Last up date

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

In the late 1980s, Walter Fortunato designed and built the stopper sealing system that has made Waf famous throughout the world. The Block Waf System© still represents the most ingenious invention for preserving the precious characteristics of newly uncorked sparkling wines over time. The patent, applied in many items in the stoppers line, follows Pascal's principle that pressure exerted on a fluid is transmitted in all directions with equal intensity. By applying Pascal's principle to the bottle, the elastic teat goes to adhere to the inner wall of the mouthpiece. The head gasket with which the teat is fitted tends to rest against the top edge of the bottle, creating an initial obstacle to the escape of carbon dioxide. The carbon dioxide, again due to Pascal's principle, enters the teat through the hole below and as the pressure increases it goes to expand against the glass wall thus creating a state of overpressure inside. The external fixing bracket is designed to counteract the vertical thrust that the stopper receives and thus ensures its tightness, which has been tested up to 6 atmospheres.

Equipped with -Block WAF SYSTEM © with certified seal over 6 ATM.

MATERIAL: High-carbon chrome-plated steel. Plastics certified for food contact

COLOR: Gold

SIZE: 4.5 x 4.0 x 6.2 cm

WASH: By hand, do not use abrasive sponges and/or detergents.

ONE-LIGHT is a portable and rechargeable "outdoor, in-door" LED Lampshade Lamp that can be easily housed on the neck of a bottle.

NEW 2023

On the coffee table of a restaurant or bar, in a living room, in a study where it illuminates areas of dimness, ONE-LIGHT can become a piece of furniture that is impossible to resist.

Thanks to its simple and modern design, it fits perfectly into any environment.

The body is made of Veroglas technopolymer, in as many as 13 colors to suit all tastes, and features a raised surface decoration reminiscent of the surface of the moon.

At the bottom, it has a rubber ring that fits the bottle rim.

The two-intensity, waterproof LED light source provides up to 24 hours at medium light intensity, up to 10 hours at maximum light intensity.

USB cable included for charging the lamp.

ONE-LIGHT conveniently recharges with any battery charger.

Charging time: 5-6 hours.

DIMENSIONS: Ø 103 mm x 88 mm x Ø 77 mm

WAF Corkscrews

The elegance of a gesture that can be found in everyday life as well as on important occasions.

Corking a bottle represents the encounter between the culture of drinking and the importance of a ritual.

Designed for the first patent in 1965, Waf corkscrews have reached an increasingly sophisticated level of technology over time, so much so that they are now considered a classic Italian wine article. An important itinerary, where the evolution of an object is realised in a gesture: uncorking a bottle of good wine with simplicity and safety.

Waf corkscrews are the only ones of their kind to have been designed and manufactured with these factors in mind, as well as for easy and safe cork extraction.

Extraction takes place vertically and progressively without any possibility of damaging the cork itself or leaving any residue.

Corkscrew SENIOR 3B

Each piece of this corkscrew is worked individually with care and perfectly reflects the quality level reached by Waf in metalworking. The Senior corkscrew is the most coveted gift par excellence, the absolute protagonist of conviviality movements, it allows quick and safe uncorking with one hand. Invented by Walter Fortunato, founder of the company.

FEATURES:

Material : Bronze-plated aluminium alloy 

Dimensions : 18.0 x 5.5 x 23.0 cm

Weight: 564 g.

Uncork a bottle is the meeting between the drinking culture and the importance of a ritual.
Designed for the first patent in 1965, the corkscrew Waf reached in time a level of technology more and more sophisticated, so now considered to be a classic wine Article italiano.Un important route, where the evolution of an object is expressed in a gesture: uncork with ease and confidence a bottle of good wine.
corkscrew waf are the only ones in their kind to be designed and built taking into consideration these factors, as well as for easy and safe removal of the cap.
FEATURES: ITALY - mechanical movement is made of hardened steel and is guaranteed.
- the rack and the spiral are made from a single steel bar for turning and milling.
- the sharp profile of the spiral makes it particularly suited to the silicone plugs.
- on the various models are installed bushings down or brass or Teflon.
- on all models is provided a system for freewheeling at the end of extraction, so as to avoid jamming the mechanical movement.
The corkscrew waf is provided with a hanger in wood for wall .
- packaging: ribbed cardboard - black colour - material: fiberglass.

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

 

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

LED LAMPSHADE PORTABLE AND RECHARGEABLE- LIGHT -

ONE-LIGHT is an 'outdoor, in-door' portable and rechargeable, which can be the neck of a bottle.

NOVELTY One-Light is a portable and rechargeable 'outdoor, in-door' LED lampshade that can be easily accommodated on the neck of a bottle.

On the coffee table of a restaurant or bar, in a living room, in a studio to illuminate shady areas, -ONE-LIGHT can become a furnishing accessory that is impossible to resist.

An essential and modern design, it fits perfectly into any environment.

Features:

USB cable included for charging the lamp.

ONE-LIGHT conveniently recharges with any battery charger.

Charging time: 5-6 hours.

Material: Matt painted aluminium alloy body

COLOURS: BRONZE OR BLACK

DIMENSIONS: Ø 103 mm x 88 mm x Ø 77 mm .