Last up date

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

PROFESSIONAL CORDLESS HAIR CLIPPER FF 2020C -GOLD JRL

Reference: JRL/FF2020C

Professional Cordless Hair Clipper FF 2020C- GOLD JRL

This professional hair clipper reaches the level and even surpasses numerous models of traditional brands of professional machines. It performs with guarantees in the daily work of any barber or hairdresser with up to 4 hours of battery work, a system of blades capable of preserving lower temperatures and regulating the working revolutions between 6000rpm and 7200 rpm. Without a doubt, a good choice for demanding professionals.

Features:

Cold blade technology.

Smart-Clip Technology, featuring constant speed.

LED Display (battery life)

Lever lock for extended use

Lithium Ion battery with a maximum duration of 4h and a charging time of 3h.

Motor type: 6.5W rotary low sound

Revolutions: 6000 to 7200 rpm

Blades adjustment: 0.5 to 3.5mm (can be adjusted to 0mm)

Accessories:

Screwdriver

Cleaning brush

Lubricant Combs: 10 combs (0.5, 1.5, 2, 3, 4, 5, 6, 7, 8)

Charger adapter

Blade protector and adjuster.

JRL - SF08G Replacement Head for Cordless Professional Trimmer 2020T

JRL STD Gold FF2020T SF08G Ultra Cool Stainless Steel Blade Head

Original JRL replacement for the 2020t gold edition Fresh Fade Trimmer trimmer. Ideal for razor fade cuts and shades of the highest quality and precision! Stainless steel blade that won't rust and stays sharp for a long time.

Patented "Cool Blade" technology for constant head cooling.

Features: Stainless steel blades, self-sharpening and long-lasting. 

Compatible with model JRL 2020T SF 08

JRL - Replacement head BF 04 fine for Cordless 2020C professional trimmer clipper

Rust-free, self-sharpening, long-lasting stainless steel fine blades - stay sharp for every cut.

Compatible with model JRL 2020C

JRL - Replacement Head BF 03 for Cordless 2020C Professional Trimmer Shearer

Large rust-free, self-sharpening, long-lasting stainless steel blades - stay sharp for every cut.

Compatible with JRL model 2020C

JRL - Replacement Head SF03 Fresh Fade 1050 - JRLSF03

Rust-free, self-sharpening, long-lasting stainless steel blades - stay sharp for every cut.
Adjustable screw with zero clearance.

Compatible with Fresh Fade 1050 model.

JRL - Replacement Head for 2020C Cordless Professional Trimmer Shearer BF 03G

Rust-free, self-sharpening, long-lasting stainless steel blades - stay sharp for every cut.

Compatible with JRL model 2020C

FF2020T Trimmer Standard T-Blade The FF2020T Trimmer Standard T-Blade is a Rust-free, long-lasting, self-sharpening Stainless Steel blade that stays sharp for every cut making it easier to design with precision in touch areas. Fits on trimmer FF2020T Comes with both stationary and moving blades

T-Wide Trimmer Fresh Fade 1050 SF 04 - Original replacement blade head Rust-free, self-sharpening, long-lasting stainless steel blades - stay sharp for every cut. Compatible with Fresh Fade 1050 model

FreshFade 2020T Trimmer 360°

Exposed Ultra Sharp T shape blade

Patented Smart-Clip Technology

Cool BladeTechnology: Blade stays cool and Sharp after extended use

2 Hours battery life

7,200 Revolutions Per Minute

Superior Motor: 3 times more powerful on torsion than most trimmers on the market.

Quiet Motor: Quiet motor, under 60dB, creates quiet working environment Global Universal Voltage

Stainless Steel blade Ideal For lining designing and dry shaving

Hanging Hook

Accessories:

1 Screwdriver,

1 Brush,

1 Lubricant Oil,

1 Blade Protector.

PROFESSIONAL CORDLESS HAIR CLIPPER FF 2020C JRL

Reference: JRL/FF2020C

Professional Cordless Hair Clipper FF 2020C JRL

This professional hair clipper reaches the level and even surpasses numerous models of traditional brands of professional machines. It performs with guarantees in the daily work of any barber or hairdresser with up to 4 hours of battery work, a system of blades capable of preserving lower temperatures and regulating the working revolutions between 6000rpm and 7200 rpm. Without a doubt, a good choice for demanding professionals.

Features:

Cold blade technology.

Smart-Clip Technology, featuring constant speed.

LED Display (battery life)

Lever lock for extended use

Lithium Ion battery with a maximum duration of 4h and a charging time of 3h.

Motor type: 6.5W rotary low sound

Revolutions: 6000 to 7200 rpm

Blades adjustment: 0.5 to 3.5mm (can be adjusted to 0mm)

Accessories:

Screwdriver

Cleaning brush

Lubricant Combs: 10 combs (0.5, 1.5, 2, 3, 4, 5, 6, 7, 8)

Charger adapter

Blade protector and adjuster.

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

 

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

JRL Universale Clipper Guards Set (8pcs) JRL Universal Clipper Guards fit most hair clipper brands on the market, Size: 0(1/32"), 1/2(1/16"), 1-1/2(3/16"), 1(1/8"), 2(1/4"), 3(3/8"), 4(1/2"), 5(5/8") Advantages: Protects the scalp from the sharp edges of moving blades. Universal (can be used with any make and model of hair clipper). Resistant. Adequate space between the teeth for precise adjustment of the cut. Smooth and rounded edges.

Adjusts professional beard without wire / rechargeable at three speeds, with interchangeable cutting head in stainless steel and fixed cutting height at 0.5mm. The height of the cut can be increased using the 4 plastic spacers included in the package (from 2/3/4 / 5mm)

* 3.7V and 800mAh non-removable Li-ion battery
* Battery life of 90 consecutive minutes and full charge in 1h.
* 33mm wide stainless steel cutting head with removable and interchangeable height of 0.5mm
* LCD display to monitor the speed used and the remaining charge minutes
* Three different cutting speeds: 5000/5500/6000 revolutions per minute
* Power button and selection of separate speeds
* Lightweight, for maximum convenience
* 4 Plastic risers included
* 2m cable for direct connection to the mains or for connection to the charging base, included in the package
* Maintenance lubricating oil and cleaning brush

Excellent for private use. pre-shipment check guaranteed by our internal assistance and re-grinding laboratory.

We recommend constant lubrication by using the oil supplied inside the package to be applied to the blades after each use.