Last up date
-
Made in Italy - JUNIOR EXPRESS - 3 Cup Coffee Maker
The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.Instructions for use:
- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.Cooking:
- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.Removal:
- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.
Maintenance:
- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.000321 -
Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS
Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .ZERA2 -
Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS
Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS
The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.
Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.
funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker
ZERA4 -
Made in Italy - JUNIOR EXPRESS - 6 Cup Coffee Maker
The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.Instructions for use:
- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.Cooking:
- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.Removal:
- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.
Maintenance:
- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.000338 -
Bialetti - Set 3 gaskets with filter - 6 cups
Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.Package Contents:
- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee makerCompatibility: Suitable for Moka Express, Dama, Break and Moka Timer models
Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.
Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.
Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.
097437 -
Bialetti - Set 3 gaskets with filter - 12 cups
Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.Package Contents:
- 3 rubber gaskets
- 1 aluminum filter
- For 12-cup coffee makerCompatibility: Suitable for Moka Express, Dama, Break and Moka Timer models
Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.
Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.
Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.
097468 -
Herold Solingen - Streich-Riemen - Adjustable Leather Strop with Green Compound for Straight Razors
Product Description: The Streich-Riemen strop with green compound is an essential accessory for keeping straight razors perfectly sharp. Made in Germany and crafted from high-quality natural leather, this strop is treated on one side with green compound, a light abrasive that ensures an even finer finish on the blade. The combination of the treated side with green compound and the untreated natural leather side provides optimal sharpening and a comfortable shave.
Main Features:
- Material: Natural leather with one side treated with green abrasive compound.
- Origin: Made in Germany.
- Compatibility: Ideal for all straight razors.
- Abrasive Compound: Green compound applied on one side for more aggressive sharpening.
Advantages:
- Superior sharpening thanks to the green compound side, enhancing blade finish.
- The natural leather side aligns the blade edge without additional abrasive treatment.
- Extends razor life by reducing the need for professional sharpening.
Instructions for Use:
- Use the side treated with green compound to sharpen the blade.
- Follow with the natural leather side to perfectly align the blade edge.
- Repeat until the desired finish is achieved.
HS10175 -
Hubertus Solingen - Bavarian Picnic Knives - 11 cm - genuine stag horn - vintage knife
Bavarian dress knife or Bavarian picnic knife are the common English terms for the special type of fixed blade knife called Trachtenmesser in Germany. These knives are found in the right side pocket of a traditional Bavarian leather pant and only part of the handle is visible as you pass that pocket.
Bavarian dress knives are characterized by the particular shape of the blade and in most cases by a decorated ring. This ferrule constitutes the passage between the blade and the handle of the deer horn or other hunting trophies that is fixed with the tang. A dark brown leather sheath is slid over the blade for protection purposes.
Intended use: Hunting / Collection
Blade: 440 stainless steel
Handle: Deer
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 225mm.
Balancing: -
Weight: 109g.
Sheath: in leatherHS-1910-CE -
Linder - Master Hunter in plum and brass - 191415 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440A stainless steel
Blade treatment: Satin finish
Handle: plum wood with brass guard and knob
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Balancing: set back
Weight: 248g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-191415 -
Linder - Stag Bowie - 196118 - hunting knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: Satin finish
Handle: Stag with steel guard and aluminum knob
Blade length: 177mm.
Blade thickness: 4.5mm.
Total length: 305mm.
Balancing: advanced
Weight: 274g.
Sheath: in leather
Packaging: Cardboard box with Linder logos
Note: -LI-196118 -
BenchMark - Training Bali - BM006 - Training knife
*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***
Intended Use: Training
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.BE-BM006 -
Bialetti - Top Moka 6 cups - Coffee maker
Bialetti - Top Moka 6 cups - Coffee maker The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and the MoMA in New York. With the Bialetti moka, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Vintage model of the Bialetti company still entirely Made in Italy, version only 6 cups in aluminum completely. .5330E -
BladeTech - Riptide Karambit - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson12063 -
Fox/Combative Edge - SR11 Plain - FX-CED-M3 coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741 -
Fox/Combative Edge - SR11S Serrated - FX-CED-M3S - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741S -
Fox/Combative Edge - Salus - FX-CED-M2 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:7743 -
Linder - Champ 1 Cervo - 105009 - coltello
Destinazione d'uso: Caccia/Collezione
Lama: Acciaio Inox ATS-34 60HRC
Manicatura: Cervo
Lunghezza lama: 98mm.
Spessore della lama: 4mm.
Lunghezza totale: 210mm.
Lunghezza chiuso: -
Bilanciatura: Arretrata a 3cm. prima della guardia
Peso: 180g.
Chiusura: -
Clip: -
Fodero: Da cintura, in cuoio
Note:4212 -
Linder - Bowie knife Cocobolo - L176125 - knife
Intended use: Hunting / Collection
Blade: 440 58HRC Stainless Steel
Handle: Cocobolo wood
Blade length: 250mm.
Blade thickness: 4mm.
Total length: 390mm.
Length closed: -
Balancing: Advanced, 3cm. from the guard branch
Weight: 575g.
Closure: -
Clip: -
Sheath: From belt, in leatherL177125 -
Linder - Crocodile Hunter Bowie - New Version 2019 - 203630 - knife
New 2019 version, now with 31cm blade. (previously from 26cm.)
Intended use: Hunting / Collection
Type of production: industrial
Blade: in C60 (1060) steel with high carbon content - 58-59 HRC
Blade finish: Satin finish
Country of production: Solingen - Germany
Handle: Cocobolo wood with nickel-plated steel guard and knob
Blade length: 310mm.
Blade thickness: 5mm.
Total length: 440mm.
Balance: Advanced
Weight: 656g.
Sheath: Leather
Notes: new 2019 versionL203630 -
Linder - Mark 2 knife Deer - 107515 - knife
Intended use: Hunting
Type of production: Industrial
Lama production: Germany
Blade: 440C 58HRC steel
Blade treatment: -
Handle: Deer
Blade length: 150mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 260mm.
Thickness when closed: -
Balancing: set back, at 2cm.
Weight: 216g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box
Note: -6361