Last up date

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

 

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

Drosselmeyer - Nutcracker (Plastic) Nuts make for a tasty, healthy snack, but they can be tough to crack. The challenge was to invent a nutcracker that does the hard work for you and collects the shells. It had to be able to crack any nut, be really easy to squeeze without any risk of pinching your fingers, and not send the shells flying all over the place. I tried all kinds of designs, but a double lever action integrated with a conical tube turned out to be the best solution. It took a while to get it right, but that's okay because it's designed to last forever. Material: PLASTIC Measurements: H 11cm B 5cm

Drosselmeyer - The Tea Infuser, Silver

The new tea infuser

Easy to fill and easy to clean

Elegant design with micro-perforated sliding lid

Works with even the finest tea leaves

Can be put on the table after use without dripping

Because tea is one of the world's most loved beverages, tea infusers need to be special instruments. We found that existing tea infusers didn’t match our passion for tea. Brewing flavor is essential, but so is the art of infusing tea with no spillage.

The Drosselmeyer tea infuser is a beautifully simple non-perforated spoon with a sliding lid. It’s easy to fill and being non-perforated means you can put directly on the table after use. The ingenious design ensures no spillage from even the finest tea leaves.

Material: Stainless steel

Color: Stainless steel

Measurements: H 15 cm, W 3 cm

The best accessory to eat crayfish, crab or lobster!

The Caretta pliers have an exclusive design, with an integrated spring-loaded handle and an open jaw to accommodate any size of claw or leg.

The patented double lever action makes it an easy, clean and efficient way to enjoy shellfish and seafood without making a mess. Simply place the claw at the back of the serrated jaw and squeeze gently, until the shell cracks. To extract the meat in one piece, simply repeat a few times on different sections of the claw.

The upper jaw ensures the broken shells splatter away from the user.

Made from quality stainless steel.

Dishwasher safe.

Weight: 199 grams

Length x Width x Height: 17.5 x 9 x 2.7cm