Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

Line of cutlery expressly designed for professional use: blades produced with special nitrogen NITRO-B steel (1.4916) and ergonomic handles in SEBS. The materials used are sterilisable, resistant to corrosion and high temperatures, and comply with current hygiene and food safety regulations.

Vasteness of assortment, safety of use, functionality of the shapes and excellent value for money make the knives of the Supra Line irreplaceable working tools for professional operators.

Sanelli Ambrogio - Supra - Spatwola cm. 42 2 hands

Francesco Elmi, Master Pastry Chef. Member of the Accademia Maestri Pasticcieri Italiani (A.M.P.I.) of the Ambasciatori Pasticcieri dell'Eccellenza Italiana (A.P.E.I.) is the inspirer of the two-handled spatula "SPATWOLA", a synthesis of technique and technology, created to work in standard 40x60 trays and perfect for spreading mousses, creams and icings.

The shape makes work easier and saves time without sacrificing quality! -This equipment is designed to work in standard 40x60 trays.

Thanks to its height and length dimensions as well as its flexibility, perfect for spreading mousses, creams and icings in silicone moulds.

The shape allows you to simplify your work, save time without sacrificing quality. -Technical data sheet

Model: SZ22 042 B 

Type: Spatulas 

Brand: Ambrogio Sanelli

LENGTH OF BLADE: 42 cm

MADE IN: Italy.

Sanelli Ambrogio - Ham Hand Cutting Set - 6 pieces - Kitchen Knives

Are you looking for an essential set of knives great for hand-cutting ham? -This set born from Sanelli Ambrogio's collaboration with Benedetto Colantuono is for YOU. -Benedetto Colantuono Master of Blades, qualified Cortador in Spain and perfected with famous cutters, has been working with leading producers of cured meats of excellence and has been practicing and teaching hand-cutting of raw ham for more than a decade.

His collaborations include: Cibus, Milano Golosa, Identità Golose, Masterpieces at the Table, Le Folies Berger in Paris, Host and some of the most important cooking schools .

THE 'ART OF CUTTING GOES THROUGH THE QUALITY OF THE BLADE :

THIS KIT REPRESENTS AN IDEAL SYNTHESIS TO ACHIEVE THE BEST RESULTS.

SET COLANTUONO by Ambrogio Sanelli consists of:

FRENCH KNIFE 24 cm SM99024B

ALVEOLATE BLADE SALMON KNIFE 32 cm SA56032B

ALVEULATED BLADE SALMON KNIFE STRAIGHT ALVEOLED 16 cm SD97.016B 

VEGETABLE KNIFE  7 cm ST91007B 

OVAL MICROFINE sharpening steel knife 30 cm 

GOURMET Pliers A1155.019 TRIANGLE 

The Chef's Tong is an increasingly popular tool in professional kitchens. 

This innovative line made of high-quality materials is durable and easy to clean and has the special feature of coloring according to HACCP regulations. 

The silicone inserts perform the dual function of improving grip and identifying different food categories with colors.

Thanks to this system, it is possible to use the tong safely and efficiently, avoiding cross-contamination between foods. 

Material: stainless steel

Size: 30 cm.

Dishwasher safe

The Chef's Tong is an increasingly popular tool in professional kitchens. 

This innovative line made of high-quality materials is durable and easy to clean and has the special feature of coloring according to HACCP regulations. 

The silicone inserts perform the dual function of improving grip and identifying different food categories with colors. Red is for raw meat.

Thanks to this system, it is possible to use the tong safely and efficiently, avoiding cross-contamination between foods. 

Material: stainless steel

Size: 30 cm.

Dishwasher safe

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Dress A Teddy

16 piece teddy bear and clothes icing & gum paste cutter set by Jem

16 piece sugarcraft set from Jem in South Africa interchangeable cutters for mummy, daddy and baby bears, bear faces plus clothes, pram, parasol, hats etc

- dress them any way you like

- food approved plastic

-  packed with instructions

- fine for sugarpaste icing, but even better with gum paste and flower modelling paste.

JEM - Baby-Nursery-themed sugarpaste cutters set - CAKE DESIGN - PROMO

Create delicious decorative designs with fondant or gum paste using these plastic cutters. Set includes: - 12 sugarcraft cutters. - 9 cutters: 2 baby, bottle, dummy, rocker, booties, bib, rattle, pram and baby face This wonderful set consists of a variety of different sitting babies, plus standing and crawling babies. It also has a variety of accessories i.e. nappy, babygrow, flower fairy dress, chef's hat, fairy party .

The cutters are made from plastic and come with instructions.

Perfect for christening, baby parties and first birthday cakes as well as fairy fantasy cakes.

Suitable for creating toppers on cakes and sides using gum paste

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Made in Italy - XFETTA Truffle slicer By Sanelli-Oldani

XFETTA The one and only one-piece truffle slicer with incredible cutting performances. Thanks to FIXED BLADE you don’t have to worry about regulating the cutting thickness, since it’s always constant for every slice of your truffle.

DESIGN & TASTE XFETTA is an innovative tool, performant, effective, designed and engineered to enhance truffle excellence and exploit its taste in the best possible way. The outstanding design with the asymmetrical handle and its special sharpening grants a clean and immediate cut, always constant and ideal for the Truffle, that is then never wasted.

XFETTA took its unique shape after these two thoughts: the fixed blade, unique feature allowing to overcome the problem of cutting regulation, obtaining a constant and thin truffle slice, is both a manufacturing challenge and a cooking innovation, expression of the important partnership between the Chef and the Manufacturer.

XFETTA took its unique shape after these two thoughts: the fixed blade, unique feature allowing to overcome the problem of cutting regulation, obtaining a constant and thin truffle slice, is both a manufacturing challenge and a cooking innovation, expression of the important partnership between the Chef and the Manufacturer.

XFETTA is made with Nitro-B, a special steel specifically developed to achieve highly effective cutting performances. Thanks to the addition of nitrogen combined with an attentive and particular heat treatment, this special steel reaches high hardness, ensuring an excellent sharpening power and constant cutting performance over time.

XFETTA took its unique shape after these two thoughts: the fixed blade, unique feature allowing to overcome the problem of cutting regulation, obtaining a constant and thin truffle slice, is both a manufacturing challenge and a cooking innovation, expression of the important partnership between the Chef and the Manufacturer.

XFETTA is made with Nitro-B, a special steel specifically developed to achieve highly effective cutting performances. Thanks to the addition of nitrogen combined with an attentive and particular heat treatment, this special steel reaches high hardness, ensuring an excellent sharpening power and constant cutting performance over time. Keep the product away from humidity, avoid shocks and accidental falls, store it carefully using the protective band. Wash only with water and fully dry carefully, do not leave it wet; apply the protective band only when the product is perfectly dry. The product can be re-sharpened only by the manufacturer.

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

American scimitar knife by Sanelli Ambrigio, for trimming and slicing meat before the barbecue. Belongs to a professional line of cutlery, designed for trimming and processing meat.

The blades of the narrow-bladed scimitar knife are made from nitro B nitrogen steel, and the polished finish allows for better meat processing.

The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.

Intended Use: Barbecue

Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 260mm.
Total length: 385mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

THE BLADE is made of special NitroB nitrogen steel by Ambrogio Sanelli, and their semi-gloss finish allows for better meat processing.

THE HANDLE is specially designed with materials and finishes with high non-slip grip and mechanical resitence for a firm grip during this type of cutting.

USE
Suitable for cutting large slices of meat.

Everything, boxes included, 100% made in Italy.

Intended Use: Barbecue

Type of production: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 310mm.
Total length: 435mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

American scimitar knife by Sanelli Ambrigio, for trimming and slicing meat before the barbecue. Belongs to a professional line of cutlery, designed for trimming and processing meat.

The blades of the narrow-bladed scimitar knife are made from nitro B nitrogen steel, and the polished finish allows for better meat processing.

The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.

Intended Use: Barbecue

Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 260mm.
Total length: 385mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

Sanelli Ambrogio - Chef's tongs 30 cm - 1150.030

Stainless steel chef's tongs, useful for checking food cooking and making it easier to grip.

Technical characteristics.

Material: stainless steel

Dimensions: 30 cm.

Dishwasher safe

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

American scimitar knife by Sanelli Ambrogio, for trimming and slicing meat before the barbecue. Belongs to a professional line of cutlery, designed for trimming and processing meat.

The blades of the wide-bladed scimitar knife are made from nitro nitrogen B steel, and the polished finish allows for better meat processing.

The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.

Intended Use: Barbecue

Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 310mm.
Total length: 435mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

Professional churrasco knife by Sanelli Ambrogio for trimming and slicing meat before the barbecue. Belongs to a professional line of cutlery, designed for trimming and processing meat.

The knife's blade is produced with nitro nitrogen B steel, and the polished finish allows for better meat processing.

The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.

Intended Use: Barbecue

Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 200mm.
Total length: 325mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Intended use: Military

Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -

Sanelli Ambrogio's toothed carving knife for shredding, chopping, slicing and dicing meat before barbecuing. Belongs to a professional line of cutlery designed for cutting and processing meat.

The blade of the serrated knife is manufactured from nitro nitrogen B steel, and the polished finish allows for better meat processing.

The handle has an excellent grip between blade and handle, the latter non-slip polypropylene provides perfect ergonomics and a firm grip during cutting.

Intended Use: Barbecue

Production type: Industrial
Country of production: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin
Handle: Plastic polymer
Blade length: 200mm.
Total length: 325mm.
Packaging: Exposed plastic blister
Notes: Dishwasher safe

JEM - Set sugarpaste cutters flowers and fruit theme - CAKE DESIGN - PROMO

Flowers are a symbol of love, beauty, joy and romance, and what better way to enjoy them than in sugar?

Sugar roses can be so realistic that they will mystify even the most experienced florist. Made from gum paste and petal powder, roses can come to life and become the perfect addition to any beautifully decorated cake, from a wedding cake to a birthday or anniversary cake. As well as the rose cutter in this set you will also find other flower and fruit themed cutter sets to create other beautiful arrangements.

Includes an Easy Rose Cutter measuring 80mm in diameter. The petals are marked with the suggested sequence in which the petals should be assembled to make the rose. The cutters are also all marked with the cone size needed to make the centre of the flower.

A 2-piece set of mini flower cutters measuring approximately 10mm. each in diameter. a 2-piece set of 12 flower and fruit themed pastry cutters measuring approximately 20-25mm. in diameter each. Complete instructions and diagrams are also included. Colour: N/A Material: Plastic Shape.

Flower and Fruit Size: 10mm. to 80mm. Theme: Floral Type: Edge cutters for sugar paste, gum paste, clay These pastry cutter sets are easily assembled to create beautiful flower arrangements or fruit decorations that are perfect to complement any cake decorated with sugarpaste or gum paste.

SLICER- MADE IN ITALY

Essential accessory in the kitchen, tagliatutto (vegetables, fruit, cheese, mushrooms, truffles and more) with edge blade razor in stainless steel, equipped with a screw capable of adjusting the height of cut.

Structure in stainless steel.

Features:
- Blade length: 5.6 cm
- Total length 17.5 cm total
- Cut into slices mm. 0.2 to 2 mm, 5.

Line of cutlery expressly designed for professional use: blades produced with special nitrogen steel NITRO-B (1.4916) and ergonomic handles in SEBS. The materials used are sterilisable, resistant to corrosion and high temperatures, and comply with current hygiene and food safety regulations.

A wide range of products, safe to use, functional shapes and excellent value for money make Supra knives irreplaceable working tools for professional operators.

Sanelli Ambrogio - Supra line frozen food knife

The Sanelli Ambrogio frozen food and ice knife cm 26 is a product with an almost unbeatable quality/price ratio.

FEATURES This product is equipped with a satin-finished blade made of Bonpertuis® special nitrogen stainless steel, whose adherence to the handle is total, so as to ensure maximum hygiene; speaking of the blade, its length is 26 cm. Hand-sharpened, the Sanelli Ambrogio frozen food and ice knife has a non-toxic, non-slip, ergonomic and abrasion-resistant handle. The laser marking of the logo is precise and indelible. Another prerogative of the knife is that it is made with a special serration, double for precision; the material it is made of makes it dishwasher safe, with a black TPE elastomer handle.

USE The frozen food and ice knife is ideal for cutting frozen meat, fish and vegetables; it is also suitable for working with, bevelling and breaking up ice cubes to fit your glass.