Last up date

For easy cutting vegetable garlands of 6 cm width.

For best results set the cutter on its foot and position it with one hand. Use the other hand to stick fruit and vegetable into the cone.

Start rotating.

An end holder helps to process the end pieces for minimum loss.

Hard plastic and stainless steel, 10 x 8,5 x 9 cm, cone Ø 7,5 cm, hardened stainless steel blade, dishwasher-safe.

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

Triangle - Stainless steel quenelle spoon cm 3X20,5

NOVELTY! 

Quenelle or nocken transform any cream or mass into a visual and culinary delight, taking decorative serving and portioning to the next level.

Quenelle line spoons by Triangle are available in two sizes.

The short handle is suitable for ergonomic work from the wrist.

The long handle is suitable for working in deep containers.

The GreenGrip, used for the handles of the Spirit series, is made of 98% bio-based plastic with 40% wood.

There are no limits to your creativity!

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro block

The handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.

The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.

To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade

Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro block

The handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.

The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.

Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: Collini Steel

Old Bear ™ is the new and exclusive line of pocket knives produced by Antonini from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is made using traditional production techniques with a high level of manual skills.

Type of production: semi artisanal
Country of production: Italy
Blade: 420 stainless steel 54/56 HRC
Handle: in American walnut wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed length: 115mm.
Thick when closed: 22mm.
Total length: 175mm.
Weight: 55g.
Closure: in brass, with lock both in opening and closing

The handles are made of oiled American walnut wood while the blade made of stainless steel, sharpened and hand-picked on the stone by skilled craftsmen.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments such as to make every single knife unique, original and non-standardized. Any surface irregularities represent the confirmation of our manual processing and do not absolutely affect the operational functionality of the tool.

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

The Final Touch set consists of a tasting spoon with integrated tweezers, a plate decorator and precision tweezers.

The Final Touch set tools are made of high-quality stainless steel and food-safe silicone.

The Final Touch Set made by triangle® Solingen is dishwasher-safe.

Double-sided triangle Melon Baller Ø 22/25 mm (0.85 / 1 inches) with sharpened edges creates balls from fruits, vegetables, cream or butter.

Stainless steel and dishwasher-safe.

Made in Solingen/Germany.

More and more consumers buy with their eyes first and perceive details that we sometimes don't pay attention to. The way in which products are presented and the way in which the fruit and vegetable counter is set up is therefore becoming truly strategic! A successful and appealing idea comes from the so-called 'carving' of fruit and vegetables. It seems that the first evidence of the art of fruit and vegetable carving dates back to the end of the 14th century in Thailand. During royal celebrations, fruit sculptures were placed in crowns made of woven banana leaves and given to the river as a sign of purification and thanksgiving. The idea is said to have come from the emperor's wife, who was the first to prepare a buffet of fruit and vegetables transformed into flowers and animals. The secret to achieving impressive sculptures is to buy products with a solid consistency and to use lemon juice to prevent the compositions from turning black. Carrots, tomatoes, pineapples, radishes... are products that stimulate very creative carving. And in this season definitely melon and watermelon. Kitchen utensils from the German company Triangle, designed down to the last detail, created with a great deal of knowledge, with a very simple use and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality tools with excellent sharpness. A wide range of tools for carving and decorating fruit and vegetables.

Triangle - Carving Knife V shape large

Fruit carving knife Kitchen utensils from the German company Triangle, designed down to the smallest detail, created with a great deal of craftsmanship, with very simple handling and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality utensils with excellent sharpness. Wide range of utensils for carving and decorating fruit and vegetables.

Knife for carving and decorating fruit and vegetables, V-shaped and 1.5 cm wide.

Ideal for carving watermelons and melons.

Non-slip handle

Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.

The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)

This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.

Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.

The helmet can accept up to three decorative plumes (sold separately).

Perfect for decorating a tavern, a living room, a business

Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg

Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.

The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.

Dimensions: about 30 x 30 x 20 cm

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi artisanal
Production Lama: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: walnut wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closure: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.

Old Bear ™ model specifically produced for mushroom picking thanks to the curved blade and the brush inserted in the handle

Type of production: semi-artisan
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: olive wood handle
Blade length: 65mm.
Blade thickness: 2mm.
Length closed: 130mm.
Thick when closed: 200mm.
Weight: 49g.
Closing: viro block

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent no.1187282, still filed in 1985 by Todesco di Maniago, an active partner. of this project) which can be activated both in the open and closed positions.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9327/19 Electrician

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 44g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.

The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.

Intended use: sports / collection

Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Triangle - Straight Chef's Spatula - Kitchen

Designed for decorating with total control it is perfectly suitable for easily spreading icing, cream and cream on cake edges. The blade is flexible, made of stainless steel and is 12 cm long.

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

Type of production: semi-handmade
Country of production: Italy
Blade: 420 stainless steel to 54/56 HRC
Handle: in American walnut
Blade length: 95mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 215mm.
Weight: 91g.
Closing: in brass, with locking both in opening and closing

The sleeves are made of American oleate walnut wood while the blade is made of stainless steel, sharpened and manually picked on the stone by skilled craftsmen hands.

Being a model without a return spring, the blade is fixed to the handle by a solid brass safety ring with a special locking device (patent pending n.1187282 filed again in 1985 by the Todesco company of Maniago, which is active partner of this project) can be activated both in open position and in closed position.

This product was built by subjecting the necessary raw materials to artisanal treatments that make each single knife unique, original and not standardized. Any superficial irregularities represent the confirmation of our manual workings and do not compromise the operational functionality of the tool.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Olive wood
Blade Length: 100mm.
Blade thickness: 2mm.
Closed length: 127mm.
Closed thickness: 22mm.
Total length: 225mm.
Weight: 67g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 90mm.
Blade thickness: 2mm.
Closed length: 120mm.
Closed thickness: 22mm.
Overall length: 212mm.
Weight: 62g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: Multilayer Wood & Italian Flag
Blade Length: 80mm.
Blade thickness: 2mm.
Closed length: 109mm.
Closed thickness: 22mm.
Total length: 190mm.
Weight: 37g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Type of production: artisanal seed
Blade production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Manicure: olive wood handle
Blade Length: 70mm.
Blade thickness: 2mm.
Closed length: 97mm.
Closed thickness: 22mm.
Total Length: 170mm.
Weight: 32g.
Closure: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Gift Box by Antonini designed for the classic Old Bear models with 19cm, 21cm and 23cm blades.
Select in the drop-down menu on the side the right size of the knife to be contained inside.

Made in Italy entirely of wood and cardboard, it gives a touch of class to your knife.

Compatibility:

AE-9307/19LN
AE-9307/21LN
AE-9307/23LN

AE-9307/19LU
AE-9307/21LU
AE-9307/23LU

AE-9307/19MT
AE-9307/21MT
AE-9307/23MT

AE-9303/19MNN
AE-9303/21MNN
AE-9303/23MNN

AE-9303/19MNK
AE-9303/21MNK
AE-9303/23MNK

AE-9305/19LN
AE-9305/21LU
AE-9305/23MNK

9307/17

Type of production: Hand seeds
Production Lama: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 70mm.
Blade Thickness: 2mm.
Closed Length: 97mm.
Thick when closed: 22mm.
Overall length: 170mm.
Weight: 34g.
Closing: viro block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: M (19 cm - 7½ ") and L (cm.21 - 8¼") as above analitically presented.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

9307/19 M

Type of production: mostly by hand
Production Country: Italy
Blade: Stainless steel AISI 420 tempered - HRC 54/56
Handle: walnut
Blade length: 80mm.
Blade Thickness: 2mm.
Closed Length: 109mm.
Thick when closed: 22mm.
Overall length: 190mm.
Weight: 36g.
Closing: rotating block

"Old Bear ™" (*) is our new and exclusive folding knife line featuring simple and ergonomic lines. It marks and celebrates the 90th anniversary of our company (1925-2015), and intentionally Involves production process engaging in high levels of manual production, skilled and experienced manufacture.

The knife handle is aged in oil-treated walnut wood, while its blade is in stainless steel and stone is sharpened by skilled and qualified craftsman 'hands.
The "Old Bear ™" knife comes without no-return spring meaning its blade locking system features a solid safety ring (covered by patent n.1187282 deposited in the year 1985 by Todesco company from Maniago Which is active partners of this project) That fixed the handle in open and closed positions.
Currently "Old Bear ™" knife line is available in two sizes: S, M, L, XL.

The knife blade comes with our salt-etched "Old Bear ™" and logo into a single fashionable and personalized paper box together with a new "old-style" cardboard display box with 12 little boxes plus 1 open knife.

BLADE: Hardened Aisi 420 steel - HRC 54/56
FINISHING: Polished stainless steel
HANDLE: Aged walnut wood
SAFETY RING: Brass with locking

IMPORTANT NOTE: This product manufactured by Has Been Submitting to the used raw materials to manual treatments and processes That Make every single knife unique, original and not standardized. Any Irregularities on the knife surface are additional Guarantees of its uniqueness and manual processes and they do not affect the knife functionalities.

Old Bear ™ is the new and exclusive line of pocket knives produced by the maniago company Antonini. This series is characterized by simple and ergonomic shapes, celebrating the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high level of manual skills.

9307 / 21L

Type of production: semi-handmade
Lama production: Italy
Blade: Tempered Aisi 420 stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 90mm.
Blade thickness: 2mm.
Length closed: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 60g.
Closure: viro block

The sleeves are made of antique walnut and oiled, while the blade made of stainless steel, is sharpened and manually reworked on the stone by skilled craftsmen hands.

Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 filed again in 1985 by the company Todesco di Maniago which is active partner of this project) can be activated both in open position and in closed position.

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

Triangle - Set taglia spirale -3 pz - Curler

Set Con il pratico set taglia spirale - curler set , le verdure vannno tagliate con facilità per formare spirale decorative di 3 misure.

Il taglia spirale é idoneo per cetrioli, carote, patate e molti altri alimenti solidi. Grazie all' impugnatura è possibile una lavorazione particolarmente sicura e veloce. Idoneo per lavastoviglie.

La Curler set contiene: 3 taglia spirale in diverse dimensioni e una maniglia smontabile.

Antiruggine e lavabili in lavastoviglie.