Last up date

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

High quality strop for maintenance of razors, knives and gouges.

On the side is the Classic Leather (20 x 4 cm, thickness 2.5 mm) and on the darker a bit more raw leather (20 x 4 cm, thickness 2.5 mm) to use when using the classic one is no longer enough .

The strop is not adjustable, but thanks to the spaces inside the wooden structure and the red felt inserts are ensured flexibility ..

Dimensions (including handle) 31.5 x 3 x 4 cm, 120 gr weight.

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

- Battle Sword in a hand 501000 - battle ready

Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch

We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.

Each blade is built to withstand a lot of use by reenactors or stage performers.

Full tang sword forged of high carbon steel 1095, fully tempered.

The edges and points are 3/16" thick and rounded over for better nick resistance.

Wood grips covered with leather and other authentic materials.

All come with scabbards.

Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready

Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch

Strop belt Extra Large, to straight razor, the German Dovo. Historical company of Solingen, specialized in the manufacture of cutting tools of high and very high quality.

Handle: leather
Strop: high-grade leather (leather back)
Strop Length: 39cm useful (7,8cm height - 3 mm thick)
Overall Length: 57.5 cm (hooks included)

Museum Replicas Windlass - Gladiator - Tigris Axe 880011

From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.

Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.

Weight: 2014g.
wooden display support

© 2010 DW Studios LLC. All Rights Reserved.

The smell of freshly ground coffee beans - simply wonderful!

The fragrance of freshly ground coffee beans – simply wonderful! And the invigorating specialities that confident coffee aficionados make out of them are even more delicious... AdHoc developed the MRS. BEAN coffee grinder so that grinding your favourite varieties is effortless. It works manually using an energy-efficient crank handle but otherwise has nothing to do with great-grandma’s old-fashioned hand grinder with its totally modern and very stylish look in elegant stainless steel and acrylic design. MRS. BEAN is equipped with a high-performance CeraCutXL® grinder that preserves the flavour and produces large amounts. With the help of the six PRECISE+® grinding settings on the outside, results can be achieved from powder fine to coarse according to your preference and depending on which preparation method you are going to use. The grinder container holds approx. 50 grams of coffee beans. The collection container is designed for approx. 25 grams (on setting 2) of coffee powder and can easily removed by unscrewing. As a result, you can enjoy technical features with MRS. BEAN that makes grinding coffee beans a real pleasure.

And the invigorating specialties that convinced coffee lovers prepare from them are even more delicious...

Adhoc has developed the MRS BEAN coffee grinder

so that grinding your favorite varieties is easy.

It works manually using an energy-saving hand crank, but is otherwise nothing like great-grandma's old hand mill, but with its sleek design of stainless steel and acacia wood it is thoroughly modern and very stylish. Ms. BEAN features the CeraCutXL ® high-performance coffee grinder for aroma-preserving grinding and high yield. With the help of the 6-fold PRECISE+ ® external grinding degree setting, results can be achieved at will, from powdery to coarse, depending on your preferred brewing method.

Filling is done by simply pulling out the grinding crank.

The grounds container holds about 50 grams of coffee beans.

After grinding, fresh ground coffee falls into the grounds container, which is designed for about 25 grams of ground coffee (with a grind of 2).

This amount is sufficient for up to 4 cups of coffee.

The collection container is easily removable; it is unscrewed by simply rotating it.

Approximate dimensions: diameter - 6 cm,

diameter with handle:14.6 cm,

height:21.8 cm.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Mini Trapper Santa Fe 'Turquoise - craft knife

Intended Use: sports / collection

Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Trapper Nacre 00640 - knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -

Case Cutlery - Trapper John Deere Green - 05862 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -

Trapper Dark Red - CA00646 knife

Intended Use: sports / collection

Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -

Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.

Guard and pommel are made of steel.

Sheath, including the sword, a leather belt with.

- Overall length: 103cm

- Length of the blade: 86,5cm

- Blade width: 4.8 cm

- Weight: 1260 gr

Museum Replicas Windlass - Sword of Tancred - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.

- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.

Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft

Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Microtech DOC Black - Death on Contact - Flipper Knife - Knife

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony Marfione

Corpo e Testa: acciaio al carbonio, brunito
Impugnatura: cuoio nero
Dimensioni Testa: 75x75 mm.
Lunghezza Impugnatura: 200 mm.
Lunghezza Totale: 600 mm.
Spessore Corpo: 20 mm.
Peso: 792 g.

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello realizzato dalla ditta americana Case negli anni 90

Produttore: Case - USA
lunghezza totale aperto: 24 cm
lunghezza lama: 10,5 cm
peso: 160 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma
note: fodero nero in Nylon

W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.

Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.

J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.

All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA.  Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis. 

Coltello vintage prodotto dalla ditta americana Case nel 1991

Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon

American Bowie Hunter 19USA92 - knife

Intended Use: Sport / collection / Hunting

Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case

Faithful reproduction of the helmet used by King Leonidas in the film "300".

Manufacturer: Windlass.

The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.

Dimensions: about 30 x 45 x 20 cm, crest included.

Elmo indossabile in acciaio lavorato a mano che riproduce fedelmente quello utilizzato da Russel Crowe ne "Il Gladiatore"

Ottima qualità e livello costruttivo

Incluso supporto in legno espositivo

Scudo tondo popolare tra il 13esimo ed il 17esimo secolo. Questo tipo di scudo era preferito da molti soldati a quelli più grandi perchè conferiva maggior rapidità di movimento pur sacrificando un poco di copertura.

Realizzato interamente in acciaio al carbonio, ha un diametro di 59cm. doppia impugnatura in cuoio e peso di circa 2500g.

Scudo prodotto dalla Windlass, tratto dal film di 300.

Materiali: lo scudo è fatto in acciaio con rivestimento placcato in rame.
La parte interna è rivestita in gommapiuma e munita di cinghie di cuoio per il trasporto.

Dimensioni: 94 cm
Peso: 9 kg

Replica della spada n. IV-1787 presente nella Reale Armeria d'Inghilterra.
Ben bilanciata e relativamente leggera, consente un brandeggio abbastanza rapido nonostante l'indubbia imponenza.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 111.5cm.
Spessore lama: max 4.6mm.
Lunghezza Totale: 145.5cm.
Peso: 2050g.
Bilanciamento:9 cm dalla guardia