Last up date

Start hiking fire, usable about 3000 times, which generates sparks at 2980 ° C. It can also be used in cold and humid environments. This flint allows you to easily light fires in any weather situation and at any altitude. Wooden handle, high visibility paracord lanyard, firelighter in ferrocerio and stainless steel rubbing plate

Use
1) Remove the paint from the steel rod with the plate supplied or with a knife blade.
2) Slowly rub the plate supplied or the blade of the knife on the steel rod.
3) The sparks produced allow the ignition of stoves, barbecues, paper, dry grass and bark.

Instructions
1. Take a small amount of cotton, paper, straw or flammable material.
2. a) Grasp the FireSteel with one hand
2. b) Grasp the steel plate with the other hand
2. c) Place the tag on the FireSteel
3. Rub the plate slowly down while holding the FireSteel tightly

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black TiNi
Handle: aeronautical aluminum 6061-T6 Black TiNi
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closing: Sub FrameLock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearings

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Black Oxide
Handle: GRN (Glass Reinforced Nylon)
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 12.4mm.
Weight: 77g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment:
Handle: G10 and Carbon Fiber
Blade length: 70mm.
Blade thickness: 2.7mm.
Closed length: 103mm.
Total length: 171mm.
Thick when closed: 9.7mm.
Balancing: -
Weight: 54g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens Anso

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel
Blade treatment: Blackwash
Handle: Carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 84g.
Closing: Sub FrameLock
Clip: Removable and multi-position, in Teflon coated stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Sprint Run Edition - Carson Flipper type opening system on KVT ball bearings

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: G10 with steel folders
Blade length: 86mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 181mm.
Thick when closed: 16mm.
Weight: 75g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, with stonewashed treatment
Packaging: Cardboard box with Kershaw logos
Note:

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Satin
Handle: G10 and carbon fiber
Blade length: 76mm.
Blade thickness: 2.7mm.
Length closed: 102mm.
Total length: 175mm.
Thick when closed: 11mm.
Weight: 53.9g.
Opening: Carson Flipper system
Washers: Teflon, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable, reversible, deep pocket type
Packaging: Cardboard box with Kershaw logos
Notes: Design by Sinkevich

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Japan
Blade: stainless steel Aus-8
Blade treatment: Satin finish
Handle: Kraton
Blade length: 97mm.
Blade thickness: 3.4mm.
Length closed: 123mm.
Total length: 223mm.
Thick when closed: 22.5mm.
Weight: 140g.
Opening: two-handed, by grooving on a blade
Closure: Back Lock
Clip: -
Sheath: nylon, belt, with kershaw logo
Packaging: Cardboard box with Kershaw logos
Notes: knife in production until the 90s

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Japan
Blade: stainless steel Aus-8
Blade treatment: Satin finish
Handle: Kraton
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 182mm.
Thick when closed: 17.3mm.
Weight: 84g.
Opening: by grooving on a blade
Closure: Back Lock
Clip: -
Sheath: nylon, belt, with kershaw logo
Packaging: Cardboard box with Kershaw logos
Notes: knife in production until the 90s

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Handle: G10
Blade length: 83mm.
Blade thickness: 2.6mm.
Closed length: 108mm.
Total length: 184mm.
Thick when closed: 13.2mm.
Weight: 113g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Kershaw logos
Notes: Design by Sinkevich

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Blackwash
Handle: G10
Blade length: 76mm.
Blade thickness: 2.8mm.
Closed length: 108mm.
Total length: 184mm.
Thick when closed: 10.8mm.
Weight: 63g.
Opening: Carson Flipper system
Washers: in nylon, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens Anso

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Stonewashed
Handle: 6061-T6 anodised aeronautical aluminum
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closure: Sub FrameLock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Carson Flipper opening system

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black TiNi
Handle: Black TiNi and G10 3D stainless steel
Blade length: 8.3mm.
Blade thickness: 2.7mm.
Length closed: 111mm.
Total length: 191mm.
Thick when closed: 9.7mm.
Weight: 131g.
Opening: Carson Flipper and SpeedSafe system
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Note: -

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Blackwash
Grip: G10 and Carbon Fiber
Blade length: 70mm.
Blade thickness: 2.7mm.
Length closed: 103mm.
Total length: 171mm.
Thick when closed: 9.7mm.
Weight: 54g.
Opening: Carson Flipper system
Washers: brass, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens Anso

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. Emerson

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Tomahawk Full tang.

Type of production: Industrial
Production Lama: China
Blade: 3Cr13 Stainless Steel
Blade treatment: Painting
Handle: nylon reinforced with glass fiber - 24mm thick.
Head size: 210x100mm. - 100mm wire length
Blade thickness: 5.5mm.
Overall Length: 406mm
Thick when closed: -
Balancing: -
Weight: 918g.
Sheath: Nylon
Packaging: blister, with Kershaw logos
Notes: -

Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel with sharp 14C28N in CPM-D2
Blade treatment: -
Production Lama USA
Handle: G10
Blade length: 92mm.
Blade Thickness: 3mm.
Length closed: 125mm.
Overall length: 216mm.
Balancing: -
Weight: 165g.
Lock: Liner Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: opening by flipper