Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Felco - Tie-rod cutting saw - 621 cm. 24.
Felco 621 saw enables clean and precise cuts of large diameter.
Reliability:
chromed stainless blade made of high quality tempered steel
heat treatment by pulse of the tooth tips
clean and precise cut

Effectiveness:
conical blade shape for stumble-free cutting
the shape and arrangement of the teeth prevent soiling of the blade
no maintenance required

Ergonomics:
comfortable handle
anti-derapant
left- or right-handed pouch with detachable belt loop.
Blade length: 240 mm
Total length: 420 mm ( 16.5 in )
Weight: 305 g ( 10.8 oz)

Sanelli Ambrogio - Ham Press - IBERICO

FEATURES:

Ham holder manufactured in SPAIN with top quality Chilean pine wood .

The fittings and tips are made of steel with a polished chrome surface finish .

The design of the Ham Holder allows us to position the ham to our liking thanks to the practicality of its balancing system , obtaining an easy and comfortable cut to best enhance the Ham .

The ham is fixed by means of 4 knobs , achieving a secure and perfect anchoring of the ham.

To prevent the ham holder from moving , they have equipped it with 4 non-slip silicone feet .

Made of wenge lacquered pine wood

Luxury stainless steel ham holder.

Made of lacquered pine wood.

LxW: cm 50 x cm 21

H total cm 26

H base cm 3.

Weight: 3.80 kg.

Sanelli Ambrogio - XFETTA Truffle Slicer Set by Davide Oldani with glove-base-brush

XFETTA was born from a reflection that has to do with the excellence of a product, with the precision of a 'gesture', and with the 'rule' 

Chef Davide Oldani What distinguishes our company is passion: an engine that drives us to transform the impossible into reality, even in the face of great obstacles 

Ambrogio Sanelli XFETTA Damasco Limited Edition is the innovative truffle cutter with a fixed blade, which makes it possible to obviate the problem of adjusting the cut by obtaining a constant, thin blade that is always perfect. Country of Production: Italy Blade dimensions: 8cm. Mandoline Dimensions: 25 x 11cm.

Material: Nitro-B stainless steel Maintenance: Wash with water only and dry thoroughly. Can only be resharpened by contacting the manufacturer.

Note: Developed in collaboration with Chef Davide Oldani

The new gift set includes:  in addition to XFETTA, truffle glove, brush and walnut base. Ideal complement to the now iconic fixed-blade truffle slicer.

TRUFFLE GLOVE / TRUFFLE GLOVE. Ideal truffle glove, with additional protection on 3 fingers, ideal companion to XFETTA.

In single box. 

Truffle brush, FSC-certified beechwood frame - bristles  made of 100% natural Tampico fibres

Dimensions: 9 x 5 cm.

The meat needle is an indispensable kitchen accessory, perfect for tying and preparing meat such as poultry, turkey or roast pork. 
Thanks to its length, it allows you to work on even large pieces of meat, helping them to keep their shape during cooking. 
Made of high-quality stainless steel, it is rust-resistant, does not retain odours and is robust for frequent use.
The sharp end makes it easy to skewer meat, while the wide loop allows the use of any type of kitchen string.
The advantage of this needle is that it binds the meat securely, allowing it to cook evenly and retain the juices inside, improving the flavour of the dish.

Length: 24cm 

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

XFETTA was born from a reflection that has to do with the excellence of a product, with the precision of a "gesture", and with the "rule" - Chef Davide Oldani

What distinguishes our company is passion: an engine capable of pushing us to want to transform the impossible into reality, even in spite of great obstacles - Ambrogio Sanelli

XFETTA Damasco Limited Edition is the innovative truffle cutter with fixed blade, which allows to overcome the problem of adjusting the cut, obtaining a constant and thin flake that is always perfect.

Made of Damasteel DS93XTM, sintered Damascus stainless steel produced starting from two alloys of different grades, RWL34TM and PMC27TM. Damask is a type of material with millennia of history and incomparable cutting performance, to make XFETTA a technical and aesthetic work of art.

Country of Production: Italy
Blade size: 8cm.
Mandolin dimensions: 25 x 11cm.
Material: Damascus stainless steel DS93XTM by Damasteel
Support: Pedestal in real Carrara marble
Maintenance: We recommend that you keep the product away from moisture and always use the protective band provided once use is finished. Wash with water only and dry thoroughly. Regrindable only by contacting the manufacturer.
Notes: Limited edition edition made in only 50 numbered pieces - Developed in collaboration with Chef Davide Oldani

The thought of Chef Davide Oldani:
While we are slicing a fresh truffle today let's look at it; we fix the wheel, adjust the spring and then cut. This causes obvious differences between the thickness of the slats and an approximation that ends up penalizing a very valuable product. The XFETTA truffle slicer consists of a single piece according to the logic of less is more that characterizes many of my choices; it cuts slices all of the same thickness, because precision is one of the characteristics that contribute to making dishes as repeatable as possible in taste, taking into account the climate and season variables.

I chose the name XFETTA to convey two concepts: The first is that the slice has an ideal thickness and is therefore ideally “perfect” to enhance the truffle and its unmistakable scent; the second is that each slice is perfectly equal to the other. And even if we read "ICSFETTA", the meaning of all equal slices would multiply ... infinitely. I decided to write XFETTA and not Perfetta so that even the name is as slender as the object it represents and that was born - like all my design projects - from the daily observation of the guest and the kitchen, harmonizing simplicity, functionality and essentiality.

To engineer and realize this product in the best possible way and guarantee a high quality level, I entrusted myself to Ambrogio Sanelli and his company that has been dealing with this kind of objects since 1864 in Premana (Lecco). The choice of the best steels and the design of cutting-edge technical solutions are fundamental for them, taking advantage of a combination of tradition and craftsmanship quality and technological innovation. The exceptional design of XFETTA - challenging and difficult to manufacture - with asymmetrical handle and special sharpening, makes it possible to make a clean and immediate cut with unrivaled freedom of movement.
Invia commenti
Cronologia
Salvate
Community

Felco - Garden Shears - Model 400

Pruning Shears Garden
Suitable for professional and private use, scissors Felco pruners are used and recommended by professionals in more than 80 countries
Each scissor is regulated and tested by hand

TECHNICAL INFORMATION

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and riveted anvil high-quality hardened steel / clean, precise cut / all parts can be replaced

Effectiveness: easy cutting adjustment / wire cutters / sap groove

Ergonomics: non-slip coating

RECOMMENDED

Our advice
(* 1: Recommended, 2 **: Strongly recommended, 3 ***: Best fit)

Viticulture: **
Arboriculture: **
Horticulture: *
Parks and gardens **
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left: *

TECHNICAL SPECIFICATIONS

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and screw-mounted high-quality hardened steel / clean, precise cut / all parts can be replaced
Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
Ergonomic: hand protection, wrist and optimization of efforts by the ideal shape of the handles, the angled head and the cushion-shock absorber / non-slip coating

Our advice
(1: * Recommended, 2: ** Strongly recommended, 3: *** Best fit)

Viticulture: ***
Arboriculture: ***
Horticulture: **
Parks and gardens ***
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left:

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

fine adjustment
The adjusting device of FELCO guarantees throughout the life of an optimal adjustment of the cutting head, allowing for a clean and precise cut.

Cushioning system
The sash and reduce the shock impact at the end of the cut, protecting hand and wrist.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

Reliable: comfortable handles, light, sturdy forged aluminum with a lifetime guarantee * / blade and screw-mounted high-quality hardened steel / clean, precise cut / all parts can be replaced
Efficient: easy, durable cutting adjustment / wire cutting notch / sap groove
Ergonomic: hand protection, wrist and optimization of efforts by the ideal shape of the handles, the angled head and the cushion-shock absorber / non-slip coating

Our advice
(1: * Recommended, 2: ** Strongly recommended, 3: *** Best fit)

Viticulture: ***
Arboriculture: ***
Horticulture: **
Parks and gardens ***
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left:

wire cutting
The blades have a notch for cutting small diameter wire without damaging the cutting edge.

Sap groove
The dry blade allows you to cut vegetables, without the risk of gluing the blade. It saves time and makes pruning easier by removing sap and dirt after each cut.

fine adjustment
The adjusting device of FELCO guarantees throughout the life of an optimal adjustment of the cutting head, allowing for a clean and precise cut.

Cushioning system
The sash and reduce the shock impact at the end of the cut, protecting hand and wrist.

Forged aluminum handles
Lightness, strength and rigidity due to an aluminum alloy and the process of shaping the material with precision molding perfectly controlled by FELCO. Parts with a lifetime guarantee *.

To ensure perfect cutting, Collini Cutlery with his lab sharpening internal controls and audits each instrument sold.

Felco - Essentiel garden shears FELCO 160L

Felco - garden shears "Essentiel.

TECHNICAL INFORMATION

Reliable: comfortable handles, light, sturdy, high-strength composite fiber / blade and anvil blade of high-quality hardened steel / clean, precise cut / all parts can be replaced
Efficient: easy, durable cutting
Ergonomic: hand and wrist protection by the ideal shape of the handles / coating pleasant to the touch

Our advice

(1: Recommended, 2: Strongly recommended, 3: Best fit)

Viticulture: *
Arboriculture: *
Horticulture: **
Parks and gardens *
Nursery: *
Small hand:
Hand average: *
Large hand: ***
Left:

TECHNICAL SPECIFICATIONS

Handle in composite materials
High resistance polymer loaded fiberglass.

Angled cutting head
To reduce the risk of musculoskeletal disorders and increase the ease of use, the cutting head is tilted.

Blade length: 25 mm (1 in)
Total length: 220 mm (8.7 in)
Weight: 190 g (6.7 oz)
Included nylon sheath for transport, equipped with steel clip for attaching to your belt.