Last up date

For easy cutting vegetable garlands of 6 cm width.

For best results set the cutter on its foot and position it with one hand. Use the other hand to stick fruit and vegetable into the cone.

Start rotating.

An end holder helps to process the end pieces for minimum loss.

Hard plastic and stainless steel, 10 x 8,5 x 9 cm, cone Ø 7,5 cm, hardened stainless steel blade, dishwasher-safe.

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

Triangle - Stainless steel quenelle spoon cm 3X20,5

NOVELTY! 

Quenelle or nocken transform any cream or mass into a visual and culinary delight, taking decorative serving and portioning to the next level.

Quenelle line spoons by Triangle are available in two sizes.

The short handle is suitable for ergonomic work from the wrist.

The long handle is suitable for working in deep containers.

The GreenGrip, used for the handles of the Spirit series, is made of 98% bio-based plastic with 40% wood.

There are no limits to your creativity!

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

The Final Touch set consists of a tasting spoon with integrated tweezers, a plate decorator and precision tweezers.

The Final Touch set tools are made of high-quality stainless steel and food-safe silicone.

The Final Touch Set made by triangle® Solingen is dishwasher-safe.

Double-sided triangle Melon Baller Ø 22/25 mm (0.85 / 1 inches) with sharpened edges creates balls from fruits, vegetables, cream or butter.

Stainless steel and dishwasher-safe.

Made in Solingen/Germany.

More and more consumers buy with their eyes first and perceive details that we sometimes don't pay attention to. The way in which products are presented and the way in which the fruit and vegetable counter is set up is therefore becoming truly strategic! A successful and appealing idea comes from the so-called 'carving' of fruit and vegetables. It seems that the first evidence of the art of fruit and vegetable carving dates back to the end of the 14th century in Thailand. During royal celebrations, fruit sculptures were placed in crowns made of woven banana leaves and given to the river as a sign of purification and thanksgiving. The idea is said to have come from the emperor's wife, who was the first to prepare a buffet of fruit and vegetables transformed into flowers and animals. The secret to achieving impressive sculptures is to buy products with a solid consistency and to use lemon juice to prevent the compositions from turning black. Carrots, tomatoes, pineapples, radishes... are products that stimulate very creative carving. And in this season definitely melon and watermelon. Kitchen utensils from the German company Triangle, designed down to the last detail, created with a great deal of knowledge, with a very simple use and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality tools with excellent sharpness. A wide range of tools for carving and decorating fruit and vegetables.

Triangle - Carving Knife V shape large

Fruit carving knife Kitchen utensils from the German company Triangle, designed down to the smallest detail, created with a great deal of craftsmanship, with very simple handling and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality utensils with excellent sharpness. Wide range of utensils for carving and decorating fruit and vegetables.

Knife for carving and decorating fruit and vegetables, V-shaped and 1.5 cm wide.

Ideal for carving watermelons and melons.

Non-slip handle

Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.

The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)

This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.

Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.

The helmet can accept up to three decorative plumes (sold separately).

Perfect for decorating a tavern, a living room, a business

Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg

Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.

The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.

Dimensions: about 30 x 30 x 20 cm

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Gouge 22 can be used for details such as fingers, mouth, lips, eyes etc ...

Gouge measures: total length about 24.5 cm
Production: Switzerland

4 different sizes are available from 1 to 4mm

Guarda tutti i prodotti Pfeil a questo link: PFEIL

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.11A

Gouge measures: total length about 24.5 cm
Production: Switzerland

7 different sizes are available from 1 to 10mm

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.7A

Gouge measures: total length about 24.5 cm
Production: Switzerland

10 different sizes are available from 4 to 30mm

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.

Intended use: sports / collection

Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -

Non-stainless steel tools, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully hand-sharpened, and all equipped with wooden handles. Palm gouge for working wood
Set consisting of 6 pieces
Height with wooden handle: 128mm
Blade height: 73mm

Country of production: Switzerland.

Measurements in the package:

L 5/3
L 7/6
L 7/10
L 9/5
L 11/1
L 12/1

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For carving lettering and ornamentation and for sculpting figures.

Gouges serie 16 - 35°

Gouge measures: total length 24.5 cm

They are provided 4 different measures from 1 to 8 mm

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

Tools in non-stainless steel, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles. Handheld gouge for working wood
Set of 8 pieces
Height with wooden handle: 135mm
Blade height: 80mm

Measures included in the package:
Production: Switzerland

L 1/8
L 1s / 8
L 1a / 8
L 5/8
L 11/3
L 12a / 4

Pfeil gauze fabric bag composed of 10 gouges

Closed dimension: 30cm x 11cm

Weight: 1030 gr.

The 10 different models of gouges in the package:

- 1/8
- 1s / 8
- 5/8
- 5/20
- 7/6
- 7/14
- 7L / 20
- 8/4
- 8a / 10
- 9/10
- 11/3
- 12/6

Pfeil gauze fabric bag consisting of 10 gouges and 2 accessories

Closed dimension: 30cm x 10cm

Weight: 1330 gr.

Present accessories:
- 1x Kerb 12
- 1x pencil

The 10 different models of gouges in the package:

- 1s / 10
- 1s / 20
- 1s / 30
- 3/35
- 4/20
- 5/12
- 7/10
- 7/35
- 11/5
- 11/10

Triangle - Straight Chef's Spatula - Kitchen

Designed for decorating with total control it is perfectly suitable for easily spreading icing, cream and cream on cake edges. The blade is flexible, made of stainless steel and is 12 cm long.

Pfeil carving knives bag in fabric

4 pieces

- Schaller knife SchG

- Schaller knife SchK

- Canard carving knife CaG

- Canard carving knife CaK

Pfeil fabric bag with gouges

Closed dimension: 30cm x 23cm

Weight: 3000 gr.

Present accessories:
- 80mm diameter wooden hammer
- Two Arkansas grinding stones
- Oil
- Brienz Carving Knife

The 20 different models of gouges present in the package:
- 1/16
- 1s / 16
- 2/20
- 3/3
- 3/12
- 3/25
- 5/35
- 7/20
- 8/7
- 8/18
- 8/25
- 9/7
- 8th / 18
- 9/15
- 7L / 25
- 11/2
- 11/10
- 15/3
- 12/10
- 14/8

No stainless steel tools, for sculpture and woodwork, all tempered with final hardness between 59-61 RC, sharpened and ready, and all with wooden grip. PDAs gouges for woodworking.
Set consists of 8 pieces.
Height with wooden handle: 135mm
Blade height: 80mm

Production: Switzerland

Measures included in the package:

B2/12
B4/12
B7L/12
B8/10 
B9/7 
B11/7 
B15/6 
B25/10

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For shaping recesses and working in corners.

Gouges serie 8L

Gouge measures: total length 24.5 cm

They are provided 9 different measures from 4 to 35 mm

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

For smaller hands and beginners tackling basic projects. Exact same quality and features as our full-sized chisels. 85 mm blade length, 200 mm overall length.
Contents: pfeil chip carving knive pfeil, 3 medium-sized tools.

D 1/8, D 8/7, D 12/6, pfeil

Size: 260 x 130 mm

Weight: 160 g

Blade length: 85 mm
Overall length 200 mm

wooden support with rigid black leather jacket for sharpening gouges, chisels and sgalpelli Pfeil
Dimensions: 300x40x20 mm

Bag fabric door gouges Pfeil

Closed size: 30cm x 23cm

Capacity: max 12 pieces

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

White beech with steel ferrules. Blade is chrome vanadium steel, finely honed and polished razor sharp. 25° bevel.

Gouge measures: total length 29ncm

Bag fabric door gouges Pfeil

Closed size: 30cm x 13cm

Capacity: max 12 pieces

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For large pieces. Hornbeam handle, ergonomic design, heavy-duty ferrules.

Gouge series Heavy 50

gouge measures: total length about 29 cm - blade width 5cm - 310gr weight.
Production: Switzerland

7 different models are available

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 200 mm
- Blade length: 60mm
- Weight: 46g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 200 mm
- Blade length: 60mm
- Weight: 40g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 183 mm
- Blade length: 40mm
- Weight: 33gr

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 135 mm
- Blade length: 35mm
- Weight: 23g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 135 mm
- Blade length: 3cm
- Weight: 26g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 165 mm
- Blade length: 5,7
- Weight: 40g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 3,5
- Weight: 22g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 3,5
- Weight: 22g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 4,5
- Weight: 23g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 6
- Weight: 28g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 155 mm
- Blade length: 5
- Weight: 28g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 183 mm
- Blade length: 4
- Weight: 24gr

Production: Switzerland

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

Gouges are used for shaping recesses and raised surfaces, for instance folds such as drapery.

Gouges serie 8A

Gouge measures: total length 24.5 cm

They are provided 9 different measures from 3 to 30 mm