Last inserted products, last up date, knives, flashlights, household items, harry potter, products from films, sale

Brainstream - Drip.it+ bottle drainer

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

A005883

€24.59

Only 8 left

Made in Italy - JUNIOR EXPRESS - 3 Cup Coffee Maker

The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

000321

€12.30

Only 4 left

Bialetti caffettiere e accessori - guarnizioni, imbuti

Rivsalt - Salt Crystals Refill 150gr - Kala Namak Salt

The BLACK set contains three sparkling Kala Namak salt stones from India, a unique ingredient that adds a secret touch to your dishes.
Kala Namak salt stands out for its distinctive flavor, with a slight hint of egg hidden behind spicy and slightly smoky notes, thanks to its high sulfur content.
Ideal for vegan cooking, Kala Namak salt is perfect for dishes such as scrambled tofu, chickpea omelets, and fruit salads. It adds a distinctive flavor that enhances any recipe.
A Unique Touch to Your Dishes
With its sparkling stones and extraordinary flavor, Kala Namak salt from the BLACK set will turn every dish into an unforgettable culinary experience.
Add this special ingredient to your cooking and discover new flavor possibilities.

RIV018

€16.39

Only 2 left

Zero Tolerance - Hinderer Slicer - CPM-MagnaCut & Green Micarta - SPRINT RUN - ZT0562MIC - knife

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

ZT0562MIC

€311.48

Only 2 left

Zero Tolerance - Sinkevich Flipper - CPM-MagnaCut & Blue Carbon Fiber - SPRINT RUN - ZT0452CFBLUBLK - knife

Intended Use: Tactical / Military

Type of production: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade treatment: Stonewashed
Handle: Titanium and blue Carbon Fiber
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system

ZT0452BLUCF

€0.00

Only 1 left

Rating:

93%

4.7

Out of stock

Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife

The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.

Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.

Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.

The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings

ZT0545

€290.98

Only 1 left

Rating:

100%

5

Out of stock

Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

ZT0450BLUCF

€270.49

Only 2 left

Rating:

100%

5

Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

ZT0006BLK

€368.85

Only 2 left

Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

ZT0006

€327.05

Only 2 left

Zero Tolerance - Sinkevich - S35VN Red Blackwash - Factory Special Series - ZT0452RDBW - knife

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"

ZT0452RDBW

€327.05

Only 1 left

Rating:

100%

5

Out of stock

Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

ZT0022CU

€266.39

Only 1 left

Rivsalt - Salt Crystals Refill 150gr - Mixed Salts

Enrich your kitchen with these three salt rocks from different parts of the world, perfect for adding variety and inspiration to your dishes.
Each rock has a unique flavor and can be grated directly onto pots, pans, fish, and meat.
In addition to being delicious, these salts are beautiful to look at, resembling gemstones, and are an elegant addition to the kitchen and dining table.

Salt Rocks Included in the Set:

Bolivian Rose Salt Rock: This salt is mild and sweet, ideal for everyday cooking. Perfect for meat and vegetable dishes, it adds a refined and flavorful touch.

Cubic Halite Salt Rock: With a natural but rather intense flavor, this salt is perfect for those seeking a robust and assertive taste.

Kala Namak Salt Rock: This salt has a spicy and slightly smoky flavor with a hint of egg due to the high sulfur content, making it unique and intriguing for various culinary preparations.

RIV032

€16.39

Only 2 left

Rivsalt - Chili Grater Set - rivsalt chili

Rivsalt was born from the mind of designer

Swedish designer Jens Sandriger during a trip to Beijing.

Having dinner at a famous Japanese restaurant in the city, Jens thought: this is really cool!

Before his eyes, the chef had just ground a Himalayan pink salt gem directly onto the guests' plates. That's when the Rivsalt idea was born: a unique dining experience that puts salt truly at the center of the table and the kitchen. From China to Sweden, the Rivsalt family of products soon spread around the world, becoming a must-have for taste enthusiasts.

The elements that make up the Rivsalt family of products are a synthesis of what the Earth offers and what man can skillfully work with.

Untreated oak bases and stainless steel graters highlight natural raw materials that are anything but common and, at times, rare.

Each element in the Rivsalt line fills objects hitherto considered everyday with meaning and value: salt, licorice, pepper, and toothpick become experiences out of the ordinary.

CHILI is about flavor and experience. Just like RIVSALT. So creating the chili product seemed natural to us.

A perfectly shaped grater made of stainless steel, an oak wood stand, and the best selection of chili peppers we could find.

Another Scandinavian gastronomic experience by RIVSALT.

The RIVSALT product range was designed by Swedish entrepreneur and designer Jens Sandringer. RIVSALT is about design, communication, and experience. Grating your own Rivsalt salt and spices simply adds flavor and style to any dining experience. The beautiful design can enhance the dining table. Many of the table accessories are also great communication items.

RIVSALT products are unique gifts for foodies and home chefs.

RIV-024

€28.68

Only 1 left

Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

ZT0990

€270.49

Only 3 left

Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

ZT0762

€368.03

Only 1 left

Rating:

93%

4.7

Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

ZT0308BLKTS

€381.15

Only 1 left

Rating:

93%

4.7

Out of stock

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS

Bialetti - Original spare part for Zera barley express - FUNNEL 2 CUPS The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual. Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day. Replacement funnel for Brikka Bialetti 2 cups aluminum funnel original spare part for Brikka Bialetti coffee maker The gasket is also included in the package. .

ZERA2

€2.87

Only 7 left

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

Bialetti - Original spare part for Zera barley express - FUNNEL 4 CUPS

The moka is a coffee maker designed by Alfonso Bialetti in 1933 and subsequently produced in more than 105 million units. It is a product of Italian industrial design famous all over the world, present in the permanent collection of the Triennale Design Museum in Milan and MoMA in New York. With the Bialetti coffee maker, the pleasure of coffee becomes a daily ritual.

Passion and originality distinguish the Bialetti coffee makers, where contemporary and modern design meets the best tradition, to let you savor all the taste and aroma of coffee with mocha every day.

funnel for Brikka Bialetti 4 cups aluminum funnel original spare part for Brikka Bialetti coffee maker

ZERA4

€3.28

Only 7 left

Rating:

100%

5

Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

ZT0707

€282.79

Only 1 left

Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

ZT0235

€209.02

Only 1 left

Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

ZT0357BW

Special Price €0.00 Regular Price €187.70

Only 3 left

Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

ZT0357

€176.23

Only 1 left

Out of stock

Rivsalt - Ginger &Turmeric Set Grater

GINGER & TURMERIC - PREMIUM SUN DRIED PIECES GINGER & TURMERIC are old best friends from India. Used in many of the same dishes, they complement each other extremely well – like most best friends do. These dried roots belong to the Zingiberaceae family and are said to have remarkable health benefits - possibly even more so together with grated PEPPER. For some extra zing, use the elegant spoon-grater to stir the grated roots into a classic curry, a delicious Caribbean sweet potato soup or your breakfast chia seed pudding. Or why not grate and stir into a fresh cocktail or your favorite smoothie? Works great on top of your morning latte, tea or super-healthy detox shot, too. A true RIVSALT gastronomic experience every time. When not in use, the stainless steel spoon-grater rests gracefully on the carefully carved oakwood stand - making it a beautiful centerpiece on your dining or kitchen table.

1561GINGER

€24.59

Only 2 left

Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

ZT0308

€356.56

Only 3 left

Rating:

93%

4.7

Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

ZT0230

€209.02

Only 1 left

Zero Tolerance - ZT0223 - Tim Galyean - Military Flipper - knife

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

ZT0223

€0.00

Only 1 left

Rating:

93%

4.7

Out of stock

Rivsalt -Freeze & Serve - Himalayan Salt Plates

Rivsalt -Freeze & Serve - Himalayan Salt Plates FREEZE & SERVE includes four himalayan salt plates, which turn any starter or dessert into a RIVSALT gastronomic experience. to use, simply pop the plates into your freezer for a couple of hours and take them out again just before serving. the plates have one flat side; great for starters like sashimi, tartar or salad, and another side with a rounded cavity; perfect for desserts like vanilla ice cream with grated raw LIQUORICE. In Michelin 2-star restaurant, Vila Joya in Albufeira Portugal, FREEZE & SERVE plates are used to exquisitely present butter. How to freeze & serve Freeze the plates for 2-3 hours. Take out just before serving. After using, wipe clean with a sponge using as little water as possible and no detergent. Dry with a kitchen towel. Leave to dry for at least 12 hours before placing back in original packaging. Store in low humidity conditions.

RIVFREEZE

Special Price €26.08 Regular Price €28.69

Only 1 left

Made in Italy - JUNIOR EXPRESS - 6 Cup Coffee Maker

The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

000338

€16.39

Only 2 left

Bialetti - Set 3 gaskets with filter - 6 cups

Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

097437

€3.69

Only 10 left

Zero Tolerance - Hinderer Slicer Frame Lock - Titanium - ZT0562TI - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Satin & Stonewashed
Handle: Stonewashed Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Closed thickness: 12mm.
Weight: 152g.
Closing system: Frame Lock
Clip: deep carry type, removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type or through lost ambidextrous on the blade, on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer

ZT0562TI

€319.67

Only 1 left

Out of stock

Zero Tolerance - Tim Galyean knife - Flipper Carbon Fiber - ZT0022 - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

ZT0022

€237.70

Only 1 left

Rating:

100%

5

Brainstream - BeepEgg Classic - ONE EGG FITS ALL

Brainstream - BeepEgg® Classic - ONE EGG FITS ALL BeepEgg® Classic is a precise egg-timer, which as with any other BeepEgg® will be boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play three tunes for the different levels of hardness.

5943CREGG

€7.78

Only 4 left

Rivsalt - Salt Crystal Refill 150gr - Persian Blue Salt

BLUE ROCK SALT is a unique and valuable product, perfect for enriching seafood dishes, salads, French cuisine and truffles.
This rare salt is distinguished by its initially strong flavor, which evolves into a delicacy characterized by a silky, velvety sweetness.
Blue salt is extracted from a salt mine located in the Middle East.
Its intriguing blue color is formed during salt crystallization, a process that occurs under intense pressures acting on salt deposits.
This phenomenon leads to light fracturing through the individual crystals, creating an optical illusion that gives the salt a distinctive, shimmering blue color.

RIV010

€18.03

Only 1 left

Rivsalt - Big Grater & Stand for pink salt Himalayano

Rivsalt - grater pink salt Himalayano- Rivsalt is a new way to appreciate a vital and valuable as the salt. It consists of a rose bud pure Himalayan salt, a mini-grater Japanese stainless steel and a cylindrical base of oak untreated. Each bud of Himalayan salt has an irregular shape, different from one another, each grain that is ground is unique: can be pink, like crystal from which it comes, or white, as the striations that characterize it. Rivsalt you take the right of the center of your table, creating a satisfying experience gustatory, tactile and visual.

1561BIG

€40.16

Only 1 left

Out of stock

Zero Tolerance - Hinderer Slicer Frame Lock - Carbon Fiber - ZT0562CF - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

ZT0562CF

€299.18

Only 1 left

Rating:

89%

4.5

Bialetti - Set 3 gaskets with filter - 12 cups

Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 12-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

097468

€7.38

Only 1 left

Rating:

100%

5

Out of stock

Rivsalt - Salt Crystal Refill 150gr - Himalayan Pink Salt

Discover the RIVSALT refill pack, with three Himalayan pink salt rocks totaling about 150 grams.
This pure and natural salt, unrefined and without chemical treatment, is rich in minerals, including iron and magnesium.

THERE IS SALT AND SALT

RIVSALT transforms salt into a taste and visual experience with unique salt rocks, each with different shades of pink and white.

Benefits of Himalayan Pink Salt

Reduces the risks of hypertension and water retention
Supports respiratory activity
Promotes more regular sleep

Himalayan salt gems are pure and pristine, retaining their original quality for millions of years.
Bring the purity of Himalayan salt to your table with RIVSALT.

1561S-RIC

€9.84

Only 3 left

Zero Tolerance - Sinkevich Flipper Carbon Fiber - ZT0452CF - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing - LIMITED EDITION

ZT0452CF

€278.69

Only 1 left

Rating:

88%

4.4

Out of stock

Zero Tolerance - Sinkevich Folder Titanium - ZT0450 - knife

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

ZT450

€237.70

Only 1 left

Rating:

100%

5

Zero Tolerance - Carbon Fiber Flipper Folder - ZT0770CF - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system Speedsafe

ZT0770CF

€228.69

Only 1 left

Rating:

97%

4.9

Out of stock

Brainstream - BeepEgg Classic - ONE EGG FITS ALL

Brainstream - Beep Egg BOILING EGGS THE EASY WAY - [EGG]STREMELY GOOD GIFTS The singing and floating egg-timer guarantees perfectly boiled eggs and lots of fun. BeepEgg is a precise egg-timer, which is boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play a tune. The inner high t[egg] components of BeepEgg® always work and are “Made in Germany”. This functionality, combined with a certain sense of humour, makes BeepEgg® an ideal gift for numerous occasions. Here is another cool, innovative and fun item that is actually really useful. Do you like your eggs cooked egg-sactly right but have trouble timing them to perfection? The Beep Egg is the solution! The easy way to cook eggs, Beep Egg can sense when the conditions in the pan are just right for an egg to be soft-boiled, medium-cooked or hard-boiled. A temperature sensor detects when the water is boiling and then from that point, a timer will start to count down until the perfect conditions are reached for the ideal egg.Simply put the Beep Egg into the water with your real eggs and cook it in there with them. When the eggs are ready, the Beep Egg will play you a tune! When they are done, you lift the Beep Egg out of the water with your now-perfectly boiled eggs, rinse it off and it is ready to be used next time! The Beep Egg is an ideal gift for anyone who hates cooking but has to boil an egg occasionally, or anyone that loves cooking but has so much on the go at once, they need a little help to keep track of it all! No more morning disappointments - enjoy your eggs exactly as you want them, every time! For those of you with large families with different preferences - use several Egg-Beeps at the same time! The Egg-Beep will play its melody for 3 minutes, or until cooled off using cold water. When not in use, store it in the fridge to keep it at the same temperature as your eggs.

5943

Special Price €11.80 Regular Price €14.75

Only 1 left

PDT - Zero Tolerance - ZT0006 - CPM-3V & OD Green G10 - PRIVATE COLLECTION by Floriano - knife

Exclusive product created in collaboration with the PDT YouTube channel - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.

To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Signs of concrete use on blade finish.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: full tang in CPM-3V steel
Blade treatment: Microbead blasting and Cerakote
Handle: G10 with stainless steel guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex
Packaging: cardboard box with ZT logos.
Notes: knife used in a YouTube video review by Floriano of PDT

PDT-ZT0006-CP

€0.00

Only 0 left

Rating:

100%

5

Out of stock

Zero Tolerance - ZT0630 Emerson Clip Point - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

ZT0630-CP

€0.00

Only 0 left

Out of stock

Zero Tolerance - Emerson Tanto - Carbon Fiber - ZT0620CF - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

APZT620CF

€0.00

Only 0 left

Out of stock

Zero Tolerance - Strider Onion Folder - CPM-MagnaCut Tiger Stripe & Green G10 - SPRINT RUN - ZT0350OLTS - knife

One of our earliest ZTs and still one of our most popular, now offered in a limited run with a CPM-MagnaCut steel blade.

The 0350 is a large and aggressive knife, yet compact and light enough to make it a practical and impressive EDC. The 0350 features ZT's assisted opening system: the blade opens quickly and easily, even with gloves on, thanks to the ambidextrous flipper. The blade is finished with a bold and distinctive tiger stripe pattern made with a tungsten DLC.

Intended Use: Tactical/Military

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade Finish: Tungsten DLC Coating
Handle: G-10
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thickness when closed: 13mm.
Weight: 162g.
Closure: Liner Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run edition with CPM-MagnaCut steel - Design by Mick Strider and Ken Onion - SpeedSafe opening system

ZT0350OLTS

€0.00

Only 0 left

Out of stock

Zero Tolerance - Sinkevich - 20CV Red Blackwash - Factory Special Series - ZT0460RDBW - knife

Intended Use: Sporting/Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Blackwash
Handle: Carbon fiber and Titanium Blackwash
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by Sinkevich - Limited Edition "Factory Special Series"

ZT0460RDBW

€0.00

Only 0 left

Out of stock

Zero Tolerance - Sinkevich knife Flipper Titanium - ZT0456 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

AP-ZT0456-2

€0.00

Only 0 left

Out of stock

Zero Tolerance - Strider Onion - Tigerstripe Black G10 - ZT0303 - PRIVATE COLLECTION - knife

Knife from a private collection - Iconic and sought after model designed by Ken Onion and Mick Strider - Out of production and no longer available - Perfect in all, like new, serial 1544, does not have any kind of sign or defect - The knife shows an uncertainty at the tip, on the sharpening, which is slightly different; presumably already produced in this way by ZT - The sharpening is good and shows no signs of wear, presumably the sharpening is the original factory - Accompanied by original Zero Tolerance box, but referred to the model 0301 with green G10 handle - Checked and certified by our internal laboratory

Intended Use: Collection / Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V
Blade Finish: Tigerstripe - Tungsten DLC Coating
Handle: Titanium and G-10 with 3D finish
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thickness when closed: 17mm.
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Package: Cardboard box with Zero Tolerance logos (the box refers to a different model, 0301)
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system - Like new - Retired from prvated collection

ZT0303-CP

€0.00

Only 0 left

Out of stock

Zero Tolerance - ZT0055BLK - Gus T. Cecchini - Black DLC - Limited Edition Sprint Run - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Black DLC Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thick when closed: 14mm
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: "Sprint Run" Limited Edition available while stocks last - Design by Gustavo T. Cecchini by GTC Knives - KVT opening on ball bearings - SLT Spring Loaded Tab opening system

ZT0055BLK

€0.00

Only 0 left

Out of stock

Mac Coltellerie - San Marco Fighting Knife D2 - knife

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

MAC-SM-D2

€143.44

Only 0 left

Mac Coltellerie Maniago knives, coltelli

Rating:

98%

4.9

Out of stock

Zero Tolerance - ZT0850CF - Sinkevich and Rexford - DLC - Carbon Fiber - Sprint Run - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: U.S.A.
Blade: CPM-20CV stainless steel
Blade treatment: coated & machine satin finish
Handle: Black carbon fiber with aluminum spacers
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 126mm.
Total length: 221mm.
Thick when closed: -
Weight: 122g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Sinkevich & Rexford

ZT0850CF

€0.00

Only 0 left

Out of stock

Zero Tolerance - R.J. Martin Folder Titanium knife - Sprint Run - ZT0609PUR - knife

use: Sportive / Tactical / Collection

Type of production: Industrial
Country of production: U.S.A.
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with purble anodizing
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run Edition 2019 available while stocks last

ZT0609PUR

€0.00

Only 0 left

Out of stock

Zero Tolerance - Hinderer Slicer Frame Lock Tiger Stripe - Black Sprint Run - ZT0562TS - knife

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Ball bearing opening KVT Ball Bearing System - Opening by Carson Flipper system

ZT0562TS

€0.00

Only 0 left

Out of stock

Zero Tolerance - ZT0460TI - Sinkevich - Titanium Sprint Run - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Thickness when closed: -
Weight: 80g.
Closure: Framelock
Clip: Removable, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2019 edition available while stocks last

ZT0460TI

€0.00

Only 0 left

Out of stock

Zero Tolerance - 0462TAN - Sinkevich Flipper - BlackWash G-10 Tan - Sprint Run - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM S35VN stainless steel
Blade treatment: Satin
Handle: G10 Tan
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 225mm.
Weight: 110g.
Closure: Framelock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Carson Flipper opening system - Limited Sprint Run series

ZT0462TAN

€0.00

Only 0 left

Out of stock

Zero Tolerance - Emerson Green Carbon Fiber - ZT0640 - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with green carbon fiber insert
Blade length: 96mm.
Blade thickness: 4mm.
Length closed: 121mm.
Total length: 216mm.
Weight: 125g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Ernest Emerson - Opening by Thumb Disk

ZT0640

€0.00

Only 0 left

Rating:

93%

4.7

Out of stock

Zero Tolerance - Sinkevich Carbon Fiber Flipper - ZT0456CF - Sprint Run - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Length closed: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 139g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run edition available while stocks last - Design by Dmirty Sinkevich - KVT opening on ball bearings

ZT0456CF

€0.00

Only 0 left

Out of stock

Zero Tolerance - ZT0055BRZ - Bronze Titanium - Sprint Run - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded Tab

ZT0055BRZ

€0.00

Only 0 left

Out of stock

Zero Tolerance - Sinkevich Flipper Marbled Carbon Fiber - ZT0470 - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with marbled carbon fiber insert
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Weight: 95g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

ZT0470

€0.00

Only 0 left

Rating:

100%

5

Out of stock

Zero Tolerance - Sinkevich Flipper Blackwash White Carbon Fiber - Sprint Run - ZT0452WBW - knife

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Blackwash
Handle: Blackwash Titanium and White and Black Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: FrameLock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening by Carson Flipper system - Limited edition of Sprint Run

ZT0452WBW

€0.00

Only 0 left

Out of stock

Zero Tolerance - Rexford Folder Black Titanium DLC Sprint Run - ZT0808BLK - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: Black DLC
Handle: Titanium with DLC treatment
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 190mm.
Weight: 126g.
Closing: FrameLock with stainless steel knocker
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings - Limited edition Sprint Run

ZT0808BLK

€0.00

Only 0 left

Rating:

80%

4

Out of stock

Zero Tolerance - R.J. Martin Folder Titanium knife - Sprint Run - ZT0609BLUBLK - knife

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Anodized Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

ZT-0609BLUBLK

€0.00

Only 0 left

Out of stock

Zero Tolerance - Tan DLC Titanium Flipper - Sprint Run - ZT0095TANBLK - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks last

ZT0095TANBLK

€0.00

Only 0 left

Out of stock

Zero Tolerance - ZT0462 - Sinkevich Flipper - Bronze Carbon Fiber - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-S20CV stainless steel
Blade treatment: Satin
Handle: Titanium and bronze-colored carbon fiber
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 225mm.
Weight: 107g.
Closure: Framelock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

ZT0462

€0.00

Only 0 left

Rating:

93%

4.7

Out of stock

Zero Tolerance - Rick Hinderer - Sprint Run - Bronze Titanium Flipper - ZT0393BRZ - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stonewashed
Handle: Titanium anodized and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 119mm.
Total length: 209mm.
Thick when closed: 14mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel with Black DLC treatment, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT opening system on ball bearings with engagement by Carson Flipper system - Sprint Run 2018 edition available while stocks last

ZT0393BRZ

€0.00

Only 0 left

Rating:

100%

5

Out of stock

Zero Tolerance - Rick Hinderer - Blue Titanium Flipper - ZT0393 - knife

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Dual Tone: satin finishing and Black DLC
Handle: Titanium anodized and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 119mm.
Total length: 209mm.
Thick when closed: 14mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel with Black DLC treatment, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT opening system on ball bearings with engagement by Carson Flipper system

ZT0393

€0.00

Only 0 left

Rating:

100%

5

Out of stock

Zero Tolerance - R.J. Martin Folder Titanium - Sprint Run - ZT0609BLK - knife

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with Black Tungsten DLC finish
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

ZT0609BLK

€0.00

Only 0 left

Out of stock

Zero Tolerance - R.J. Martin Folder Titanium - ZT0609 - knife

The new Zero Tolerance 0609 is a smaller, even more carry-ready version of the original Factory Custom 0606CF from ZT, RJ Martin, and Matt Martin. Like the original, it offers a clean, streamlined look yet also has highly detailed handle machining that adds both grip and visual impact. For even more visual “wow,” the 3D-machined handle is built of light-yet-strong titanium that ZT has anodized in an attractive bronze.

The 3.4-inch blade is CPM 20CV, which provides enhanced toughness and resistance to edge chipping. It also delivers superior hardness, corrosion resistance, and excellent edge retention. The drop-point blade has a two-tone finish: machined satin on the grinds with a stonewashed finish on the flats. The new 0609 opens manually with ZT’s KVT ball-bearing opening system and the handy flipper so it’s always ready when you want it.

Last—but certainly not least—you’ll notice the oversized See-Through Pivot (STP). Designed by RJ Martin, this unique, pivot is hollow in the center, letting you “see through” it. The See-Through Pivot adds another intriguing touch to this already-attractive knife.

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin

ZT0609

€0.00

Only 0 left

Rating:

93%

4.7

Out of stock

Zero Tolerance - Flipper Folder Gray Sprint Run - 0770GRYBW - knife

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Gray
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

ZT0770GRYBW

€176.23

Only 0 left

Out of stock

Zero Tolerance - Flipper Folder Sprint Run - ZT0770DBLK - knife

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening system

ZT0770DBLK

€0.00

Only 0 left

Out of stock

Zero Tolerance - Hinderer Slicer Frame Lock - Black Sprint Run - ZT0562BLK - knife

Intended Use: Tactical/Military

Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper System

ZT0562BLK

€0.00

Only 0 left

Out of stock

Zero Tolerance - Todd Rexford Flipper Folder knife - ZT0801TI - knife

Purpose: Sportsman / Collectibles

Type of production: Industrial
Country of production: U.S.A.
Blade: Stainless steel CPM S35VN 60 / 61HRC
Blade Treatment: Stonewash
Manicure: Titanium
Blade Length: 89mm.
Blade thickness: 4mm.
Closed length: 96mm.
Total length: 119mm.
Closed thickness: 13mm.
Weight: 155g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings

ZT0801TI

€0.00

Only 0 left

Out of stock

The brands dealt with by Coltelleria Collini

Last up date

Do you need help?

Coltelleria Collini