Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Use: Heavy Utility

Production Type: Semi-Industrial
Production Lama USA
Blade: full tang steel 1095 58 / 60HRC
Treatment Lama: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 213mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 353mm.
Thick when closed: -
Balancing: -
Weight: 510g.
Closing: -
Clip: -
Sheath: Nylon, ABS with insert in and outside pocket multifunction
Pack a bag transparent plastic
Note: Emergency whistle - Design by Andy Tran

Tops - Wolf Pup knife - knife

Intended Use: Tactical/Military

Type of production: semi-industrial
Blade: full-tang 1095 carbon steel
Lama USA production
Handle: Gray micarta with white spacers
Blade length: 55mm.
Blade thickness: 3.5mm.
Closed length: -mm.
Total length: 130mm.
Balancing: -
Weight: 106g.
Closure: -
Clips: -
Sheath: Kydex with multi-position clip
Note:

This is the strongest (thickest) knife we've ever made. The strength of this 3/8" thick piece of 5160 spring steel is impressive. It has a full handle, covered in tan burlap Micarta grips.

As the name suggests, the 'Lil Roughneck' is very similar to the tough dudes who do the hard, heavy work of oil rigs. The term Roughneck is now a commonly known term associated with rough and tough guys.

Roughnecks are strong-willed, hardworking, and keep on 'hanging in'. With that in mind... this is definitely a special knife for a special boy.

Knife Type: Fixed Blade
Total length: 15.88cm
Blade length: 6.99cm
Blade thickness: 0.965 cm
Blade shape: Hunter's tip
Blade steel: 5160 RC 56-58
Blade Finish: Black non-slip coating
Handle material: Tan canvas micarta
Knife weight: 289.17 g
Sheath Included: Yes
Sheath Material: Black Kydex
Sheath clip: Rotating spring steel
Designer: Leo Espinoza

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2015
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended Use: Tactical/Military/Survival

Country of production: USA
Type of production: semi-artisanal
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch
Weight: 585g.
Sheath: in kydex, tactical, with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, each knife has a serial number on the blade.

Intended Use: Tactical/Military/Survival

Type of production: Made in the USA, semi-crafted
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta RMT (Rocky Mountain Tread)
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch.
Weight: 595g.
Sheath: made of kydex, with double metal multi-position clip
Notes: Design by Tom Brown; used in the 2003 film "The Hunted / The Prey" starring Benicio Del Toro and Tommy Lee Jones

The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.


Intended Use: Tactical/Military

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth Brown

The original purpose of the Silent Hero knife was to provide a medium-sized tool for use by an interdiction unit specializing in fighting rhino poachers in Africa. It is an excellent design that has served many people on different continents. Over time, Anton (the designer) realized that he did not always need such a large knife strapped to his hip.

This is where the Silent Hero 4 was born. The handle and blade shape of the full-sized knife were perfect for a variety of tasks. By reducing them, you get a knife that is much easier to carry as an EDC, but still long enough to handle most cutting tasks. The appearance of this smaller version is basically the same, but there are some differences. The blade is a bit thinner, the finish is Sniper Gray Cerakote (instead of Black River Wash) and it comes with a Kydex sheath instead of leather. So if you are looking for a blade to match your Silent Hero or simply prefer a blade length of about 4" instead of 6", the new Silent Hero 4 will be an excellent addition to your collection!

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Cerakote Sniper Gray
Handle: Canvas Micarta
Blade length: 108mm.
Blade thickness: 3.4mm.
Total length: 225mm.
Balance: on the guard branch
Weight: 170g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Power Eagle 12 is a true force multiplier

For hundreds of years, people have survived by using machetes as a source of income, food, shelter and self-defense tool. TOPS designer Leo Espinoza has taken this tool, combined with a kukuri and a bolo, and enhanced it with highly flexible, impact-resistant steel. The bushcrafter, explorer, or outdoor expert can use it for long periods of time without much effort or fatigue, thanks to the extremely ergonomic, comfortable, and indestructible handle. 

Whether you use it to clear a trail, build a shelter, or for military or survival applications, this is definitely an important tool.

TOPS POWER EAGLE 12

Intended use: machete / heavy utility

Type of manufacture: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: Micarta
Blade length: 300mm.
Blade thickness: 6.3mm.
Total length: 448mm.
Balance: advanced
Weight: 740g.
Sheath: made of Nylon, simultaneously holds the Power Eagle and ALRT XL Tanto
Notes: -

TOPS ALRT XL TANTO

Intended use: light utility / neck knife 

Type of production: semi-industrial
Blade: full tang in 1095 carbon steel
Country of Production: USA
Handle: 1095 carbon steel
Blade length: 35mm.
Blade thickness: 4mm.
Total length: 135mm.
Weight: 89g.
Sheath: thermoplastic, for neck
Notes: -

The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.

After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.

We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistle 

The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.

Intended Use: Utility

Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticity

The C.U.B. (Compact Utility Blade) is designed to serve as a compact and lightweight sidekick to a machete/bolo/parang in a tropical environment or of a tomahawk/axe in a forest environment. It is capable of performing all the important utility functions for camp and food preparation, leaving the heavy lifting to the other cutting tools. With an emphasis on compactness, the C.U.B. was designed with two styles of knives in mind: the Finish Puukko (with scandi sharpening) and the Kephart. Put them in a blender and you get the C.U.B. TOPS: robust simplicity!

Intended Use: Utility

Type of Production: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Stonewashed
Handle: Canvas Micarta
Blade Length: 95mm.
Blade thickness: 3.5mm.
Total length: 203mm.
Weight: 148g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Small Survival Kit with tinder box, compass, rubber bands etc. - Each piece is numbered and accompanied by certificate of guarantee and authenticity

The Mission Team 21 is a no-nonsense tactical knife that can also easily carry out many activities in the field. The handle has been designed to remain in the operator's hand even in difficult situations thanks to the finger grooves, finger guard and jimping. If necessary, the knife can also be used in survival situations.

Created with the guidance of Bill Hill (Command Master Chief-Seal Team 3 retired with over 30 years of real-time experience), this design has produced a great field tool for any theater. Very nice aesthetically, feels good in the hand and always performs at its best.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 150 mm.
Blade thickness: 6mm.
Total length: 300 mm.
Balancing: on the guard branch
Weight: 487g.
Sheath: in cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle

Intended use: tactical / collection

Type of production: semi industrial
Blade: full tang in 1095 carbon steel
Production Lama: USA
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6mm.
Closed Length: -
Total length: 375mm.
Balance: advanced - 2.5cm. from the guard branch
Weight: 630g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended use: Collection / Survival

Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.

Intended Use: Bushcraft / Utility

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 172mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Weight: 430g.
Sheath: Nylon, for thighs, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

Intended Use: Bushcraft / Utility

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Black Traction Coating
Handle: Micarta
Blade Length: 146mm.
Blade thickness: 6.3mm.
Total length: 286mm.
Weight: 510g.
Sheath: Nylon, thigh length, with frontal pocket.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.

The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Ston wash and Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 274g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended Use: Tactical / Military

Production type: Semi-Industrial
Country of Production: USA
Blade: Full tang in 1095 58/60HRC steel
Blade Finish: Tactical Stone Coating
Handle: G-10
Blade Length: 89mm.
Blade thickness: 5mm.
Total length: 219mm.
Weight: 192g.
Sheath: Kydex sheath with metal belt clip rotatable 360° and tinder box included.
Package: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity.

The Fieldcraft Knife was designed by The Brothers of Bushcraft, a group of nature activity enthusiasts. From tracking, to building shelters, the Brothers of Bushcraft are committed to training and educating people of all ages and genders to the passion of bushcraft.

The Fieldcraft Knife is the result of their knowledge and experience gained in the field; through experiences in the vast and humid rainforests, the arid and scorpion-strewn deserts and the freezing northern lands that span the Americas.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 250mm.
Thick when closed: -
Weight: 278g.
Sheath: in Kydex with 360 ° rotatable metal belt clip and flintlock included
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Intended Use: Tactical/Military/Survival

Type of production: semi industrial
Blade: full tang in carbon steel 1095 58HRC
Blade finishing: Camouflage
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balance: Advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder.

Intended use: Bushcraft / Utility

Type of production: Semi-Industrial
Production Lama: USA
Blade: full tang in 1095 steel 58 / 60HRC
Blade treatment: Black Traction Coating
Handle: Micarta
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Thick when closed: -
Weight: 191g.
Sheath: in Kydex with 360 ° rotatable metal belt clip
Packaging: Transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of guarantee and authenticity

Tops - Tom Brown - The Tracker

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 595g.
Closure: -
Clip: -
Sheath: in kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: full tang in 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 345mm.
Balancing: advanced
Weight: 449g.
Sheath: Nylon
Notes: design by Laci Szabo

Intended use: Tactical / Survival / Heavy Utility

Type of production: semi-industrial
Blade: full tang, 1095 58HRC carbon steel
Blade finish: Black Traction Coating
Handle: Micarta
Blade length: 260mm.
Blade thickness: 6mm.
Total length: 425mm.
Balancing: advanced
Weight: 735g.
Sheath: Nylon
Notes: Design By Xtreme Survivalist & Adventurer EJ Snyder

Intended use: Tactical / Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in 1075 - 56 / 58HRC carbon steel
Blade treatment: Black Traction Coating
Handle: G10 Black
Blade length: 184mm.
Blade thickness: 7.8mm.
Total length: 318mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Design by Leo Espinoza

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: G10 Black
Blade length: 184 mm.
Blade thickness: 7.8mm.
Total length: 318 mm.
Balancing: on the guard branch
Weight: 695g.
Sheath: in kydex
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

The Operator 7 is huge! TOPS Knives went well with heavy steel and handles to make a hefty, well-balanced knife. It also has those classic American fighting knife aesthetics that make it look as good as it will perform.

Made out of 5/16 "thick 1075, the differentially heat-treated blade with a very strong thorn. The entire handle is also over 1 "thick once assembled to fill out the user's hand much like an ax or hatchet handle would.

Because it is a tool, it's got to be comfortable. It's made for the men that do not back down. This knife will find its place with door kickers, survivalists, and weekend warriors alike. The rounded handles and hand guards make it a joy to use and the finger choil allows the user great precision for finer cuts. The 6.5 "of cutting edge will help you get the work done." The included Kydex sheath with dangler attachment makes it easy to carry into whatever territory you find yourself.

Intended use: Hard Utility / Survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-154CM stainless steel 58 / 60HRC with cryogenic treatment
Blade finish: tumbled
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 931g.
Sheath: in thermoformed kydex with 360 ° rotating steel clips
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro

Intended use: hard utility / survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade finish: stone washed
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 408g.
Sheath: in leather
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro - Limited edition edition to celebrate the 20 years of production of the model - Each knife is numbered and accompanied by a certificate of guarantee and authenticity

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpening

Intended use: Heavy Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 56 / 58HRC
Blade treatment: Acid Rain
Handle: Green and Black Canvas Micarta
Blade length: 305mm.
Blade thickness: 6.4mm.
Total length: 445mm.
Balancing: Advanced
Weight: 835g.
Sheath: Kydex, with leather belt loop
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 240mm.
Blade thickness: 5mm.
Total length: 295mm.
Balancing: on the guard branch
Weight: 315g.
Sheath: in black leather
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Anton Du Plessis

The Silent Hero was designed by Anton Du Plessis, who is the Chief of Operations for the Specialized Interdiction Unit of the Silent Heroes Foundation. His task is to combat the poaching crisis in South Africa. This knife has to be durable, versatile, and able to fill Anton's needs in the field, which affected the design of the blade and the handle. It will definitely hold up to hard use. And with a weight of only 12 oz, you'll be able to use the knife without getting fatigued too quickly.

There is a lanyard hole in the handle along with another in the finger guard. This is meant to allow the user to add a safety cord in order to improve the grip on the handle, which already allows for a solid grip. The finger-guard hole can also be used to assist in lashing to a spear when the situation warrants it.

There is a finger choil up into the blade to give you the ability to choke up and execute precise, fine cuts. The drop point design makes this knife great for slicing and gives the tip extra strength. So this knife will be a great knife for bushcraft, survival, and tactical purposes.

The black leather sheath is durable and looks great paired with this knife. The Silent Hero is held in place with a single snap loop that curls around the finger guard.

The Silent Hero is a great design and a very versatile blade. It is large enough that it can be used to chop, but is also still small enough to complete most of the tasks you can do or want to do with a smaller knife.

TOPS Knives is a proud supporter and Corporate Sponsor of the Silent Heroes Foundation.

Intended use: Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: full tang in steel 1095 58 / 60HRC
Blade treatment: Black River Wash
Handle: Tan Canvas Micarta
Blade length: 120mm.
Blade thickness: 4.5mm.
Total length: 248mm.
Balancing: Set back
Weight: 270g.
Sheath: kydex, with vertical belt attachment
Packaging: Transparent plastic bag
Notes: Emergency whistle - Design by Leo Espinoza

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

Intended use: Sports

Type of production: Semi-Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Stonewashed
Handle: Black G10 with Cryptic design Cyber
Blade length: 82mm.
Blade thickness: 3.5mm.
Closed Length: 146mm.
Overall length: 194mm.
Weight: 76.5g.
Closing: Friction / Slip Joint
Sheath: leather with belt loop
Packaging: transparent plastic bag with warranty and authenticity certificate
Notes: Design by Leo Espinoza

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Flat

Use: Bushcraft / Utilities

Production Type: Semi-Industrial
Production Lama USA
Blade: Full tang 1095 steel 58 / 60HRC
Treatment Blade: Black Traction Coating
Handle: Green G10
Blade length: 120mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 250mm.
Thickness when folded: -
Balancing: -
Weight: 278g.
Closed: -
Clip: -
Sheath: Kydex with metal belt clip rotates 360 ° and flint included
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by a certificate of authenticity and warranty

Destinazione d'uso: Escursionismo / Caccia

Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: full tang in acciaio inox 440C 58/60HRC
Trattamento Lama: Bead Blast Finish
Manicatura: Antique White Micarta
Lunghezza lama: 83mm.
Spessore lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 324g.
Chiusura: -
Clip: -
Fodero: Cuoio Nero
Confezione: Busta plastica trasparente
Note: Ogni pezzo è numerato ed accompagnato da certificato di garanzia ed autenticità.