Last up date

For easy cutting vegetable garlands of 6 cm width.

For best results set the cutter on its foot and position it with one hand. Use the other hand to stick fruit and vegetable into the cone.

Start rotating.

An end holder helps to process the end pieces for minimum loss.

Hard plastic and stainless steel, 10 x 8,5 x 9 cm, cone Ø 7,5 cm, hardened stainless steel blade, dishwasher-safe.

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

Triangle - Stainless steel quenelle spoon cm 3X20,5

NOVELTY! 

Quenelle or nocken transform any cream or mass into a visual and culinary delight, taking decorative serving and portioning to the next level.

Quenelle line spoons by Triangle are available in two sizes.

The short handle is suitable for ergonomic work from the wrist.

The long handle is suitable for working in deep containers.

The GreenGrip, used for the handles of the Spirit series, is made of 98% bio-based plastic with 40% wood.

There are no limits to your creativity!

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

The Final Touch set consists of a tasting spoon with integrated tweezers, a plate decorator and precision tweezers.

The Final Touch set tools are made of high-quality stainless steel and food-safe silicone.

The Final Touch Set made by triangle® Solingen is dishwasher-safe.

Double-sided triangle Melon Baller Ø 22/25 mm (0.85 / 1 inches) with sharpened edges creates balls from fruits, vegetables, cream or butter.

Stainless steel and dishwasher-safe.

Made in Solingen/Germany.

More and more consumers buy with their eyes first and perceive details that we sometimes don't pay attention to. The way in which products are presented and the way in which the fruit and vegetable counter is set up is therefore becoming truly strategic! A successful and appealing idea comes from the so-called 'carving' of fruit and vegetables. It seems that the first evidence of the art of fruit and vegetable carving dates back to the end of the 14th century in Thailand. During royal celebrations, fruit sculptures were placed in crowns made of woven banana leaves and given to the river as a sign of purification and thanksgiving. The idea is said to have come from the emperor's wife, who was the first to prepare a buffet of fruit and vegetables transformed into flowers and animals. The secret to achieving impressive sculptures is to buy products with a solid consistency and to use lemon juice to prevent the compositions from turning black. Carrots, tomatoes, pineapples, radishes... are products that stimulate very creative carving. And in this season definitely melon and watermelon. Kitchen utensils from the German company Triangle, designed down to the last detail, created with a great deal of knowledge, with a very simple use and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality tools with excellent sharpness. A wide range of tools for carving and decorating fruit and vegetables.

Triangle - Carving Knife V shape large

Fruit carving knife Kitchen utensils from the German company Triangle, designed down to the smallest detail, created with a great deal of craftsmanship, with very simple handling and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality utensils with excellent sharpness. Wide range of utensils for carving and decorating fruit and vegetables.

Knife for carving and decorating fruit and vegetables, V-shaped and 1.5 cm wide.

Ideal for carving watermelons and melons.

Non-slip handle

Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.

The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)

This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.

Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.

The helmet can accept up to three decorative plumes (sold separately).

Perfect for decorating a tavern, a living room, a business

Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg

Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.

The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.

Dimensions: about 30 x 30 x 20 cm

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.

Intended use: sports / collection

Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Triangle - Straight Chef's Spatula - Kitchen

Designed for decorating with total control it is perfectly suitable for easily spreading icing, cream and cream on cake edges. The blade is flexible, made of stainless steel and is 12 cm long.

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

Triangle - Set taglia spirale -3 pz - Curler

Set Con il pratico set taglia spirale - curler set , le verdure vannno tagliate con facilità per formare spirale decorative di 3 misure.

Il taglia spirale é idoneo per cetrioli, carote, patate e molti altri alimenti solidi. Grazie all' impugnatura è possibile una lavorazione particolarmente sicura e veloce. Idoneo per lavastoviglie.

La Curler set contiene: 3 taglia spirale in diverse dimensioni e una maniglia smontabile.

Antiruggine e lavabili in lavastoviglie.

Museum Replicas Windlass - Studded Leather Tunic 100028 - fantasy clothing

Tunica in heavy black leather thigh height that allows greater freedom of movement.

attention: the cape shown in picture is not included.

It is a high-quality tool used for a variety of tasks in professional and domestic settings. Weyersberg Solingen is a renowned brand for manufacturing scissors and other precision cutting tools.

This type of working scissors is ideal for cutting heavy and light fabrics and other materials. It is also used in various industries, such as fashion, crafts, and manufacturing, to make precise and clean cuts.

The ergonomic handle design provides a comfortable grip and reduces hand fatigue during prolonged use.

Recommended use: Cutting heavy and light fabrics and other materials.

Country of manufacture: Germany

Material: nickel-plated steel 

Blade length: 8cm.

Total length: 16.5cm.

Packaging: Plastic bag

Weight: 64g.

It is a high-quality tool used for a variety of tasks in professional and domestic settings. Weyersberg Solingen is a renowned brand for manufacturing scissors and other precision cutting tools.

This type of working scissors is ideal for cutting heavy and light fabrics and other materials. It is also used in various industries, such as fashion, crafts, and manufacturing, to make precise and clean cuts.

The ergonomic handle design provides a comfortable grip and reduces hand fatigue during prolonged use.

Recommended use: Cutting heavy and light fabrics and other materials.

Country of manufacture: Germany

Material: nickel-plated steel 

Blade length: 6.5cm.

Total length: 14cm.

Packaging: Plastic bag

Weight: 56g.

Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"

Handcrafted by Windlass Steelcrafts® expert blacksmiths

- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hilt

Blade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.

© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.

It is a high-quality tool used for a variety of tasks in professional and domestic settings. Weyersberg Solingen is a renowned brand for manufacturing scissors and other precision cutting tools.

This type of working scissors is ideal for cutting heavy and light fabrics and other materials. It is also used in various industries, such as fashion, crafts, and manufacturing, to make precise and clean cuts.

The ergonomic handle design provides a comfortable grip and reduces hand fatigue during prolonged use.

Recommended use: Cutting heavy and light fabrics and other materials.

Country of manufacture: Germany

Material: nickel-plated steel 

Blade length: 7.5cm.

Total length: 15.5cm.

Packaging: Plastic bag

Weight: 60g.