (especially the thinnest and most common) with a the highest repeatability.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Flat

Wenger - Classic Duo 81 - 6.85.00 - Caran d'Ache pen + Wenger Executive 81 Red

Gift Box Wenger - Duo Classic Red 81
Red pen Caran d'Ache Wenger Executive 81 +

Wenger Executive 81 - Practical and sympathetic GP / key ring with red cheeks and 5 uses:

- blade
- Nail file
- scissors
- Keyring

Closed dimensions: length. 6.4mm / 6.5mm thickness
Blade length: 40mm

EnZo - PK 70 - CPM-S30V - Birch - 2902 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle: Birch Wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 82g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Zero
Notes: Collini Cutlery is the distributor for Italy Enzo knives

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Lama production: Finland
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 93mm.
Total length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 82g.
Closing: No blade lock - Rear retention spring
Clip: -
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Sharpening of the full flat type

Intended Use: Hunting/Sporting

Production type: Industrial
Country of Production: Finland
Blade: stainless steel CPM-S30V
Blade finish: satin finish
Handle: G10 Black
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Enzo Knives logos
Notes: -

EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - PK 70 - CPM-S30V - Carbon fiber - 2901 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle material: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 86g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening Flat type
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - Trapper 95 - O1 - Black Canvas Micarta - 2018 knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless O1
Treatment Blade: -
Handle: Black Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi

EnZo - Camper 125 - D2 - Black Canvas Micarta - 2083 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Blade: -
Handle: Black Micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - Camper 125 - D2 - Curly Birch - 2081 - knife

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Lama: -
Handle: Birch Burl
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 245mm.
Thick when closed: -
Balance: -
Weight: 160g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy of the knives Enzo

Intended Use: Hunting/Sporting

Production type: Industrial
Country of Production: Finland
Blade: D2 steel
Blade finish: Satin finish
Handle: birch briar
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 102g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpening

The simplicity of DROP STOP solves one of the most annoying inconveniences of pouring wine.
By rolling up the diskette and inserting it into the neck of the bottle, the thin wire of DROP STOP will perfectly cut the drop, so it won't soil the tablecloth.
Effective and 100 percent reusable Drop Stop is made of aluminum coated with food-grade PVC and therefore does not alter the taste of the wine.
Now the new drop stop also becomes an aerator,the wine can also breathe, in fact it oxygenates the wine releasing the aromas and enhancing the taste and allows it to be served without spilling drops.
The package includes 2 drop stops.